MATEC Web of Conferences

Open Access

Determination of automobile alternator faults using harmonic analysis of external magnetic field 01001

Andrey Puzakov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901001

• Abstract
• PDF (625.5 KB)
• References

Open Access

Development of solid anti-friction elements for greasing the ridges of locomotive wheel pairs 01002

Igor Maiba, Vita Maiba and Dmitry Glazunov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901002

• Abstract
• PDF (250.7 KB)
• References

Open Access

Methodology of application of programmed training in the system of professional training of drivers 01003

Evgeny Ageev, Evgeny Vinogradov, Alexandr Novikov and Alexandr Novikov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901003

• Abstract
• PDF (335.6 KB)
• References

Open Access

On developing an automatic control system for the dump conveyor of a wheel excavator 01004

Yakov Liberman and Olga Lukashuk

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901004

• Abstract
• PDF (189.9 KB)
• References

Open Access

The formation of residual stresses in the bonding of automotive glass 01005

Nikolay Nosov, Roman Grishin, Vladimir Rodionov and Roman Ladyagin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901005

• Abstract
• PDF (421.3 KB)
• References

Open Access

The Quality Monitoring of City Passenger Transportations on Regular Routes Using Data of Objective Control 01006

Nikolay Trubin, Nikolay Yakunin, Natalia Yakunina and Igor Lyubimov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901006

• Abstract
• PDF (671.9 KB)
• References

Open Access

Stand for cyclic tests of rack and pinion steering mechanism 01007

N. S. Solomatin, V. A. Ivliev, L. A. Cherepanov and D. A. Kolodkin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901007

• Abstract
• PDF (283.9 KB)
• References

Open Access

Study of the influence of technical and operational indicators on the efficiency of road transport in intercity traffic 01008

Irina Pogulyaeva, Irina Teterina and Igor Pogulyaev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901008

• Abstract
• PDF (381.7 KB)
• References

Open Access

Investigation of the suspension of vehicles moving on stone roads 01009

Umar Vakhidov, Vladimir Makarov, Vladislav Klubnichkin, Evgeny Klubnichkin and Vladimir Belyakov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901009

• Abstract
• PDF (527.1 KB)
• References

Open Access

The Quality Improvement of City Passenger Traffic on The Basis of the Passenger Capacity Control 01010

Nicolay Trubin, Elena Bondarenko, Igor Lyubimov and Nail Sultanov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901010

• Abstract
• PDF (266.2 KB)
• References

Open Access

Automatic Control of Rail Freight Transport 01011

N. M. Legkiy

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901011

• Abstract
• PDF (212.6 KB)
• References

Open Access

Response of Motor Vehicles, Front and Rear Axles of Which Are Fitted with Different Tires. Main Aspects 01012

Vladimir Makarov, Yuriy Molev, Dimitriy Proshin and Maksim Cherevastov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901012

• Abstract
• PDF (354.3 KB)
• References

Open Access

Formation of management mechanisms for network planning of the transport system of the region 01013

A. N. Novikov, A. G. Shevtsova and S. V. Eremin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901013

• Abstract
• PDF (224.0 KB)
• References

Open Access

Analysis and prospects of container and rail transport 01014

Sergey Vakulenko, Pyotr Kurenkov, Dmitry Romensky, Kirill Kalinin and Jozef Gašparík

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901014

• Abstract
• PDF (404.3 KB)
• References

Open Access

Impact of carrying capacity on the functioning of the railway network 01015

Alexey Volodin, Nadezhda Gudkova, Alexey Astafiev, Vadim Alferov and Jozef Majerčák

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901015

• Abstract
• PDF (297.3 KB)
• References

Open Access

Analysis of the electric vehicle market and the company’s competitive development strategy on it (on the example of “Faraday Future”) 01016

Natalia Reshetko, Sergey Vakulenko, Diana Kakhrimanova, Vladimir Belozerov and Jozef Gašparík

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901016

• Abstract
• PDF (223.7 KB)
• References

Open Access

The transparent discolored glass for industrial and high-speed transport 01017

Regina Khazhiakhmetova, Indira Kashuba, Svetlana Vlasova, Fyodor Kapustin and Rudolf Hela

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901017

• Abstract
• PDF (299.7 KB)
• References

Open Access

Efficiency improvement of technical condition assessment of plunger pairs of diesel fuel equipment 01018

Anatolii Eremeev, Aleksandr Morozov and Dmitry Kotkov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901018

• Abstract
• PDF (269.2 KB)
• References

Open Access

Analysis of the electric motor and transmission for a 4x4 ATV 01019

Kirill Evseev, Alexey Dyakov and Ksenia Popova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901019

• Abstract
• PDF (680.3 KB)
• References

Open Access

Improving the efficiency of the road junction at the city entrance 01020

A. G. Shevtsova, A. G. Burlutskaya, V. V. Vasilieva, K. V. Levshina and E. M. Minaeva

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901020

• Abstract
• PDF (389.5 KB)
• References

Open Access

Development of a transport management system of a flexible production system 01021

I. F. Safin, M. L. Shustrova, N. A. Staroverova and Yu. N. Zatsarinnaya

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901021

• Abstract
• PDF (638.4 KB)
• References

Open Access

Analysis and design solutions for a 4x4 ATV with an electromechanical transmission 01022

Kirill Evseev, Alexey Dyakov and Vadim Pushtakov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901022

• Abstract
• PDF (298.7 KB)
• References

Open Access

Experimental research of motor vehicles on a test bench 01023

Kirill Evseev, Alexey Dyakov and Roman Pashkovskiy

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901023

• Abstract
• PDF (607.5 KB)
• References

Open Access

Justification of priority factors affecting the efficiency of the tractor fleet 01024

V. A. Zubina

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032901024

• Abstract
• PDF (388.6 KB)
• References

Open Access

Analysis of the corrosion behavior of steel reinforcement protected by phosphate coatings 02001

Viktoriya Konovalova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902001

• Abstract
• PDF (330.6 KB)
• References

Open Access

Study of the features of the development of computer-aided design of functional coatings by plasma spraying 02002

Grigory I. Trifonov, Lyubov A. Kukarskikh, Vladimir K. Kiryanov, Dmitry O. Krikunov and Andrey V. Mikhalchenko

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902002

• Abstract
• PDF (623.0 KB)
• References

Open Access

Processes of isothermal formation of hollow t-shaped tubes made of high-strength alloys 02003

Andrey A. Pasynkov, Sergey N. Larin and Lydmila P. Semenova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902003

• Abstract
• PDF (520.5 KB)
• References

Open Access

Formation of bulges on hollow cylindrical products made of non-ferrous difficult-to-deform alloys 02004

Sergey N. Larin and Andrey A. Pasynkov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902004

• Abstract
• PDF (507.0 KB)
• References

Open Access

Investigation of a multicomponent FeCoCrAlTiCuMo alloy coating applied by a combined process based on atmospheric plasma metallization 02005

Anvar Kadyrmetov, Dmitri Popov and Yevgeny Snyatkov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902005

• Abstract
• PDF (890.5 KB)
• References

Open Access

Adhesion resistance of nanocoatings of tool working surfaces 02006

Larissa Frolenkova, Alexander Tarapanov, Michael Selemenev, Alexander Novikov and Elena Selemeneva

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902006

• Abstract
• PDF (154.9 KB)
• References

Open Access

X-ray spectral analysis of sintered articles made of electroerosive lead bronze obtained in lighting kerosene 02007

E.V. Ageev, A.S. Pereverzev and B.N. sabel’nikov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902007

• Abstract
• PDF (222.6 KB)
• References

Open Access

Analysis of surface structure of zirconia crystals in case of friction against steel 02008

Valery Alisin, Mikhail Borik, Alexey Kulebyakin, Elena Lomonova and Irina Suvorova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902008

• Abstract
• PDF (603.5 KB)
• References

Open Access

Using fractal characteristics to analyze the development of whole-rolled wheel destruction 02009

Dmitry Kononov, Svetlana Gubenko, Igor Ivanov and Sergey Urushev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902009

• Abstract
• PDF (543.8 KB)
• References

Open Access

Morphology and Chemical Composition of Silicon Carbide Surface in Interaction with Titanium Alloy under Micro-Scratching Conditions 02010

Vladimir Nosenko, Aleksandr Fetisov, Sergey Nosenko and Valeria Puzyrkova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902010

• Abstract
• PDF (907.6 KB)
• References

Open Access

Investigation of the microstructure and X-ray spectral microanalysis of powder material obtained from waste of the KNT16 brand tungsten-free hard alloy 02011

B.N. Sabel’nikov, A.E. Ageeva, V.O Podanov and M.S Korolev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902011

• Abstract
• PDF (249.4 KB)
• References

Open Access

Effect of gas-dynamic spraying parameters on the characteristics of coatings for steel shaft 02012

Alexey Ponomarev, Sergey Plakhov, Andrew Aksenov and Andrey Popov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902012

• Abstract
• PDF (227.0 KB)
• References

Open Access

Study of the fractional composition of electroerosive powder materials of the tungsten nickel iron alloy obtained in lighting kerosene 02013

E.V. Ageev, N.M. Harakova, S.V Pikalov, M.S Korolev and V.O Podanov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902013

• Abstract
• PDF (263.4 KB)
• References

Open Access

X-ray spectral microanalysis of hardened additive products made of electroerosion cobalt-chromium alloys 02014

E.V. Ageeva, A.Yu. Altukhov, R A. Latypov and G.R. Latypova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902014

• Abstract
• PDF (244.1 KB)
• References

Open Access

Influence of rare earth elements on the structure and properties of powders based on zirconium dioxide during consolidation 02015

Svetlana A. Oglezneva, Maxim N. Kachenyuk, Andrey A. Smetkin and Valentina B. Kul’met’eva

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902015

• Abstract
• PDF (420.2 KB)
• References

Open Access

Determination of structure ordering parameters in subsurface layers of condensed state materials by AMD-methods 02016

Alexander Kustov, Igor Derkachev, Irina Miguel and Mikhail Kulakov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902016

• Abstract
• PDF (1.012 MB)
• References

Open Access

Study of the nickel-phosphorus coating structural-phase states 02017

Igor Shcherbakov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902017

• Abstract
• PDF (272.4 KB)
• References

Open Access

Dynamic Nanostructuring of the Steel Surface Under High-Speed Thermal Heating 02018

Andrey Brover, Galina Brover, Olga Moysova and Valeriya Yankovskaya

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902018

• Abstract
• PDF (496.2 KB)
• References

Open Access

Numerical simulation of the effect of the coating material of contacting surfaces on thermal conductivity 02019

A. D. Ezhov, I. S. Sladkov, L. V. Bykov and N. S. Golikov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902019

• Abstract
• PDF (276.2 KB)
• References

Open Access

The porosity study of sintered products from electro-erosive materials of alloy Cr13, obtained in butyl alcohol 02020

S.V. Khardikov, A.N. Novikov and A.E. Ageeva

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902020

• Abstract
• PDF (370.7 KB)
• References

Open Access

X-ray spectral analysis of sintered products made of electroerosive materials obtained from X17 alloy waste in lighting kerosene 02021

E. V. Ageeva, A. S. Pereverzev and A.A Sysoev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902021

• Abstract
• PDF (301.3 KB)
• References

Open Access

Specifics of joint deformation of fibered composite and homogeneouos materials 02022

V. I. Galkin, A. R. Paltievich and E. V. Galkin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902022

• Abstract
• PDF (222.9 KB)
• References

Open Access

Improving the mechanical properties of zirconia in instrument bearings 02023

V. V. Alisin, B. A. Diethelm, A. V. Kulebyakin, V. A. Myzina and N. Yu. Tabachkova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902023

• Abstract
• PDF (368.2 KB)
• References

Open Access

Porous magnesium scaffolds with biodegradable polycaprolactone coating 02024

Anatoly Podgorbunsky, Dmitry Mashtalyar, Igor Imshineskiy, Sergey Sinebryukhov and Sergey Gnedenkov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902024

• Abstract
• PDF (398.0 KB)
• References

Open Access

Effect provided by dispersed phase on the morphology and properties of composite zinc coatings 02025

R.E. Fomina, G.G. Mingazova, S.V. Vodopyanova and R.S. Sayfullin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902025

• Abstract
• PDF (433.5 KB)
• References

Open Access

Thermodynamic modeling of composition and propereties of self-fluxing materials based on the nickel 02026

Nina Ilinykh, Anastasia Krivorigova, Boris Gelchinski, Sergey Ilinykh and Leonid Kovalev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902026

• Abstract
• PDF (334.0 KB)
• References

Open Access

Modification of aluminum surfaces by supersonic plasma sputtering 02027

Sergey Ilinykh, Anastasia Krivorigova, Nina Ilinykh, Boris Gelchinski and Leopold Leontiev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902027

• Abstract
• PDF (310.7 KB)
• References

Open Access

Quantitative correlations between wear behavior of Ti_1-xAl_xN coating, structural transformations of the substrate WC-Co and coating itself during cathodic arc evaporation 02028

Anna Kameneva, Natalia Kameneva and Vadim Karmanov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902028

• Abstract
• PDF (534.4 KB)
• References

Open Access

Comparison of corrosion, physico-mechanical and wear properties of TiN, ZrN, Ti_xZr_1-xN and Ti_1-xAl_xN coatings 02029

Anna Kameneva, Vadim Karmanov, Sergey Stepanov and Darya Kameneva

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902029

• Abstract
• PDF (299.8 KB)
• References

Open Access

Study of the composition of innovative materials for the restoration and strengthening of machine parts 02030

Andrei Gorin, Ivan Kuznetsov, Tatiana Prokoshina, Elena Byrlakova and Svetlana Kolpakova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902030

• Abstract
• PDF (266.9 KB)
• References

Open Access

Experimental study of the correlation between the elastic modulus of polymer composite materials and the velocity of ultrasonic waves 02031

Dmitrii Chulkov, Alexander Terekhin, Alexander Dumansky and Maxim Tipikin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902031

• Abstract
• PDF (306.6 KB)
• References

Open Access

Investigation of thermodynamic properties of single-layer two-component coatings 02032

Stanislav Vlasov, Aleksey Chikhranov, Aleksandr Averyanov, Valentina Vlasova and Yana Dolzhenko

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902032

• Abstract
• PDF (225.3 KB)
• References

Open Access

Stages of technological process of high anisotropy formation of magnetic properties under «dry» pressing of powder products 02033

Yuri Vernigorov, Valeriy Lebedev, Irina Davidova, Lydianna Chunakhova and Yuri Korolkov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902033

• Abstract
• PDF (370.5 KB)
• References

Open Access

Influence of aluminium and molybdenum on properties of coatings and cutting properties of coated tools 02034

Marina Volosova, Jury Bublikov, Catherine Sotova and Ilya Sadov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902034

• Abstract
• PDF (528.5 KB)
• References

Open Access

Influence of the nanolayer structure of coatings on the cutting properties of tools 02035

Marina Volosova, Jury Bublikov, Catherine Sotova and Ilya Sadov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902035

• Abstract
• PDF (487.7 KB)
• References

Open Access

Kinetic regularities of alloying iron-carbon alloys with vanadium 02036

Alexander Klimov and Michael Zinigrad

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902036

• Abstract
• PDF (328.2 KB)
• References

Open Access

Temperature Dependences of Structural Parameters of PMN in the Region of Diffuse Phase Transition 02037

Alla Lebedinskaya and Angela Rudskaya

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902037

• Abstract
• PDF (243.8 KB)
• References

Open Access

Influence of the composition and synthesis technology on the physical chemical and performance properties of foam materials 02038

Engel Galimov, Nazirya Galimova, Elmira Sharafutdinova, Vladimir Samoylov and Egor Danilov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902038

• Abstract
• PDF (145.1 KB)
• References

Open Access

Study of the influence of synthesis technologies on the properties of syntactic carbon foams 02039

Engel Galimov, Nazirya Galimova, Elmira Sharafutdinova, Vladimir Samoylov and Egor Danilov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902039

• Abstract
• PDF (286.1 KB)
• References

Open Access

A study on an electromagnetic shield with carbon filler 02040

N. M. Legkiy

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902040

• Abstract
• PDF (424.7 KB)
• References

Open Access

Heat treatment as a method of restoring of the material 15Cr12WNiMoV after operational processes 02041

O. B. Berdnik, I. N. Tsareva and L. A. Krivina

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902041

• Abstract
• PDF (549.7 KB)
• References

Open Access

X-ray spectral microanalysis of X13 steel powders obtained by electroerosive dispersion 02042

E. V. Ageeva, S. V. Khardikov and A. N. Novikov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032902042

• Abstract
• PDF (165.6 KB)
• References

Open Access

Providing adaptive properties of the drive of a rotary drilling machine 03001

Mikhail Lemesko, Inessa Deyneka and Aleksey Iliev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903001

• Abstract
• PDF (285.6 KB)
• References

Open Access

Oscillations in a nonlinear spring mechanism with one degree of freedom 03002

Leonid Kondratenko and Lubov Mironova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903002

• Abstract
• PDF (208.3 KB)
• References

Open Access

Investigation of rigid dynamic systems on the example of modelling a tape drive mechanism 03003

Ruslan Nigay, Evgeny Nigay and Lubov Mironova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903003

• Abstract
• PDF (203.8 KB)
• References

Open Access

Deformation and forces when compressing spherical particle 03004

Vladimir Fedyaev, Marat Faskhutdinov and Igor Sidorov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903004

• Abstract
• PDF (280.0 KB)
• References

Open Access

Assessment of components to ensure the security of control and diagnostic information about technological processes 03005

Igor Kotenko and Igor Parashchuk

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903005

• Abstract
• PDF (316.8 KB)
• References

Open Access

Lubrication system of a roller cone bit 03006

Denis Simisinov, Anatoly Afanas’ev, Vitaliy Adas and Anton Simisinov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903006

• Abstract
• PDF (267.3 KB)
• References

Open Access

Experimental study on thermal performance in three-flow cooling tower 03007

Ilnur Madyshev, Ildar Sabanaev, Vitaly Kharkov, Lenar Ganiev and Andrey Dmitriev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903007

• Abstract
• PDF (502.3 KB)
• References

Open Access

Analysis of the geometry and contact density of globoid gearing 03008

Aleksandr Vyatkin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903008

• Abstract
• PDF (516.5 KB)
• References

Open Access

Eigenvibrations of a beam with two mechanical resonators attached to the ends 03009

L. N. Koronova, D. M. Korosteleva, K. O. Levinskaya and S. I. Solov’ev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903009

• Abstract
• PDF (363.1 KB)
• References

Open Access

Analysis of the causes of destruction of gas pipelines 03010

Natalya Volgina, Aleksander Shulgin, Svetlana Khlamkova, Guzel Sharipzyanova and Yakov Vorobyov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903010

• Abstract
• PDF (320.6 KB)
• References

Open Access

Selection of the quantity of the allowance at rough treatment of large – size parts from titanium alloy of BT6 (Russian State Standard GOST 19807-91) 03011

T. V. Lomaeva, S. D. Kugultinov and I. I. Livshits

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903011

• Abstract
• PDF (265.5 KB)
• References

Open Access

Precision processing of ceramics by the raster machine 03012

Karim Muratov, Timur Ablyaz and Yevgeny Gashev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903012

• Abstract
• PDF (432.9 KB)
• References

Open Access

Numerical simulation of conjugated heat exchange in the turbulent motion of fluid in an oil well 03013

Michael Al’es, Sergey Makarov and Alexandr Karpov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903013

• Abstract
• PDF (294.3 KB)
• References

Open Access

Classification of pressure welding methods depending on thermal deformation conditions 03014

Vsevolod Bulychev, Rashit Latypov, Svetlana Golubina, Gyulnara Latypova and Artem Rodin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903014

• Abstract
• PDF (195.8 KB)
• References

Open Access

Determination of the parameters of typical multi-link dimensional chains (closing link is tension) using recurrent dependencies 03015

Sergey Shilyaev, Evgeniy Slashchev, Vladimir Osetrov, Igor Voyachek and Rinat Shaikhov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903015

• Abstract
• PDF (386.8 KB)
• References

Open Access

Rational reduction of work in progress when assembling parts of a product using the group interchangeability method 03016

Sergey Shilyaev, Evgeniy Slashchev, Igor Voyachek and Rinat Shaikhov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903016

• Abstract
• PDF (477.9 KB)
• References

Open Access

Method of clad bead height evaluation based on analysis of laser impact area images 03017

Darya Chkalova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903017

• Abstract
• PDF (546.8 KB)
• References

Open Access

Comparative analysis of software products for virtual simulation of electrical circuits 03018

Alexey Bashkirov, Vadim Glotov, Alexander Kostyukov, Alexander Antilikatorov and Yuri Balashov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903018

• Abstract
• PDF (167.6 KB)
• References

Open Access

Surface microgeometry treated with a precast textured grinding wheel 03019

Vladimir Gusev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903019

• Abstract
• PDF (415.5 KB)
• References

Open Access

Modeling the hardness of the titanium alloy subjected to laser processing 03020

Vladimir Gusev, Valentin Morozov and Dmitry Gavrilov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903020

• Abstract
• PDF (320.6 KB)
• References

Open Access

Probabilistic modeling of crack growth in large structures 03021

Yury Izvekov, Olga Torshina, Alexander Anisimov, Galina Kameneva and Tatyana Bondarenko

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903021

• Abstract
• PDF (218.7 KB)
• References

Open Access

The creation of objects of the Kazakh culture with the use of additive technologies 03022

Railya Mukhamadeyeva and Yerzhan Akinov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903022

• Abstract
• PDF (202.4 KB)
• References

Open Access

Enhancing technology of producing secure IoT devices on the base of remote attestation 03023

Vasily Desnitsky and Igor Kotenko

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903023

• Abstract
• PDF (204.6 KB)
• References

Open Access

Determination of the duration of deburring at vibro-abrasive treatment of parts in organic media 03024

Yelena Kolganova, Ivan Vyalikov, Anna Azarova, Roman Mishchenko and Georgiy Sanamyan

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903024

• Abstract
• PDF (441.3 KB)
• References

Open Access

The influence of parameters of friction stir welding modes on the mechanical properties of corrosion-resistant alloys with steel 03025

Radmir Rzaev, Vladimir Smirnov and Vladimir Smirnov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903025

• Abstract
• PDF (671.4 KB)
• References

Open Access

Approach to development of HMI screens for CNC with dynamic kinematics 03026

Georgi Martinov, Roman Pushkov, Liliya Martinova, Nikolai Kozak and Svetlana Evstafieva

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903026

• Abstract
• PDF (238.1 KB)
• References

Open Access

Assembly conditions for mechanical systems with gear elements 03027

Dmitry Kurasov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903027

• Abstract
• PDF (282.5 KB)
• References

Open Access

Advantages and disadvantages of morphological methods in engineering 03028

Dmitry Rakov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903028

• Abstract
• PDF (282.0 KB)
• References

Open Access

Experience in using anisotropic properties of composites in engineering the compressor impeller of a small-size gas turbine engine 03029

L. A. Martynyuk, L. V. Bykov, A. D. Ezhov, P. I. Talalaeva and D. V. Afanasiev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903029

• Abstract
• PDF (552.7 KB)
• References

Open Access

Finite difference approximation of eigenvibrations of a bar with oscillator 03030

D. M. Korosteleva, L. N. Koronova, K. O. Levinskaya and S. I. Solov’ev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903030

• Abstract
• PDF (238.7 KB)
• References

Open Access

Modeling of dynamic loadings on a tower crane jib 03031

Evgenij Kudryavtsev, Alexander Gavrilenko and Mostafa Jafari

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903031

• Abstract
• PDF (314.9 KB)
• References

Open Access

Sensor stability assurance problems and their relationship with the overall problems of providing system performance quality 03032

Petr Mikhailov and Zhomart Ualiyev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903032

• Abstract
• PDF (373.2 KB)
• References

Open Access

QFD methodology development 03033

Elena Loginova and Maria Ostapenko

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903033

• Abstract
• PDF (209.4 KB)
• References

Open Access

Neural network identification of a nonlinear model of a high-pressure sodium lamp 03034

Anatolij D. Semenov, Anton V. Volkov and Alena Yu. Shumkina

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903034

• Abstract
• PDF (259.5 KB)
• References

Open Access

The gas flow dynamics in a separator with coaxially arranged pipes 03035

Vadim E. Zinurov, Andrey V. Dmitriev, Guzel R. Badretdinova, Rustem Ya. Bikkulov and Ilnur N. Madyshev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903035

• Abstract
• PDF (355.8 KB)
• References

Open Access

International standards application in machine building 03036

Maria Ostapenko, Vladlena Nazarova and Natalia Voronova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903036

• Abstract
• PDF (320.7 KB)
• References

Open Access

Investigation magnetorheological elastomer elastic deformations under the influence of vibration and electromagnetic load 03037

Andrey Minaev, Juri Korovkin, Hammat Valiev, Gennady Stepanov and Dmitry Borin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903037

• Abstract
• PDF (353.2 KB)
• References

Open Access

Theory and design of an experimental intelligent plant for regulating plant productivity 03038

Dmitry Polenov and Alexey Belyi

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903038

• Abstract
• PDF (221.5 KB)
• References

Open Access

Technique for the development of technological assembly tooling at the stage of product design 03039

Mikhail Kovalevich, Elena Shemonaeva and Alexey Goncharov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903039

• Abstract
• PDF (466.5 KB)
• References

Open Access

Development of the combined chemical-mechanical approach to polymeric materials cutting 03040

Oleg Erenkov, Daniil Yavorskii and Alexander Protsenko

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903040

• Abstract
• PDF (231.9 KB)
• References

Open Access

Research the hardness of polymer materials after turning 03041

Oleg Erenkov and Elena Yavorskaya

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903041

• Abstract
• PDF (294.6 KB)
• References

Open Access

Multiobjective optimization in ERP system design 03042

Alexander Feofanov and Nikolay Baranov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903042

• Abstract
• PDF (124.1 KB)
• References

Open Access

Development of a data collection system for a CNC system using cloud FRED technology and OPC UA specification 03043

Ilya Kovalev, Ahed Issa, Petr Nikishechkin, Nadezda Chervonnova and Andrey Petrov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903043

• Abstract
• PDF (415.5 KB)
• References

Open Access

An approach to the development of logical control systems for technological equipment in the concept of Industry 4.0 03044

Ramil Nezhmetdinov, Ilya Kovalev, Nadezda Chervonnova, Ramilya Nezhmetdinova and Akram Al Khoury

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903044

• Abstract
• PDF (478.3 KB)
• References

Open Access

Dynamic vibration absorber for shaft machining 03045

Oleg Drachev, Igor Turbin, Irina Amirdzhanova, Tatyana Varentsova and Veronika Petrova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903045

• Abstract
• PDF (315.4 KB)
• References

Open Access

Causes of destruction of continuous welded rail tracks 03046

Svetlana Gertsyk and Natalya Volgina

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903046

• Abstract
• PDF (320.8 KB)
• References

Open Access

Modelling of layer-by-layer metal removal in the digital twin of the round grinding process performed on CNC machines 03047

Aleksandra Akintseva, Pavel Pereverzev, Alexander Prokhorov and Sergey Kononov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903047

• Abstract
• PDF (736.9 KB)
• References

Open Access

Strength criterion for unidirectional CFRP under off-axis loading 03048

Alexander Dumansky, Hao Liu and Mukhamiat Alimov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903048

• Abstract
• PDF (289.6 KB)
• References

Open Access

Study of the Rostov nuclear power plant efficiency operation under increased vacuum value 03049

Aleksey Babushkin, Sergey Skubienko and Ludmila Kinash

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903049

• Abstract
• PDF (427.2 KB)
• References

Open Access

Transfer of Cubic Boron Nitride Grinding Wheel Wear Products to the Nickel Alloy Surface 03050

Vladimir A. Nosenko, Aleksandr V. Fetisov and Semen P. Kuznesov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903050

• Abstract
• PDF (911.7 KB)
• References

Open Access

Influence of the tool’s feed on the thickness of burrs at the pipe end during stack cutting with a circular saw 03051

Olga A. Makarova, Alexey A. Zhdanov, Alla A. Kozhevnikova, Ruslan I. Arzhukhanov and Vu Van Giang

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903051

• Abstract
• PDF (223.9 KB)
• References

Open Access

Modeling and research of the process of preparing the surface of a part for thermal spray coating 03052

Aleksandr Novikov, Aleksei Rodishev, Andrei Gorin and Maria Tokmakova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903052

• Abstract
• PDF (426.3 KB)
• References

Open Access

Spatial reorientation of the carriage of a CNC lathe when reversing 03053

Alexander Denisenko

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903053

• Abstract
• PDF (364.7 KB)
• References

Open Access

Investigation of Uniformity of Allowance along Airfoil of GTE Turbine Blade 03054

R. A. Vdovin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903054

• Abstract
• PDF (200.1 KB)
• References

Open Access

Effects of forming agents on performance of highly-porous abrasive tools 03055

Yuri Bagaiskov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903055

• Abstract
• PDF (309.7 KB)
• References

Open Access

Optimization of the anode shape for the electroplating coating on long thin-walled detail taking into account the ohmic potential drop 03056

Inna Solovjeva, Denis Solovjev, Viktoriya Konkina and Yuri Litovka

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903056

• Abstract
• PDF (268.4 KB)
• References

Open Access

Calculation of temperature fields during finishing and strengthening electromechanical treatment of bodies of rotation moving along a helical line by a high-temperature source 03057

Alexander Morozov, Lilia Khabieva, Alexey Knyurov, Sergey Petryakov and Julia Nuretdinova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903057

• Abstract
• PDF (332.5 KB)
• References

Open Access

Application of vibration stabilizing treatment to improve the quality of aircraft parts 03058

M. A. Belozerov, V. A. Lebedev, N. S. Koval, V. V. Ivanov and S. I. Popov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903058

• Abstract
• PDF (158.9 KB)
• References

Open Access

Microplasma surfacing on turbine blades 03059

Rashit Latypov, Mikhail Silensky and Gulnara Latypova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903059

• Abstract
• PDF (431.1 KB)
• References

Open Access

Risk management in the organization of delivery of construction materials 03060

Irina Misanova, Dmitrij Tarasov, Anastasia Safronova, Alexey Astafiev and Ryszard Świekatowsky

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903060

• Abstract
• PDF (1.644 MB)
• References

Open Access

Modeling the interaction of resource flows in the foreign trade system 03061

Pyotr Kurenkov, Alexey Volodin, Anastasia Safronova, Diana Kakhrimanova and Jozef Majerčák

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903061

• Abstract
• PDF (550.6 KB)
• References

Open Access

The application of the elastic tube with the specific cross section form in the linear peristaltic pump 03062

Alexander Grishin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903062

• Abstract
• PDF (638.2 KB)
• References

Open Access

To the problem of computer-aided design of gear-and-leverage mechanisms 03063

Alexey Rivkin, Alexandr Sobolev, Alexey Nekrasov and Michael Arbuzov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903063

• Abstract
• PDF (439.7 KB)
• References

Open Access

Reducing of energy consumption for the object’s motion with designed optimum control 03064

Alexander Bokhonsky, Natalia Varminskaya and Aleksandr Ryzhkov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903064

• Abstract
• PDF (260.2 KB)
• References

Open Access

Channel Angular Pressing of the Annular Billets from Copper M4 03065

Afanasiy Ivanov and Semen Vaschenko

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903065

• Abstract
• PDF (367.9 KB)
• References

Open Access

Determining the exponent of the unloading curve when flattening a sphere 03066

Petr Ogar, Elena Ugryumova and Denis Gorokhov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903066

• Abstract
• PDF (582.5 KB)
• References

Open Access

Product layout electronic simulation application to power engineering products design practice based on NX-TeamCenter PLM System 03067

Valeriy Dotsenko, Mikhail Serbinovskiy, Anton Priymak, Denis Markelov and Alexandra Serbinovskaya

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903067

• Abstract
• PDF (270.4 KB)
• References

Open Access

The study of the FDM technology of 3D printing with the use of materials for production tooling 03068

Anastasia Koshkina, Alexander Fedorov, Alexander Morozov, Evgeny Karpukhin and Yulia Poletaeva

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903068

• Abstract
• PDF (724.8 KB)
• References

Open Access

Determination of burr thickness in high-speed cutting of pipe bundles with circular saws 03069

Olga A. Makarova, Alexey A. Zhdanov, Alla A. Kozhevnikova, Ruslan I. Arzhukhanov and Vu Van Giang

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903069

• Abstract
• PDF (273.0 KB)
• References

Open Access

Non-linear discrete model of BLDC motor for studying the range of permissible values of the voltage vector in the state space 03070

Sergei Trefilov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903070

• Abstract
• PDF (328.0 KB)
• References

Open Access

Digital twin of mechatronic drive based on the optimal control model of BLDC motor 03071

Sergei Trefilov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903071

• Abstract
• PDF (392.1 KB)
• References

Open Access

Direct image-based micro finite element modelling of bone tissue 03072

Oleg Gerasimov, Nikita Kharin, Viktoriya Yaikova, Evgeniy Statsenko and Tatyana Baltina

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903072

• Abstract
• PDF (769.8 KB)
• References

Open Access

Geometrical features of micro milling cutters for machining of medical components made of titanium alloys 03073

Alexander Isaev, Ramil Khamzin, Ilya Minin, Petr Pivkin and Marco Leonesio

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903073

• Abstract
• PDF (1.048 MB)
• References

Open Access

A discrete control algorithm synthesis for the live-steam-line heating system 03074

Dmitriy Akimenko, Alexandr Sizov, Fedor Chubarov, Aleksey Nikitin and Lusia del Sokorro

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903074

• Abstract
• PDF (550.2 KB)
• References

Open Access

PlantTwin simulation system as a tool for verifying production plans and supporting decision-making to improve the efficiency of machine-building industries 03075

Petr A. Nikishechkin, Sergey S. Ivashin, Vitaly E. Chernenko, Andrey A. Malykhanov and Nikita V. Dolgov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903075

• Abstract
• PDF (389.3 KB)
• References

Open Access

Evaluation of machining content and labor intensity of manufacturing products of new nomenclature when determining the cost of fulfilling an order at highly specialized machine-building enterprises 03076

Sergey N. Grigoriev, Vitaliy A. Dolgov, Pavel I. Umnov, Nikolay N . Fokin and Olga S. Proshkina

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903076

• Abstract
• PDF (282.2 KB)
• References

Open Access

Automatic processing and analysis of the structural properties of bone tissue 03077

Elena Semenova, Nikita Kharin, Pavel Bolshakov, Anastasiya Ivanova and Viktoriya Yaikova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903077

• Abstract
• PDF (358.9 KB)
• References

Open Access

Determination of aircraft hydraulic system pipeline leak cause 03078

Tatyana Osipok, Semyon Zaides and Hin Nguyen

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903078

• Abstract
• PDF (463.7 KB)
• References

Open Access

Calculation of light transistor structural parameters based on InGaN – AlGaN heterostructure 03079

Artem Bushuev, Artem Zolotov and Ruslan Chkalov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903079

• Abstract
• PDF (400.3 KB)
• References

Open Access

Study of change in 300 MW power unit efficiency operation under reduced loads 03080

Aleksey Malykov, Aleksey Babushkin, Kirill Naginaev, Ludmila Kinash and Artem Kalashnikov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903080

• Abstract
• PDF (540.6 KB)
• References

Open Access

Waste Co-Combustion with a Conventional Fossil Fuel on Power Plants 03081

Roman Bezuglov, Vladimir Papin, Evgeniy Dyakonov, Elena Veselovskaya and Vladimir Filimonov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903081

• Abstract
• PDF (158.7 KB)
• References

Open Access

The use of discrete mathematics algorithms in technological design 03082

Nina Glinskaya and Isabella Belonovskaya

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032903082

• Abstract
• PDF (266.2 KB)
• References

Open Access

Adhesion strength of protective and decorative coatings depending on the porosity of the cement substrate 04001

Valentina Loganina and Bassam Shareef Denied Al Saedi

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904001

• Abstract
• PDF (300.6 KB)
• References

Open Access

Modelling the behavior of fiber-reinforced concrete with low-modulus fibers under load 04002

Yury V. Pukharenko, Dmitrii A. Panteleev, Mikhail I. Zhavoronkov, Maxim P. Kostrikin and Said Mujtaba Eshanzada

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904002

• Abstract
• PDF (439.4 KB)
• References

Open Access

Formation of an optimal cement matrix for vibropress products 04003

Igor Romanenko, Alexey Fadin, Irina Petrovnina and Maria Romanenko

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904003

• Abstract
• PDF (193.0 KB)
• References

Open Access

Influence of moisture on the durability of protective and decorative coatings of external walls of buildings 04004

Valentina Loganina

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904004

• Abstract
• PDF (275.9 KB)
• References

Open Access

Carbonate fine- grained concrete with enhanced internal energy dissipation properties 04005

Vladimir Belov, Pavel Kuliaev and Temur Barkaya

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904005

• Abstract
• PDF (182.2 KB)
• References

Open Access

Influence of limestone flour on properties of expanded clay concrete 04006

Vladimir Belov and Pavel Kuliaev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904006

• Abstract
• PDF (163.2 KB)
• References

Open Access

Modification of the structure of gypsum-cement-pozzolanic binder 04007

Ekaterina Potapova, Aung Kyaw Nyein, Elena Tsvetkova and Hans-Betram Fischer

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904007

• Abstract
• PDF (1.732 MB)
• References

Open Access

The study of the hardening process Portland cement`s concrete with bio cementing additives 04008

Elena S. Dergunova, Valeria A. Goncharova, Alexey Y. Romanchukevich and Margarita A. Goncharova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904008

• Abstract
• PDF (221.1 KB)
• References

Open Access

Concrete rubble recycling in life cycle contract implementation 04009

Margarita A. Goncharova, Alexey E. Pankov, Hameed Ghalib Hussain Al-Surraiwyab and Elena S. Dergunova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904009

• Abstract
• PDF (375.6 KB)
• References

Open Access

Compressive strength of lightweight expanded polystyrene basalt fiber concrete 04010

Galina Okolnikova, Lina Abass Saad, Majeed M. Haidar and Fouad adnan noman Abdullah Al-shaibani

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904010

• Abstract
• PDF (425.4 KB)
• References

Open Access

Continual model and dynamic calculation of buildings under seismic impacts 04011

M. K. Usarov, G. T. Ayubov and D. M. Usarov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032904011

• Abstract
• PDF (457.5 KB)
• References

Open Access

Designing a Tracked Running Gear of a Radio-Controlled Harvester 05001

Vladislav Klubnichkin, Evgeny Klubnichkin, Maxim Yakovlev, Vladimir Makarov and Vladimir Belyakov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905001

• Abstract
• PDF (1.140 MB)
• References

Open Access

Creating a digital twin of an agricultural machine 05002

Kirill Nemtinov, Maria Eruslanova, Alexander Zazulya, Yulia Nemtinova and Haider Sabah Salih

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905002

• Abstract
• PDF (1.016 MB)
• References

Open Access

Research of algorithms for recognizing and determining the coordinates of apple fruits on the crown of a tree 05003

Igor G. Smirnov, Vladimir V. Krasnoborodko, Dmitry A. Syrovatsky and Artyom Yu. Spiridonov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905003

• Abstract
• PDF (535.9 KB)
• References

Open Access

Development and research of the cultivator frame design made of non-standard beams 05004

Viktor Telegin and Igor Telegin

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905004

• Abstract
• PDF (2.605 MB)
• References

Open Access

Assessment and forecast of technological requirement for flax harvesting machinery with conditional coefficients 05005

Aleksandr Lavrov, Maksim Moskovskiy, Andrey Boiko, Lyudmila Godunova and Hoang Ngia Dat

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905005

• Abstract
• PDF (270.7 KB)
• References

Open Access

Trends in the development of technical level of the specialized flax harvesting machinery 05006

Aleksandr Lavrov, Maksim Moskovskiy, Andrey Boiko, Elena Malaya and Hoang Ngia Dat

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905006

• Abstract
• PDF (173.2 KB)
• References

Open Access

Accurate ground scanning of the day surface of tilled soil to determine its agro-technical characteristics 05007

Sergey Vasiliev, Viktor Alekseev and Mikhail Vasiliev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905007

• Abstract
• PDF (598.2 KB)
• References

Open Access

Development of the module software for control technological processes of the gravitationally-pneumatic grain cleaner 05008

Stanislav Gerasimenko, Artak Adamyan, Maksim Moskovsky and Bui Quang Minh

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905008

• Abstract
• PDF (347.1 KB)
• References

Open Access

Cleaning of soybean seeds using the gravity-pneumatic cleaner in the line of production soybean 05009

Victor Khamyev, Anatoly Gulyev, Gaik Adamyan, Andrey Boiko and Bui Quang Minh

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905009

• Abstract
• PDF (303.0 KB)
• References

Open Access

Modeling the transfer of potassium monophosphate with irrigation water in drip irrigation and sprinkling 05010

Victor Alekseev, Rustam Aleksandrov, Sergey Vasiliev, Olga Kharitonova, Vladimir Philippov and V. V. Alekseev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905010

• Abstract
• PDF (298.5 KB)
• References

Open Access

Justification of the application type universal grain cleaning complex 05011

Aleksandr Golovkov, Victor Khamyev, Inna Knyazeva, Andrey Boiko and Valeriy Kelarev

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905011

• Abstract
• PDF (187.5 KB)
• References

Open Access

A biotechnological system of root crops preparation for farm animals 05012

Aleksey Brusenkov, Vasiliy Kapustin, Vladimir Nemtinov and Yulia Nemtinova

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905012

• Abstract
• PDF (337.0 KB)
• References

Open Access

To the question of the value of sharpening of the corners of working bodies of agricultural machines. Justification. Influence on the quality of work 05013

Sergey V. Belousov

Published online: 26 November 2020

DOI: https://doi.org/10.1051/matecconf/202032905013

• Abstract
• PDF (432.8 KB)
• References