Open Access
| Issue |
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
|
|
|---|---|---|
| Article Number | 03012 | |
| Number of page(s) | 10 | |
| Section | Additive and Near Net Shape Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/202032103012 | |
| Published online | 12 October 2020 | |
- W B du Preez, JOM, 71(2) (2019) 655-661 [CrossRef] [Google Scholar]
- D. de Beer, W. du Preez, H. Greyling, F. Prinsloo, F. Sciammarella, N. Trollip, M. Vermeulen, with contributions from Terry Wohlers, “A South African Additive Manufacturing Strategy”, Department of Science and Technology, April 2016, http://www.rapdasa.org/wpcontent/uploads/2017/02/South-African-Additive-Manufacturing-Strategy. Accessed 3 April 2019. [Google Scholar]
- International Standards Organisation. 2012. 14971: Medical devices – Application of risk management to medical devices. Switzerland: International Standards Organisation. [Google Scholar]
- International Standards Organisation. 2016. 13485: Medical devices – Quality management systems – requirements for regulatory purposes. Switzerland: International Standards Organisation. [Google Scholar]
- J. Els, Optimal process parameters for Direct Metal Laser Sintering of Ti64 for medical implant production, MTech Dissertation, Central University of Technology, Free State (2016) [Google Scholar]
- P. Krakhmalev, G. Fredriksson, I. Yadroitsava, N. Kazantseva, A. Du Plessis, I. Yadroitsev, Phys. Procedia, 83 (2016) 778-788 [CrossRef] [Google Scholar]
- K. Thejane, Characterisation and monitoring of Ti6Al4V ELI powder used for the qualification of medical implants produced through additive manufacturing, M.Eng. dissertation, Central University of Technology, Free State (2018) [Google Scholar]
- Moletsane M.G., Krakhmalev P., Kazantseva, N., Du Plessis, A., Yadroitsava I., Yadroitsev I., S. Afr. J. Ind. Eng. 27(3) (2016) 110-121 [Google Scholar]
- L.B. Malefane, W.B. du Preez, M. Maringa & A. du Plessis, S. Afr. J. Ind. Eng. 29(3) (2018) 299-311. [Google Scholar]
- A M Muiruri, Investigation of high strain rate behaviour and Impact toughness of Ti6Al4V (ELI) parts built by the EOS M280 DMLS system with standard process parameters; as built and stress relieved, MEng Dissertation, Central University of Technology, Free State (2019) [Google Scholar]
- AM Muiruri, M Maringa, W B du Preez & LM Masu, International Conference on Competitive Manufacturing (COMA ‘19) Proceedings, 30 January to 1 February 2019, Stellenbosch, South Africa, 174-180, ISBN: 978-0-7972-1779-9 [Google Scholar]
- K. Thejane, S. Chikosha, W.B. du Preez, S. Afr. J. Ind. Eng. 28(3) (2017) 161-171 [Google Scholar]
- A. du Plessis, P. Sperling, A. Beerlink, W.B. du Preez, S.G. le Roux, MethodsX 5 (2018) 1336-1345, [CrossRef] [Google Scholar]
- A.M. Muiruri, M. Maringa, W.B. du Preez & L.M. Masu, S. Afr. J. Ind. Eng. 29(3) (2018) 284-298. [Google Scholar]
- AM Muiruri, M Maringa, WB du Preez, L Masu, Additive Manufacturing of Titanium Parts pre-conference seminar, International onvention Centre, Durban, 7 November 2017, RAPDASA 2017 Conference Proceedings, 165-179, ISBN: 978-0-620-77329-4 [Google Scholar]
- CRPM ISO 13485:2016 Quality Management System (in-house document), Central University of Technology, Free State (2018) [Google Scholar]
- I. Yadroitsev, P. Krakhmalev, I. Yadroitsava and A. du Plessis, Qualification of Ti6Al4V ELI alloy produced by laser powder bed fusion for biomedical applications, JOM, 70(3) (2018) 372-377 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.