Open Access
MATEC Web Conf.
Volume 329, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2020)
Article Number 03024
Number of page(s) 7
Section Mechanical Engineering
Published online 26 November 2020
  1. Tamarkin, M.A., Smolentsev, E.V., Kolganova, Ye.N. Analiz sovremennogo sostojanija finishnykh metodov obrabotki v srede svobodnykh abrazivov i detalej, imejuschikh malyje pazy i otverstija (Small grooves and holes parts granular environment processing finishing methods present state analysis) // Vestnik Voronezhskogo gosudarstvennogo tekhnicheskogo universiteta (Voronezh State Technical University Bulletin) (2019). vol. 15. № 1. Pp. 122-129. [Google Scholar]
  2. Kolganova, E.N., Goncharov V.M., Fedorov A.V. (2019). Investigation of deburring process at vibro-abrasive treatment of parts having small grooves and holes. Materials today: Proceedings, 19 (5), 2368-2373. [Google Scholar]
  3. Antonova, N.M. Evaluation of adhesion strength of protective coatings with Al powder by adhesion work of initial suspension towards metal surface. //MATEC Web of Conferences. - 2018. - vol. 224: International Conference on Modern Trends in Manufacturing Technologies and Equipment (2018). - Article Number: 03011. [Google Scholar]
  4. Antonova, N.M., Zinovyev, I.A., Khaustova, Ye.Yu., Boldyrev, F.M., Lisnitchenko, I.A. Opredeleniye adgezii putyom tsifrovoj obrabotki izobrazhenij poverkhnosti pokrytij (Adhesion determining by means of coating surface images digital treatment) // Inzhenernyj Vestnik Dona (Don Engineering Bulletin).(2019). № 1. URL: [Google Scholar]
  5. Lebedev, V.А., Serga, G.V., Khandozhko, А.V. Increase of efficiency of finishing-cleaning and hardening processing of details based on rotor-screw technological systems IOP Conf. Series: Materials Science and Engineering 327 (2018) 042062 doi:10.1088/1757-899X/327/4/042062. [Google Scholar]
  6. Antonova, N.M., Shorkin, V.S., Romashin, S.N., Babichev, A.P. (2019). Adhesion of a Vibration Mechanochemical Solid-Lubricant MoS(2) Coating. Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques, 13 (5), 848-854 doi: 10.1134/S1027451019040025 [Google Scholar]
  7. N.M. Antonova, A.P. Babichev, V.S. Berezovski. (2017). Study of the Morphology and Structure of Porous Composites Obtained from Na–CMC Suspensions with Aluminum Micro-Particles and Boehmite Nanoparticles. Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques. - Vol. 11, No. 5. - p. 955-959 doi: 10.1134/S1027451017050032 [Google Scholar]
  8. S.U. Shtyn, V.A. Lebedev, A.O. Gorlenko Thermodynamic aspects of the coating formation through mechanochemical synthesis in vibration technology systems IOP Conf. Series: Materials Science and Engineering 177 (2017) 012127 doi:10.1088/1757-899X/177/1/012127. [Google Scholar]
  9. V.V. Ivanov, N.S. Dontsov, A.V. Kirichek, Technological features of metallic zinc coatings obtained during mechanochemical synthesis, implemented in conditions of vibro-wave technological systems. (2018), IOP Conference Series: Materials Science and Engineering [Google Scholar]
  10. V.V. Ivanov, A.P. Babichev, N.P. Pogorelov The research of technological characteristic of the vibrowave mechanical and chemical oxide coating formation. (2018), MATEC Web of Conferences [Google Scholar]
  11. V.A. Lebedev, A A Kochubey and A V Kiricheck The use of the rotating electromagnetic field for hardening treatment of details /IOP Conf. Series: Materials Science and Engineering 177 (2017) 012126 doi:10.1088/1757-899X/177/1/012126. [Google Scholar]
  12. V.A. Lebedev, A.V. Kirichek., V.D. Sokolov Energy State of a Plastically Deformed Surface Layer / Procedia Engineering 150 (2016) 775–781, International Conference on Industrial Engineering, ICIE 2016. [Google Scholar]
  13. I.A. Pinahin, V.A. Chernigovskii, A.A. Bratsikhin, М. А. Yagmurov, Kh.R. Sugarov Peculiar Properties of BK-8 Hard Alloy Wear after Volumetric Laser Pulsed Hardening under Production Conditions. Journal of Friction and Wear, (2017), Vol. 38, No. 2, pp. 86-91. [Google Scholar]
  14. I.A. Pinakhin, V.A. Chernigovskii, A.A. Bratsikhin, М. А. Yagmurov, Kh.R. Sugarov Investigation into Physicomechanical Properties of VK6, VK8, and T5K10 Hard Alloys after Volumetric Pulsed Laser Hardening. Inorganic Materials, (2018), vol. 54, No. 15, pp. 19-22. [Google Scholar]
  15. Gillespie L.K 1973 The formation and properties of machining burrs (Logan, Utah: Utah State University) [Google Scholar]
  16. Ivanov V.V, Popov S.I and Kirichek A.V (2017) Qualitative Characteristics of МоS2 SolidLubricant Coating Formed by Vibro-Wave Impact of Free-Moving Indenters J. Key Engineering Materials 736 18-22 [Google Scholar]
  17. Rouabhi Y., Lounis A and Babichev A.P (2016) Improving the performance of vibratory treatment based on polymeric composite binder J. New Technol. Mater. 06 38-43 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.