Analysis of the geometry and contact density of globoid gearing

Aleksandr Vyatkin

doi:10.1051/matecconf/202032903008

All issues

Volume 329 (2020)

MATEC Web Conf., 329 (2020) 03008

References

Open Access

Issue		MATEC Web Conf. Volume 329, 2020 International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2020)


Article Number		03008
Number of page(s)		8
Section		Mechanical Engineering
DOI		https://doi.org/10.1051/matecconf/202032903008
Published online		26 November 2020

P.S. Zak, Globoid Worm Gears (Mashgiz, Moscow, Russia, 1962) [Google Scholar]
N.I. Kolchin, Analytical calculation of planar and spatial links (Mashgiz, Moscow, Russia, 1949) [Google Scholar]
Y.I. Diker, L.I. Sagin, Basics of globoid worm gear production (Mashgiz, Moscow, Russia, 1960) [Google Scholar]
V.A. Shishkov, Influence of errors in assembling a worm pair on smoothness of gearing, Machines and tools, 10, pp. 23-25 (1959) [Google Scholar]
V.L. Zhuravlev, Technology of making globoid gears (Mechanical Engineering, Moscow, Russia, 1965) [Google Scholar]
V.A. Rubin, Synthesis and experimental study of modified globoid gears (dissertation of PhD in Engineering, Bryansk Institute of Transport Engineering, 1975) [Google Scholar]
L.I. Blaishmidt, L.I. Analytical study of the nature of contact in globoid gears (dissertation of PhD in Engineering, Leningrad Polytechnic Institute, 1967) [Google Scholar]
G.I. Sorkin, G.I. Development and investigation of globoid gear with decreased vibroactivity (dissertation of PhD in Engineering, Moscow Machine Tool Institute, 1970) [Google Scholar]
B.F. Fedotov, Investigation of the modified globoid gearing (dissertation of PhD in Engineering, Moscow Machine Tool Institute, 1966) [Google Scholar]
N.N. Fedorov, N.N. Theoretical and experimental research into contact conditions in modified globoid gears (dissertation of PhD in Engineering, Moscow Machine Tool Institute, 1970) [Google Scholar]
V.K. Akulich, Analytical geometry and kinematics of contact in globoid gearing with a ground worm and some issues of gearing modification (dissertation of PhD in Engineering, Leningrad Polytechnic Institute, 1969) [Google Scholar]
L.M. Golsfast, Analytical and experimental research in globoid gear with a ground worm (dissertation of PhD in Engineering, Leningrad Polytechnic Institute, 1971) [Google Scholar]
L.M. Golofast, M.L. Erichov, A.I. Smolin, A.I. Questions of geometry, theory and results of research in globoid gears with a worm being ground, In: Theory and geometry of spatial links, St. Petersburg, Russia, pp. 8-9 (1973) [Google Scholar]
M.S. Krivenko, Geometry of globoid and cylindrical worms processed with a disk tool, News of Universities: Mechanical Engineering Series, 4, pp.19-25 (1968) [Google Scholar]
N.N. Krylov, N.A. Chvanova, B.L. Salamander, Synthesis of globoid gears whose worm is cut by a disk tool, In: Theory and geometry of spatial links, St. Petersburg, Russia, p. 20 (1973) [Google Scholar]
A.I. Smolin, A.I. Research in globoid gear with a worm being ground with a conical cup circle (dissertation of PhD in Engineering, Novocherkassk Polytechnic Institute, 1972) [Google Scholar]
V.N. Syzrantsev, Synthesis of gearing of cylindrical transmissions with localized contact (dissertation of PhD in Engineering, Kurgan Engineering Institute, 1989. (in Russian) [Google Scholar]
V. Syzrantsev, K. Syzrantseva, M. Milanovic, A. Pazyak, Determination of Geometrical Parameters for Semi-Rolling Bevel Precessional Gears with Straight Teeth”, IOP Conference Series: Materials Science and Engineering, 142(1), Paper Number 123667 (2016) https://doi.org/10.1088/1757-899X/142/1/012086 [Google Scholar]
A.V. Bondarenko, A.I. Smolin, A.I. Vyatkin, Research into static loading of globoid gearing, In: Improving the methods of calculation, design and production technology of spiroid, hypoid and worm gears and gearboxes, Izhevsk, Russia, p.55 (1986) [Google Scholar]
A.V. Bondarenko, A.V. Static loading of globoid gearing with an account of peculiarities of geometry generation, fabrication errors, installation and compliance of the gear elements, (dissertation of PhD in Engineering, Kurgan Engineering Institute, 1987) [Google Scholar]
Karthikeyan Marambedu, Microgeometry modifications for load distribution improvement and transmission error reduction of loaded straight bevel gears, In: International conference on gears, Munich, Germany, pp. 1309-1320 (2010) [Google Scholar]
Wei-Liang Chen, Chung-Biau Tsay, Mathematical model and tooth surfaces of recess action worm gears with double-depth teeth, Mechanism and Machine Theory, 46, pp.1840–1853 (2011) https://doi.org/10.1016/j.mechmachtheory.2011.07.015 [Google Scholar]
I.C. Boantǎ, V. Boloç, The Mathematical Model of Generating Kinematic for the Worm Face Gear with Modified Geometry, Procedia technology, 12, pp. 442-447 (2014) https://doi.org/10.1016/j.protcy.2013.12.512 [Google Scholar]
L. Dudás, Modelling and simulation of a new worm gear drive having point-like contact, Engineering with Computers, 29, pp.251–272 (2013) https://doi.org/10.1007/s00366-012-0271-0 [Google Scholar]
A.I. Vyatkin, Development and analysis of computational and evolutionary model of globoid gearing depreciation, (dissertation of PhD in Engineering, Kurgan Engineering Institute, 1997) [Google Scholar]
A.I. Vyatkin, General approach to calculating depreciation of globoid transmission, International Research Journal, 1(55), pp. 48-50 (2017) https://doi.org/10.23670/IRJ.2017.55.123. [Google Scholar]
A.I. Vyatkin, Development of globoid transmission geometric model with regard to depreciation, International Research Journal, 1(55), pp. 51-53 (2017) https://doi.org/10.23670/IRJ.2017.55.106. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] P.S. Zak, Globoid Worm Gears (Mashgiz, Moscow, Russia, 1962) [Google Scholar]

[2] N.I. Kolchin, Analytical calculation of planar and spatial links (Mashgiz, Moscow, Russia, 1949) [Google Scholar]

[3] Y.I. Diker, L.I. Sagin, Basics of globoid worm gear production (Mashgiz, Moscow, Russia, 1960) [Google Scholar]

[4] V.A. Shishkov, Influence of errors in assembling a worm pair on smoothness of gearing, Machines and tools, 10, pp. 23-25 (1959) [Google Scholar]

[5] V.L. Zhuravlev, Technology of making globoid gears (Mechanical Engineering, Moscow, Russia, 1965) [Google Scholar]

[6] V.A. Rubin, Synthesis and experimental study of modified globoid gears (dissertation of PhD in Engineering, Bryansk Institute of Transport Engineering, 1975) [Google Scholar]

[7] L.I. Blaishmidt, L.I. Analytical study of the nature of contact in globoid gears (dissertation of PhD in Engineering, Leningrad Polytechnic Institute, 1967) [Google Scholar]

[8] G.I. Sorkin, G.I. Development and investigation of globoid gear with decreased vibroactivity (dissertation of PhD in Engineering, Moscow Machine Tool Institute, 1970) [Google Scholar]

[9] B.F. Fedotov, Investigation of the modified globoid gearing (dissertation of PhD in Engineering, Moscow Machine Tool Institute, 1966) [Google Scholar]

[10] N.N. Fedorov, N.N. Theoretical and experimental research into contact conditions in modified globoid gears (dissertation of PhD in Engineering, Moscow Machine Tool Institute, 1970) [Google Scholar]

[11] V.K. Akulich, Analytical geometry and kinematics of contact in globoid gearing with a ground worm and some issues of gearing modification (dissertation of PhD in Engineering, Leningrad Polytechnic Institute, 1969) [Google Scholar]

[12] L.M. Golsfast, Analytical and experimental research in globoid gear with a ground worm (dissertation of PhD in Engineering, Leningrad Polytechnic Institute, 1971) [Google Scholar]

[13] L.M. Golofast, M.L. Erichov, A.I. Smolin, A.I. Questions of geometry, theory and results of research in globoid gears with a worm being ground, In: Theory and geometry of spatial links, St. Petersburg, Russia, pp. 8-9 (1973) [Google Scholar]

[14] M.S. Krivenko, Geometry of globoid and cylindrical worms processed with a disk tool, News of Universities: Mechanical Engineering Series, 4, pp.19-25 (1968) [Google Scholar]

[15] N.N. Krylov, N.A. Chvanova, B.L. Salamander, Synthesis of globoid gears whose worm is cut by a disk tool, In: Theory and geometry of spatial links, St. Petersburg, Russia, p. 20 (1973) [Google Scholar]

[16] A.I. Smolin, A.I. Research in globoid gear with a worm being ground with a conical cup circle (dissertation of PhD in Engineering, Novocherkassk Polytechnic Institute, 1972) [Google Scholar]

[17] V.N. Syzrantsev, Synthesis of gearing of cylindrical transmissions with localized contact (dissertation of PhD in Engineering, Kurgan Engineering Institute, 1989. (in Russian) [Google Scholar]

[18] V. Syzrantsev, K. Syzrantseva, M. Milanovic, A. Pazyak, Determination of Geometrical Parameters for Semi-Rolling Bevel Precessional Gears with Straight Teeth”, IOP Conference Series: Materials Science and Engineering, 142(1), Paper Number 123667 (2016) https://doi.org/10.1088/1757-899X/142/1/012086 [Google Scholar]

[19] A.V. Bondarenko, A.I. Smolin, A.I. Vyatkin, Research into static loading of globoid gearing, In: Improving the methods of calculation, design and production technology of spiroid, hypoid and worm gears and gearboxes, Izhevsk, Russia, p.55 (1986) [Google Scholar]

[20] A.V. Bondarenko, A.V. Static loading of globoid gearing with an account of peculiarities of geometry generation, fabrication errors, installation and compliance of the gear elements, (dissertation of PhD in Engineering, Kurgan Engineering Institute, 1987) [Google Scholar]

[21] Karthikeyan Marambedu, Microgeometry modifications for load distribution improvement and transmission error reduction of loaded straight bevel gears, In: International conference on gears, Munich, Germany, pp. 1309-1320 (2010) [Google Scholar]

[22] Wei-Liang Chen, Chung-Biau Tsay, Mathematical model and tooth surfaces of recess action worm gears with double-depth teeth, Mechanism and Machine Theory, 46, pp.1840–1853 (2011) https://doi.org/10.1016/j.mechmachtheory.2011.07.015 [Google Scholar]

[23] I.C. Boantǎ, V. Boloç, The Mathematical Model of Generating Kinematic for the Worm Face Gear with Modified Geometry, Procedia technology, 12, pp. 442-447 (2014) https://doi.org/10.1016/j.protcy.2013.12.512 [Google Scholar]

[24] L. Dudás, Modelling and simulation of a new worm gear drive having point-like contact, Engineering with Computers, 29, pp.251–272 (2013) https://doi.org/10.1007/s00366-012-0271-0 [Google Scholar]

[25] A.I. Vyatkin, Development and analysis of computational and evolutionary model of globoid gearing depreciation, (dissertation of PhD in Engineering, Kurgan Engineering Institute, 1997) [Google Scholar]

[26] A.I. Vyatkin, General approach to calculating depreciation of globoid transmission, International Research Journal, 1(55), pp. 48-50 (2017) https://doi.org/10.23670/IRJ.2017.55.123. [Google Scholar]

[27] A.I. Vyatkin, Development of globoid transmission geometric model with regard to depreciation, International Research Journal, 1(55), pp. 51-53 (2017) https://doi.org/10.23670/IRJ.2017.55.106. [Google Scholar]