Open Access
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
Article Number 12029
Number of page(s) 9
Section Microstructure Evolution
Published online 12 October 2020
  1. G. Lütjering and J.C. Williams, Titanium. Berlin: Springer-Verlag, 2003. [CrossRef] [Google Scholar]
  2. F.H. (Sam) Froes, ‘1.1 - Titanium for medical and dental applications—An introduction’, in Titanium in Medical and Dental Applications, F.H. Froes and M. Qian, Eds. Woodhead Publishing, 2018, pp. 3-21. [Google Scholar]
  3. Z.Z. Fang et al., ‘Powder metallurgy of titanium – past, present, and future’, Int. Mater. Rev., vol. 63, no. 7, pp. 407-459, Oct. 2018. [CrossRef] [Google Scholar]
  4. B. Dutta and F.H. (Sam) Froes, ‘The Additive Manufacturing (AM) of titanium alloys’, Met. Powder Rep., vol. 72, no. 2, pp. 96-106, Mar. 2017. [CrossRef] [Google Scholar]
  5. J. Kozlík, J. Stráský, P. Harcuba, I. Ibragimov, T. Chráska, and M. Janeček, ‘Cryogenic Milling of Titanium Powder’, Metals, vol. 8, no. 1, p. 31, Jan. 2018. [Google Scholar]
  6. J. Disegi, Implant Materials. Wrought Titanium -15% Molybdenum. Synthes, 2009. [Google Scholar]
  7. P. Zháňal et al., ‘Evolution of ω phase during heating of metastable β titanium alloy Ti–15Mo’, J. Mater. Sci., vol. 53, no. 1, pp. 837-845, Jan. 2018. [CrossRef] [Google Scholar]
  8. K. Bartha et al., ‘Inhomogeneous Precipitation of the α-Phase in Ti15Mo Alloy Deformed by ECAP’, Trans Tech Publ., no. 941, pp. 1183-1188, 2018. [Google Scholar]
  9. K. Bartha, J. Stráský, P. Harcuba, I. Semenova, V. Polyakova, and M. Janeček, ‘Heterogeneous Precipitation of the α-Phase in Ti15Mo Alloy Subjected to High Pressure Torsion’, ACTA Phys. Pol. A, no. 134, pp. 790-793, 2018. [CrossRef] [Google Scholar]
  10. J. Šmilauerová et al., ‘Ageing response of sub-transus heat treated Ti–6.8Mo–4.5Fe–1.5Al alloy’, J. Alloys Compd., vol. 724, pp. 373-380, Nov. 2017. [CrossRef] [Google Scholar]
  11. S.L. Semiatin, S.L. Knisley, P.N. Fagin, D.R. Barker, and F. Zhang, ‘Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V’, Metall. Mater. Trans. A, vol. 34, no. 10, pp. 2377-2386, Oct. 2003. [CrossRef] [Google Scholar]
  12. G. Welsch, R. Boyer, and E.W. Collings, Materials Properties Handbook: Titanium Alloys. ASM International, 1993. [Google Scholar]
  13. Z. Liu and G. Welsch, ‘Effects of oxygen and heat treatment on the mechanical properties of alpha and beta titanium alloys’, Metall. Trans. A, vol. 19, no. 3, pp. 527-542, Mar. 1988. [CrossRef] [Google Scholar]
  14. K. Václavová et al., ‘Microhardness and microstructure evolution of ultra-fine grained Ti-15Mo and TIMETAL LCB alloys prepared by high pressure torsion’, Mater. Sci. Eng. A, vol. 682, pp. 220-228, Jan. 2017. [CrossRef] [Google Scholar]
  15. P. Zháňal et al., ‘Phase Transformations in Ti-15Mo Investigated by in situ Electrical Resistance’, Acta Phys. Pol. A, vol. 128, no. 4, pp. 779-782, 2015. [CrossRef] [Google Scholar]
  16. J. Syarif, T.N. Rohmannudin, M.Z. Omar, Z. Sajuri, and S. Harjanto, ‘Stability of the beta phase in Ti-Mo-Cr alloy fabricated by powder metallurgy’, J. Min. Metall. Sect. B Metall., vol. 49, no. 3, pp. 285-292, 2013. [CrossRef] [Google Scholar]
  17. Z. Guo, S. Malinov, and W. Sha, ‘Modelling beta transus temperature of titanium alloys using artificial neural network’, Comput. Mater. Sci., vol. 32, no. 1, pp. 1-12, Jan. 2005. [CrossRef] [Google Scholar]
  18. J.L. Murray and H.A. Wriedt, ‘The O-Ti (Oxygen-Titanium) system’, J. Phase Equilibria, vol. 8, no. 2, pp. 148-165, Apr. 1987. [CrossRef] [Google Scholar]
  19. K. Václavová et al., ‘Ultra-fine grained microstructure of metastable beta Ti-15Mo alloy and its effects on the phase transformations’, IOP Conf. Ser. Mater. Sci. Eng., vol. 194, no. 1, p. 012021, May 2017. [Google Scholar]
  20. J. Gao, A.J. Knowles, D. Guan, and W.M. Rainforth, ‘ω phase strengthened 1.2GPa metastable β titanium alloy with high ductility’, Scr. Mater., vol. 162, pp. 77-81, Mar. 2019. [CrossRef] [Google Scholar]
  21. J. Stráský et al., ‘Increasing strength of a biomedical Ti-Nb-Ta-Zr alloy by alloying with Fe, Si and O’, J. Mech. Behav. Biomed. Mater., vol. 71, pp. 329-336, Jul. 2017. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.