EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 321 (2020) MATEC Web Conf., 321 (2020) 08001 References
Open Access
Issue
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
Article Number 08001
Number of page(s) 6
Section Intermetallics and MMCs
DOI https://doi.org/10.1051/matecconf/202032108001
Published online 12 October 2020
  1. Appel F, Oehring M, Wagner R. Novel design concepts for gamma-base titanium aluminide alloys. Intermetallics 2000;8:1283e312. [CrossRef] [Google Scholar]
  2. Loria E A. Quo vadis gamma titanium aluminide. Intermetallics 2001;9: 997e1001. doi:10.1016/S0966-9795(01)00064-4 [Google Scholar]
  3. Loretto M H., Hu D., Li Y G.: Microstructural studies on some ordered Ti-based alloys. Intermetallics 2000;8:1243e9. [CrossRef] [Google Scholar]
  4. Kothari, K., Radhakrishnan, R.u. Wereley, N. M.: Advances in gamma titanium aluminides and their manufacturing techniques. Progress in Aerospace Sciences 55 (2012), S. 1-16 [CrossRef] [Google Scholar]
  5. Appel F, Paul, Jonathan David Heaton, Oehring M. Gamma titanium aluminide alloys: Science and technology. Weinheim, Germany: Wiley-VCH; 2011. [CrossRef] [Google Scholar]
  6. Aguilar J, Schievenbusch A, Kättlitz O. Investment casting technology for production of TiAl low pressure turbine blades – Process engineering and parameter analysis. Intermetallics 2011;19(6):757-61. [CrossRef] [Google Scholar]
  7. Rittinghaus S-K, Hecht U, Werner V, Weisheit A. Heat treatment of laser metal deposited TiAl TNM alloy. Intermetallics 2018; 95: 94-101. [CrossRef] [Google Scholar]
  8. Gussone J, Hagedorn Y-C, Gherekhloo H, Kasperovich G, Merzouk T, Hausmann J. Microstructure of γ-titanium aluminide processed by selective laser melting at elevated temperatures. Intermetallics 2015; 66: 133-40. [CrossRef] [Google Scholar]
  9. Biamino S, Penna A, Ackelid U, Sabbadini S, Tassa O, Fino P et al. Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigation. Intermetallics 2011;19(6):776-81. [CrossRef] [Google Scholar]
  10. Thomas M, Malot T, Aubry P. Laser Metal Deposition of the Intermetallic TiAl Alloy. Metall and Mat Trans A 2017;192(193):519. [Google Scholar]
  11. Clemens H, Mayer S. Pulvermetallurgie von intermetallischen Titanaluminiden. BHM (2015) Vol. 160 (10-11): 513-516. doi:10.1007/s00501-015-0411-0 [Google Scholar]
  12. Clark, S. F.: 787 propulsion system. AERO Magazine, quarter 3, 2012. Available http://www.boeing.com/commercial/aeromagazine/articles/2012_q3/index.html [Google Scholar]
  13. Voice W. The future use of gamma titanium aluminides by Rolls‐Royce. Aircraft Engineering and Aerospace Technology 1999, Vol. 71 Issue: 4, pp.337-340. doi:10.1108/00022669910371031 [CrossRef] [Google Scholar]
  14. Janschek P. Wrought TiAl blades. Conference MEFORM 2015: Light Metals - Forming Technologies and Further Processing. Materials Today: Proceedings 2S (2015) S92-S97 [Google Scholar]
  15. M.F. Arenas, V.L. Acoff, The effect of postweld heat treatment on gas tungsten arc welded gamma titanium aluminide, Scripta Mater. 46 (3) (2002) 241-246. [Google Scholar]
  16. D. Herrmann, F. Appel, Diffusion bonding of γ(TiAl) alloys: influence of composition, microstructure, and mechanical properties, Metall. Mater. Trans. A 40 (8) (2009) 1881-1902. [Google Scholar]
  17. K. Hauschildt, A. Stark, U. Lorenz, N. Schell, T. Fischer, M. Blankenburg, et al., Diffusion brazing of γ-TiAl-alloys: investigations of the joint by electron microscopy and high-energy X-ray diffraction, MRS Proc. 1516 (2013) 319. [Google Scholar]
  18. Castellanos, S., Cavaleiro, A., Jesus, A. de, Neto, R., & Alves, J. L. (2019). Machinability of titanium aluminides: A review. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(3), 426-451. https://doi.org/10.1177/1464420718809386 [Google Scholar]
  19. Jüchter V. Grundlagen des Selektiven Elektronenstrahlschmelzens von Titanaluminiden. January 2019, Doctoral Thesis. [Google Scholar]
  20. Vogelpoth A, Rittinghaus S-K, Schleifenbaum H. Laser additive manufacturing of titanium aluminides for turbomachinery applications. To be published in: Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition GT2019, June 17-21, 2019, Phoenix, Arizona, USA [Google Scholar]
  21. Clemens, H. Boeck, B., Wallgram, W., Schmoelzer, T., Droessler, L. M., Zicker, G. A., Leitner, H. and Otto, A.: Experimental studies and thermodynamic simulations of phase transformations in Ti-(41-45)Al-4Nb-1Mo-0.1B alloys. Mater. Res. Soc. Symp. Proc. 1128, U03 (2009). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.