MATEC Web Conf.
Volume 329, 2020International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2020)
|Number of page(s)||5|
|Published online||26 November 2020|
Investigation of Uniformity of Allowance along Airfoil of GTE Turbine Blade
Samara University, 34, Moskovskoe sh., Samara, 443086 Russia
* Corresponding author: firstname.lastname@example.org
This paper shows the results of a study of the uniformity of the allowance along the airfoil in the turbine blades workpieces. It is found that in the existing industry, there is a defect associated with a lack of allowance along the airfoil (from the blade back and pressure side) for the polishing operation in order to give the required cleanliness and roughness of the surface layer. By measuring the wall thickness of the blade airfoils, it is concluded that by mechanically modifying the technological bases on the blade, it is possible to select the optimal position of the workpiece in the template instrument, at which the allowance along the airfoil is relatively uniform, and the dimensions of the blade wall thickness will be within the specified tolerance.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.