| Issue |
MATEC Web Conf.
Volume 329, 2020
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2020)
|
|
|---|---|---|
| Article Number | 05004 | |
| Number of page(s) | 7 | |
| Section | Agricultural Engineering | |
| DOI | https://doi.org/10.1051/matecconf/202032905004 | |
| Published online | 26 November 2020 | |
Development and research of the cultivator frame design made of non-standard beams
Lipetsk State Technical University, Lipetsk, Russia
* Corresponding author: vv.telegin@yandex.ru
The paper presents the results of the development and study of the strength of the cultivator frame made of non-standard beams. The term “non-standard beam” refers to a off-sized beam welded from steel strips. As such stripes, both standard hot-rolled strips and strips cut from standard cold-rolled or hot-rolled sheets can be used. The main advantage of the proposed frame design is the relatively low cost and availability of materials for its manufacture, as well as the potential to minimize the weight of the finished product by changing the thickness and dimensions of the strips used. Frame design and calculations were performed by the Autodesk Inventor Professional environment.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.