Issue |
MATEC Web Conf.
Volume 329, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2020)
|
|
---|---|---|
Article Number | 03069 | |
Number of page(s) | 5 | |
Section | Mechanical Engineering | |
DOI | https://doi.org/10.1051/matecconf/202032903069 | |
Published online | 26 November 2020 |
Determination of burr thickness in high-speed cutting of pipe bundles with circular saws
1 Volgograd State Technical University, 400005, Volgograd, Lenin avenue, 28, Russia
* Corresponding author: kinnomans@mail.ru
The method of high-speed cutting of cold rolled steel with circular saws is one of the most common in modern mechanical engineering. But often, cutting cold rolled metal is accompanied by the formation of a burr at the ends of the blanks. This machining method is characterized by high productivity, significant tool wear and intense heating of the workpiece due to high cutting speeds. The thickness of this burr is directly dependent on the pipe material, the temperature in the cutting zone and the saw feed. The article proposes a mathematical relation to determine the thickness of the burr by these parameters.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.