| Issue |
MATEC Web Conf.
Volume 321, 2020
The 14th World Conference on Titanium (Ti 2019)
|
|
|---|---|---|
| Article Number | 11065 | |
| Number of page(s) | 5 | |
| Section | Microstructure - Properties Relationships | |
| DOI | https://doi.org/10.1051/matecconf/202032111065 | |
| Published online | 12 October 2020 | |
Effect of Stress Ratio(R) and Stress Concentration Factor (Kt) on Fatigue Properties of WSTi6211 Titanium Alloy
1 State Key Laboratory of Solidification Processing，Northwest Polytechnical University, Xi’an, Shaanxi 710072, China
2 Western Superconducting Technologies Co., Ltd., Xi’an, Shaanxi 710018, China
3 Xi’an University of Architecture and Technology，Xi’an, Shaanxi 710055, China
* Email: haofang85@163.com
In this paper, the author studied the effects of different stress ratios（R） and stress concentration factors(Kt) on the fatigue properties of WSTi6211 titanium alloy.Through S-N curve, the author obtained the fatigue ultimate strength of the material under different conditions and analyzed characteristics of fatigue fractures, including the crack source sourse, the crack growth region and the final rupture region. The results show that when Kt=1, R=0.5, the fatigue ultimate strength σD is 626MPa; when Kt = 1, R=0.06, the fatigue ultimate strength σD is 527.5MPa; when Kt=3, R=0.06, the ultimate fatigue strength σD is 267MPa. Fatigue performance is very sensitive to R and Kt. The larger R is, the larger the fatigue ultimate strength is. The larger Kt is, the smaller the fatigue limit strength is. The fracture morphology shows typical fatigue fracture morphology. Most of the cracks originate on the surface of specimens and have typical fatigue bands. With the decrease of stress, the area of crack growth zone increases.
Key words: WSTi6211 Titanium Alloy / S-N Curve / Stress Ratio / Stress Concentration Factor
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.