| Issue |
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
|
|
|---|---|---|
| Article Number | 11068 | |
| Number of page(s) | 6 | |
| Section | Microstructure - Properties Relationships | |
| DOI | https://doi.org/10.1051/matecconf/202032111068 | |
| Published online | 12 October 2020 | |
Study of oxygen content in titanium alloys after exposure at elevated temperature
1 PSC VSMPO-AVISMA Corporation, Parkovaya st. 1, Verkhnaya Salda 624760, Russia
2 Ural Federal University, Mira st. 19, Ekaterinburg 620002, Russia
Email*, kalienko@vsmpo.ru
Isothermal oxidation testing of near α titanium alloys VT18U, VT20, Ti6Al7Nb and Ti6242S was performed in air at 560 °С for 1000 hours. Parameters of diffusion layer on the alloy surfaces were studied by microhardness indentations, optical microscopy, X-ray diffraction analysis and nuclear microanalysis. It was established that concentration of oxygen in diffusion layer of tested alloys after oxidation differs significantly. An approach was demonstrated and validated by nuclear microanalysis data that allows comparative evaluation of the total concentration of interstitial impurities in the diffusion layer by the X-ray diffraction method.
Key words: titanium alloys / oxidation / diffusion / latice parameters / X-ray diffraction analysis
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.