| Issue |
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
|
|
|---|---|---|
| Article Number | 11057 | |
| Number of page(s) | 4 | |
| Section | Microstructure - Properties Relationships | |
| DOI | https://doi.org/10.1051/matecconf/202032111057 | |
| Published online | 12 October 2020 | |
Study on Microstructure and Mechanical Properties of Powder Metallurgy TA15 Titanium Alloy
a State Key Laboratory of Light Alloy Casting Technology for High-end Equipments, Shenyang Reserch Institute of Foundry Co., Ltd, Shenyang, China
b South Center of China Academy of Machinery Science and Technology Group Co., Ltd, Ningbo, China
TA15 pre-alloyed powder chosen in this paper is made by plasma rotating electrode method. The powders were used to prepare fully dense TA15 alloy ingots by the means of hot isostatic pressing(HIP) forming technology. The optimum parameter of the HIP process is 900°C /120MPa/3h. After the process of hot isostatic pressing, the powders were pressed into a fully dense ingot. An optital microscope was used to observe the microstructure of the ingot specimen and its formation mechanism was analysized. The microstructure of the TA15 alloy prepared by hot isostatic pressing of pre-alloyed powder is composed of fine α-equiaxed grains along lamellar colony boundaries. The mechanical properties exceed that of the casting level, which is close to the forging level. A typical TA15 alloy component was finally produced by HIP-PM process.
Key words: Powder metallurgy / TA15 alloy / Microstructure / Mechanical properties
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.