MATEC Web Conf.
Volume 329, 2020International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2020)
|Number of page(s)||7|
|Published online||26 November 2020|
Development of a data collection system for a CNC system using cloud FRED technology and OPC UA specification
MSTU STANKIN, 127055 Vadkovskiy per. 3a, Moscow, Russia
* Corresponding author: email@example.com
Collecting data from process equipment is currently an interesting task. The use of complex SCADA systems is not always possible and is usually an expensive solution. For some tasks, in-depth analysis of the received technological information is not needed, but visualization of the necessary data is sufficient. In control systems, it is usually not possible to create custom HMI screens. The use of new approaches based on web technologies and cloud solutions allows collecting and visualizing data on web pages and screens of mobile devices. The article shows a solution for collecting data from a CNC system using the OPC UA protocol and subsequent data visualization based on the FRED cloud platform in the required format with the ability to configure HMI screens.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.