EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 321 (2020) MATEC Web Conf., 321 (2020) 01007 References
Open Access
Issue
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
Article Number 01007
Number of page(s) 12
Section Plenary Lectures
DOI https://doi.org/10.1051/matecconf/202032101007
Published online 12 October 2020
  1. FAA Aerospace Forecast 2019-2039 [Google Scholar]
  2. ITA Executive Summary from Titanium USA 2018 conference [Google Scholar]
  3. W.E. Frazier, MRS Bulletin, Col. 41, 10/2016 [Google Scholar]
  4. M. Qian, et al., Titanium Powder Metallurgy – Science, Technology and Applications, Elsevier, Oxford, 2015 [Google Scholar]
  5. E.D. Herderick, JOM, 67, No. 3, 2015 [Google Scholar]
  6. H. Phelps, Personal Communication, Lockheed Martin Corporation, 2019 [Google Scholar]
  7. M. Chastka, “Arconic WDED Additive Manufacturing and the Ampliforge™ Process” - FIA/FIERF Forging Industry Technical Conference 2018 Long Beach https://www.forging.org/conference-presentations [Google Scholar]
  8. H. Phelps, Personal Communication, Lockheed Martin Corporation, 2019 [Google Scholar]
  9. H. Phelps, Personal Communication, Lockheed Martin Corporation, 2019 [Google Scholar]
  10. B.J. Hayes, et al., “Predicting tensile properties of Ti-6Al-4V produced via directed energy deposition”, Acta Mater 133 (2017) 120-133 [CrossRef] [Google Scholar]
  11. I. Ghamarian, et al., “A Constitutive Equation Relating Composition and Microstructure to Properties in Ti-6Al-4V: As Derived Using a Novel Integrated Computational Approach”, Metal Trans A, Vol. 46A, 2015 [Google Scholar]
  12. K. Calvert, Timet, Personal Communication [Google Scholar]
  13. F. Sun, et al, “Improved Oxidation Resistance in Titanium Alloy RTI-THORTM”, AeroMat 2017 [Google Scholar]
  14. V. Khademi, et al, “The Elevated-Temperature Strength enhancement of a low-cost beta Titanium Alloy Through Thermomechanically-Induced Phase Transformation”, JOM, Issue 7, P71 [Google Scholar]
  15. M. Dahar, et al, “Evolution of fatigue crack growth and fracture behavior in gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) forgings”, International Journal of Fatigue, 111(2018) 54-69 [CrossRef] [Google Scholar]
  16. Y. Zhang, et al, “Thermodynamic Destabilization of Ti-O Solid Solution by H2 and Deoxygenation of Ti Using Mg”, Journal of the American Chemical Society, 2016, 138: 6916-6919 [CrossRef] [Google Scholar]
  17. Z. Zak Fang, et al, “Hydrogen Sintering of Titanium to Produce High Density Fine Grain Titanium Alloys”, Advanced Eng. Materials, 14 (2012), p. 383-387 [CrossRef] [Google Scholar]
  18. D. Sanders, Personal Communication, Boeing, 2019 [Google Scholar]
  19. J. Cotton, Personal Communication, Boeing, 2019 [Google Scholar]
  20. Zhen Huang, Personal Communication, Arconic, 2019 [Google Scholar]
  21. K. Faller, “ The Largest Cost Reduction Opportunity for Titanium Manufacturing in a Quarter Century: Electrochemical Conditioning and Finishing” 2015 ITA Conference [Google Scholar]
  22. E. Crist, et al, “Advancement of Plasma Cold-Hearth Melting for Production of Gamma Titanium Aluminide Alloys within Arconic”, TMS 2017, San Diego, CA, USA [Google Scholar]
  23. V. Venaktesh, et. al., An ICME Framework for Incorporating Bulk Residual Stresses in Rotor Component Design, IMMI, 2018, https://doi.org/10.1007/s40192-018-0119-6 [Google Scholar]
  24. M. Glavicic, et. al., “Advanced Titanium Alloy Fatigue Modeling”, to be published in 2019 World Titanium Conference [Google Scholar]
  25. V. Venkatesh, et. al., ICME of Microtexture Evolution in Dual Phase Titanium Alloys, 13th World Titanium Conference Proceedings, TMS, 2015 [Google Scholar]
  26. M. Sangid, K. Kapoor, Personal communication, Purdue University, 2019 [Google Scholar]
  27. S. Ghosh, Personal Communication, Johns Hopkins University, 2019 [Google Scholar]
  28. NASA 2040 Report, “A Roadmap for Integrated, Multiscale Modeling and Simulation of Materials and Systems”, Contract NNC15BA06B http://www.sti.nasa.gov/, 2018 [Google Scholar]
  29. R. Noraas, et. al., “Structural Material Property Tailoring Using Deep Neural Networks”, AIAA SCITECH 2019 [Google Scholar]
  30. A. Mann, et al, “An ICME Approach to Linear Friction Welding of Near-Net Shape Titanium Aerospace Structural Components”, DMC 2017 [Google Scholar]
  31. D. Li, et al., Abnormal Beta Grain(ABG) Indicator Development, Arconic Studies, 2018 [Google Scholar]
  32. A.L. Pilchak, “Characterizing and Modeling the Precursors to Coarse Grain Formation during Beta-Annealing of Ti-6Al-4V”, 2019 World Titanium Conference” [Google Scholar]
  33. J. Adkins, “Designing with Titanium for Strengthening Concrete Bridges”, Concrete Repair Bulletin, V. 31, No. 5, International Concrete Repair Institute, St. Paul, MN September/October 2018 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.