Open Access
Issue
MATEC Web Conf.
Volume 329, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2020)
Article Number 02009
Number of page(s) 7
Section Materials Science
DOI https://doi.org/10.1051/matecconf/202032902009
Published online 26 November 2020
  1. A.A. Vorob’ev, Matematicheskoe modelirovanie parametrov kontakta kolesa s rel’som dlya razlichnyh uslovij ekspluatacii vagonov, Vestnik Instituta problem estestvennyh monopolij, v. 1 (33), pp. 34-41 (2016) [Google Scholar]
  2. A.F. Bogdanov, A.M. Budyukin, I.A. Ivanov, D.A. ZHukov, S.V. Urushev, Uluchshenie svojstv metalla oboda kolesnyh par tyagovogo po-dvizhnogo sostava, Byulleten’ rezul’tatov nauchnyh issledovanij, v. 1 (10), pp. 22-30 (2014) [Google Scholar]
  3. A.F. Bogdanov, A.M. Budyukin, S.I. Gubenko, I.A. Ivanov, S.V. Urushev, Izmeneniya v poverhnosti oboda i resurs koles pri ekspluatacii, Konstrukcionno-tekhnologicheskoe obespechenie nadezhnosti koles rel’sovyh ekipazhej, pp. 23-40 (2009) [Google Scholar]
  4. D.P. Kononov, Povyshenie nadyozhnosti cel’nokatanyh koles, monografiya, 250 p. (2018) [Google Scholar]
  5. A.A. Vorob’ev, A.M. Budyukin, V.G. Kondratenko, K.A. Merochnik, Modelirovanie dinamiki podvizhnogo sostava, Novye materialy i tekhnologii v mashinostroenii, v. 21, pp. 24-30 (2015) [Google Scholar]
  6. A.F. Bogdanov, S.I. Gubenko, D.A. ZHukov, I.A. Ivanov, Poverhnostnyj sloj i ekspluatacionnye svojstva oboda cel’nokatanogo kolesa, Konstrukcionno-tekhnologicheskoe obespechenie nadezhnosti koles rel’sovyh ekipazhej, p. 15-23 (2009) [Google Scholar]
  7. M.YA. Gal’perin, Harakteristiki vynoslivosti metallov na dvuh stadiyah ustalostnogo razrusheniya i razlichnyh bazah ispytanij, Problemy prochnosti, v. 5, pp. 23-35 (1978) [Google Scholar]
  8. M.E. Goff, O.YU. Kramarenko, Rol’ nizkih napryazhenij spektra v razvitii ustalostnogo razrusheniya, Prochnost’ materialov i konstrukcij, pp. 55-56 (1975) [Google Scholar]
  9. C.W. Lung, Z.Q. Mu, Phus. // Rev. B., Vol. 38, №16, pp. 11781-11784 (1988) [Google Scholar]
  10. G.E. Herst, Dolgosrochnaya vmestimost’ vodohranilishch, Trudy Amerikanskogo obshchestva grazhdanskih inzhenerov, v. 116, pp. 770-808 (1951) [Google Scholar]
  11. G.V. Vstovskij, A.G. Kolmakov, I.ZH. Bunin, Vvedenie v mul’tifraktal’nuyu parametrizaciyu struktur materialov, 115 p. (2001) [Google Scholar]
  12. G.V. Vstovskij, A.A. SHanyavskij, M.A. Artamonov, A.G. Kolmakov Mul’tifraktal’naya selekciya struktur aviacionnyh titanovyh diskov kompressorov, izgotovlennyh po standartnoj tekhnologii, pri razlichnom soprotivlenii ustalostnomu razrusheniyu, II Matem. model. v sinerg. sistemah, pp. 259-261 (1999) [Google Scholar]
  13. Z.Q. Mu, C.W. Lung, Theor. and Appl. Fract. Mech., v. 17, pp. 157-161 (1992) [CrossRef] [Google Scholar]
  14. O.N. Romaniv, Vyazkost’ razrusheniya konstrukcionnyh stalej, Metallurgiya (1979) [Google Scholar]
  15. A.YU. Ishlinskij, Ejlerovo opisanie deformirovaniya odnoj izotropnoj sredy, Prikladnye zadachi mekhaniki. Kn. 1. Mekhanika vyazkouprugih i ne vpolne uprugih tel, pp. 333-336 (1986) [Google Scholar]
  16. M.A. Artamonov, Matematicheskoe modelirovanie fraktal’no-kineticheskih processov ustalostnogo razrusheniya aviacionnyh splavov s modificirovannymi poverhnostnymi sloyami, Avtoreferat diss. na soiskanie uchenoj stepeni kandidata fiziko-matematicheskih nauk, - 18 p. (2006) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.