Issue |
MATEC Web Conf.
Volume 329, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2020)
|
|
---|---|---|
Article Number | 03001 | |
Number of page(s) | 8 | |
Section | Mechanical Engineering | |
DOI | https://doi.org/10.1051/matecconf/202032903001 | |
Published online | 26 November 2020 |
Providing adaptive properties of the drive of a rotary drilling machine
1 Don state technical university (branch) in Shakhty Shakhty, Russia
2 Lugansk National University named after Vladimir Dahl, Ukraine
* Corresponding author:lem-mikhailr@ ya.ru
The article is devoted to the issue of automatic adjustment of the drilling machine to operating modes close to optimal. Information about the method of automatic control of the rotational drilling process is provided. The essence of the method consists in a special design of the drive, in which the work of the hydraulic motor and the hydraulic cylinder are connected through the working process. As a result of this connection of hydraulic elements, the torque of rotation on the hydraulic motor controls the feed of the hydraulic cylinder. Tuning throttles provide adjustment of modes to the required range of drilling conditions. Depending on the strength of the rock being drilled and the operating conditions of the drilling machine, the drive automatically changes the feed rate, thus ensuring maximum productivity. Several variations of this adaptive drive of the drilling machine are described. A description of the authors development, the drive scheme, and a description of the principle of operation is given. The advantages of the adaptive drive and its disadvantages are shown.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.