Open Access
Issue
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
Article Number 11094
Number of page(s) 4
Section Microstructure - Properties Relationships
DOI https://doi.org/10.1051/matecconf/202032111094
Published online 12 October 2020
  1. Estrin Y, Vinogradov A. Extreme grain refinement by severe plastic deformation: A wealth of challenging science. Acta Mater 2013;61:782-817. doi:10.1016/j.actamat.2012.10.038. [Google Scholar]
  2. Lowe TC, Valiev RZ. The use of severe plastic deformation techniques in grain refinement. JOM J Miner Met Mater Soc 2004;56:64-8. doi:10.1007/s11837-004-0295-z. [CrossRef] [Google Scholar]
  3. Ovid’ko IA, Valiev RZ, Zhu YT. Review on superior strength and enhanced ductility of metallic nanomaterials. Prog Mater Sci 2018;94:462-540. doi:10.1016/j.pmatsci.2018.02.002. [Google Scholar]
  4. Bagheri S, Guagliano M. Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys. Surf Eng 2009;25:3-14. doi:10.1179/026708408X334087. [Google Scholar]
  5. Grosdidier T, Novelli M. Recent Developments in the Application of Surface Mechanical Attrition Treatments for Improved Gradient Structures: Processing Parameters and Surface Reactivity. Mater Trans 2019;60:1344-55. doi:10.2320/matertrans.MF201929. [Google Scholar]
  6. Lu K, Lu J. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment. Mater Sci Eng A 2004;375-377:38-45. doi:10.1016/j.msea.2003.10.261. [Google Scholar]
  7. Wang CT, Gao N. Gee MG, Wood RJK, Langdon TG. Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsion. Wear 2012;280-281:28-35. doi:10.1016/j.wear.2012.01.012. [Google Scholar]
  8. Edalati K, Ashida M. Horita Z. Matsui T. Kato H. Wear resistance and tribological features of pure aluminum and Al-Al2O3composites consolidated by high-pressure torsion. Wear 2014;310:83-9. doi:10.1016/j.wear.2013.12.022. [Google Scholar]
  9. Alikhani Chamgordani S. Miresmaeili R. Aliofkhazraei M. Improvement in tribological behavior of commercial pure titanium (CP-Ti) by surface mechanical attrition treatment (SMAT). Tribol Int 2018;119:744-52. doi:10.1016/j.triboint.2017.11.044. [Google Scholar]
  10. Sun Y. Sliding wear behaviour of surface mechanical attrition treated AISI 304 stainless steel. Tribol Int 2013;57:67-75. doi:10.1016/j.triboint.2012.07.015. [Google Scholar]
  11. Liu Y, Jin B. Li DJ, Zeng XQ, Lu J. Wear behavior of nanocrystalline structured magnesium alloy induced by surface mechanical attrition treatment. Surf Coatings Technol 2015;261:219-26. doi:10.1016/j.surfcoat.2014.11.026. [Google Scholar]
  12. Xia S, Liu Y. Fu D. Jin B. Lu J. Effect of Surface Mechanical Attrition Treatment on Tribological Behavior of the AZ31 Alloy. J Mater Sci Technol 2016;32:1245-52. doi:10.1016/j.jmst.2016.05.018. [Google Scholar]
  13. Novelli M, Bocher P. Grosdidier T. Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment. Mater Charact 2018;139:197-207. doi:10.1016/j.matchar.2018.02.028. [Google Scholar]
  14. SONATS Europe Technologies group. Sonats 2019. http://www.sonats-et.fr/. [Google Scholar]
  15. Novelli M, Fundenberger JJ, Bocher P. Grosdidier T. On the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature. Appl Surf Sci 2016;389:1169-74. doi:10.1016/j.apsusc.2016.08.009. [Google Scholar]
  16. Zhu KY, Vassel A. Brisset F. Lu K. Lu J. Nanostructure formation mechanism of α-titanium using SMAT. Acta Mater 2004;52:4101-10. doi:10.1016/j.actamat.2004.05.023. [Google Scholar]
  17. Maurel P, Weiss L. Bocher P. Fleury E. Grosdidier T. Oxide dependent wear mechanisms of titanium against a steel counterface: Influence of SMAT nanostructured surface. Wear 2019;430-431:245-55. doi:10.1016/j.wear.2019.05.007. [Google Scholar]
  18. Wen M, Wen C. Hodgson PD, Li YC. Tribological behaviour of pure Ti with a nanocrystalline surface layer under different loads. Tribol Lett 2012;45:59-66. doi:10.1007/s11249-011-9862-y. [Google Scholar]
  19. Hanaor DAH, Sorrell CC. Review of the anatase to rutile phase transformation. J Mater Sci 2011;46:855-74. doi:10.1007/s10853-010-5113-0. [Google Scholar]
  20. Anthony JW, Bideaux RA, Bladh KW, Nichols MC. Handbook of Mineralogy. vol. 1. Chantilly: Mineralogical Society of America; 1990. doi:10.1016/S0016-2361(99)00011-3. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.