| Issue |
MATEC Web Conf.
Volume 329, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2020)
|
|
|---|---|---|
| Article Number | 02042 | |
| Number of page(s) | 4 | |
| Section | Materials Science | |
| DOI | https://doi.org/10.1051/matecconf/202032902042 | |
| Published online | 26 November 2020 | |
X-ray spectral microanalysis of X13 steel powders obtained by electroerosive dispersion
1 Southwest state University, 305040, Kursk, Russian Federation
2 OSU named after I. S. Turgenev, 302026, Orel, Russian Federation
* Corresponding author : hardikov1990@mail.ru
Chromium is the most common alloying element. Chromium alloyed steel has increased strength, hardness, wear resistance, corrosion resistance in aggressive and oxidizing environments. The process of obtaining powder materials by the method of electroerosion dispersion favorably differs by the possibility of obtaining powders even from very hard and refractory materials. In the case of grinding material with this method, the only important criterion is the electrical conductivity of the material being ground. Worn parts and other scrap can be used as feedstock during the process. The purpose of the study is to investigate the powder, obtained from the waste of chromium-containing steels. Thanks to the study of the used powder samples on modern devices, results were obtained indicating that the chromium powder obtained by the method of electroerosive dispersion can be reused to restore and strengthen the machine parts.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.