EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 321 (2020) MATEC Web Conf., 321 (2020) 11027 References
Open Access
Issue
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
Article Number 11027
Number of page(s) 16
Section Microstructure - Properties Relationships
DOI https://doi.org/10.1051/matecconf/202032111027
Published online 12 October 2020
  1. S.P. Lynch et al: Failures of welded titanium aircrafts ducts, Engineering Failure Analysis, Vol. 2, No. 4, 1995, pp. 257-273. [CrossRef] [Google Scholar]
  2. C.A.R.P. Baptista et al: High temperature cyclic pressurization of titanium ducts for use in aircraft pneumatic systems, Materials and Design 30 (2009), pp. 1503-1510. [Google Scholar]
  3. S.M. Carvalho et al: Simulating the damage accumulation in aircraft bleed system ducts joined by laser and arc welding processes, Procedia Engineering 10 (2011), pp. 1321-1326. [CrossRef] [Google Scholar]
  4. A.M.L. Adip et al: Aircraft engine bleed system tubes: Material and failure mode analysis, Engineering Failure Analysis 14 (2007), pp. 1605-1617. [CrossRef] [Google Scholar]
  5. R. Boyer et al (Eds): Materials Properties Handbook: Titanium Alloys, ASM International, 1994. [Google Scholar]
  6. https://www.skybrary.aero/index.php/Bleed_Air_Systems (accessed 20.04.2019) [Google Scholar]
  7. W. Yonggang et al: Summary and Analysis of the Aging Aircrafts’ Failure, The 2nd International Symposium on Aircraft Airworthiness (ISAA 2011), Proceedia Engineering 17 (2011), pp. 303-309. [CrossRef] [Google Scholar]
  8. G. Lütjering, J.C. Williams: Titanium, 2nd Edition, Springer-Verlag Berlin Heidelberg 2003, 2007. [Google Scholar]
  9. Properties of TIMETAL® Exhaust XT, Sheet + Tubes for Automotive Exhaust Applications, April 2010, Henderson Technical Laboratory, TIMET. [Google Scholar]
  10. S+D Speciality Metals UK Limited: KSTI-1.2 ASN [Google Scholar]
  11. S. Jurendić, S. Gaiani: Deep drawing simulation of a-titanium alloys using LS-Dyna, 8th European LS-DYNA Users Conference, Strasbourg, May 2011, pp. 1-8. [Google Scholar]
  12. K.H. Leong, H. K Geyer (1998, November). Laser beam welding of any metal. In International Congress on Applications of Lasers & Electro-Optics (Vol. 1998, No. 1, pp. F242-F250). LIA. [CrossRef] [Google Scholar]
  13. N. Kashaev et al: Microstructure and Mechanical Properties of Laser Beam Welded Joints between Fine-Grained and Standard Ti-6Al-4V Sheets Subjected to Superplastic Forming, Advanced Engineering Materials 17 (3) 2015 pp. 374-382. [CrossRef] [Google Scholar]
  14. F. Fomin et al: Effect of Microstructure Transformations on Fatigue Properties of Laser Beam Welded Ti-6Al-4V Butt Joints Subjected to Postweld Heat Treatment, in: Tanski, T.; Borek, W. (Eds.): Study of Grain Boundary Character. 2017. pp. 111-141. [Google Scholar]
  15. E. Maawad et al: Influence of crystallographic texture on the microstructure, tensile properties and residual stress state of laser-welded titanium joints, Materials and Design 101 (2016), pp. 137-145. [CrossRef] [Google Scholar]
  16. S.T. Auwal et al: A review on laser beam welding of titanium alloys, The International Journal of Advanced Manufacturing Technology, 97 (1-4) (2018) pp. 1071-1098. [CrossRef] [Google Scholar]
  17. S. Panda et al: Orientation dependent mechanical properties of commercially pure (cp) titanium, Materials Characterization 98 (2014), pp. 93-101. [CrossRef] [Google Scholar]
  18. S. Sinha, N.P. Gurao: The role of crystallographic texture on load reversal and low cycle fatigue performance of commercially pure titanium, Materials Science and Engineering A 691 (2017), pp. 100-109. [CrossRef] [Google Scholar]
  19. Titan Grade 2/Titane Grade 2, thyssenkrupp Materials Schweiz, www.thyssenkrupp.ch. (accessed 20.04.2019) [Google Scholar]
  20. Titan Grade 4/Titane Grade 4, thyssenkrupp Materials Schweiz, www.thyssenkrupp.ch. (accessed 20.04.2019) [Google Scholar]
  21. K.-H. Schwalbe et al: EFAM GTP 94: The GKSS test procedure for determining the fracture behaviour of materials, GKSS External Report 94/E/60, 1994, Geesthacht, Germany [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.