All issues

Volume 100 (2017)

Free Access to the whole issue

MATEC Web of Conferences

Volume 100 (2017)

13^th Global Congress on Manufacturing and Management (GCMM 2016)

Zhengzhou, China, November 28-30, 2016
L. Zhao, A. Xavior, J. Cai and L. You (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 08 March 2017

PDF (71.2 KB)

About GCMM 2016

Part 1: Automotive and Aerospace manufacturing

Open Access

Extending Driving Vision Based on Image Mosaic Technique 01001

Deng Chen, Yanduo Zhang, Wei Wei, Xiaolin Li, Huabing Zhou, Rui Zhu, Tao Lu, Xun Li, Haijiao Xu and Li Peng

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001001

Open Access

Parameters Designing of Slide Mode Variable Structure Controller of Bus Voltage of DC Microgrid Based on Proportion Switching Function 01002

Zhenchuan Sun, Jiasheng Zhang and Zhen Guo

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001002

Open Access

Analysis on Dynamic Transmission Accuracy for RV Reducer 01003

Fengshou Zhang, Pengfei Li, Peng Zhu, Xingxing Yang and Wenhe Jiang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001003

Open Access

Analysis of Wheel Hub Motor Drive Application in Electric Vehicles 01004

Yuechao Sun, Man Li and Cong Liao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001004

Open Access

A Fully Automatic Fresh Apple Juicer: Peeling, Coring, Slicing and Juicing 01005

Fuwen Hu, Li Li, Yancheng Liu and Tadeusz Mikolajczyk

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001005

Open Access

A Survey of Vehicle Routing Problem 01006

Wujun Cao and Wenshui Yang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001006

Open Access

Numerical Investigation of the Leakage and Rotordynamic Characteristic for a Short Staggered Labyrinth Seal 01007

Minglei Zhong

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001007

Open Access

Problems and Countermeasures of Aviation Industry Development in Henan Province 01008

Shaoxia Zhao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001008

Open Access

Research on high-end manufacturing and aviation economy development of Henan Province 01009

Yongming Zhu, Youcun Shi and Minge Jia

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001009

Open Access

The Exploration on the Development Mode of Airport Industry 01010

Yongming Zhu and Hao Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001010

Open Access

Questions and Countermeasures on Developing General Aviation Industry in China 01011

Yongming Zhu and Yongchao Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001011

Open Access

Residual Deformation Control Design for Car Handbrake Operating Arm Assembly 01012

Yuan Li and Li Ma

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001012

Open Access

The Research on Sensor Optimal Layout on Detection Device for Automobile Seat Horizontal Drive Mechanism 01013

Hongxian Ye and shixi Yang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001013

Open Access

An Identification Method of Main Harmonic Current Indicator Based On Active Power Direction Method 01014

Junyi Zhao, Chaoying Yang, Zhiwei Xue and Lin Yuan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001014

Open Access

Study on Determination Method of Load Measurement Sample Length of the Loader Working Device 01015

Yipin Wan, Jie Jia and Xuding Song

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001015

Open Access

Topology Optimization in Electric Car Body Frame Based on Optistruct 01016

Dongdong Ge, Liangrong Zhu and Dongji Xuan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001016

Open Access

Optimization Design Of Setback Generator For Initiating Explosive Devices 01017

Qiao Lu, Liming Li and Guofu Yin

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710001017

Part 2: Internet +, Big data and Flexible manufacturing

Open Access

Oil metal particles Detection Algorithm Based on Wavelet Transform 02001

Wei Shang, Yanshan Wang, Meiju Zhang and Defeng Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002001

Open Access

Optimal Design of Hydraulic Fracturing for Deep Volcanic Reservoir in Zhungeer Basin 02002

Hao Cheng, Bo Huang, Shijie Han and Yanming Fu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002002

Open Access

Fracturing Fluid Leak-off for Deep Volcanic Rock in Zhungeer Basin: Mechanism and Control Method 02003

Bo Huang, Hao Cheng, Yidong He and Yanming Fu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002003

Open Access

Research on CO₂ Quality Pipeline Transportation Based on Yanchang Oilfield CCUS 02004

Yongchao Yang, Hongsheng Tao, Jinghua Yang, Qinghua Shang and Shuangge Cao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002004

Open Access

Study on the Water in Lignite by DSC 02005

You Li, Shouyu Zhang, Menghao Zhao, Qing Mao, Yunlong Yao and Jingning Yang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002005

Open Access

The Mobile Application Social Mode of Manufacturing Enterprise under the Environment of Mobile Internet 02006

Cen Zuo, Xumei Zhang and Xingshan Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002006

Open Access

Management strategies of Bring Your Own Device 02007

Peixuan Li and Liang Yang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002007

Open Access

Synchronization Time Division Multiplexing Bus Communication Method Using Serial Communication Interface 02008

Xi Liu, Ruihai Dai and Bifu Qian

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002008

Open Access

Under the Background of “Internet +” the Social Anomie and Governance Plan in Chinese Modernization Process 02009

Yundong Jiang and Feng Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002009

Open Access

Study on Operational Availability Relational Model of RMS 02010

Kai Cao, Zheng Huang and Xiaowei Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002010

Open Access

A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development 02011

Xie Tong and Wu Lei

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002011

Open Access

Factor Analysis of Enterprise Internet+ Impetus Based on System Dynamics 02012

Haiwang Cao, Chaogai Xue and Xinfeng Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002012

Open Access

A Large Group Decision Making Approach Based on TOPSIS Framework with Unknown Weights Information 02013

Yupeng Li, Xiaozhen Lian, Cheng Lu and Zhaotong Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002013

Open Access

Design of Flow Big Data System Based on Smart Pipeline Theory 02014

Jianqing Zhang, Shuai Li and Lilan Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002014

Open Access

Research on the Impact of Big Data on Logistics 02015

Yaxing Wang, Lijie Feng, Heyu Chang and Min Wu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002015

Open Access

Research of self-power Generation Scheduling Model Base on Multi-objective in Iron and Steel Enterprises 02016

Xin Geng, Honghai Niu, Jun Chen and Bing Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002016

Open Access

Man-hour Estimation Model based on Standard Operation Unit for Flexible Manufacturing System 02017

Zhenggeng Ye, Jiachao Cui and Fuli Zhou

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002017

Open Access

Study on the Value Creation of New B2B Platform —— Based On the Case of GongChang.com 02018

Qian Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002018

Open Access

Influence of Big Data on Manufacturing Industry and Strategies of Enterprises: A Literature Review 02019

Zhao Zhao and Yifan Yang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002019

Open Access

Design and Implementation of Mobile Blended Learning Model Based on WeChat Public Platform 02020

Yanyan Han, Liyue Tian and Weijun Cheng

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002020

Open Access

Research on Evaluation of Regional Logistics Capability under Big Data Background 02021

Wenfeng Zhao and Jiapeng Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002021

Open Access

The Transport Performance of Feedback Coupled Brownian Ratchets 02022

LiMing Fan, MingTao Lv, RenZhong Huang and TianFu Gao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002022

Open Access

Selecting Visualization Alternative Based on Uncertain Theory 02023

Ping Huang, Zhiying Lv and Liwei Zheng

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002023

Open Access

Design and Implementation of Online Booking System of University Sports Venues 02024

Can Li, Junjie Li, Hongxiang Cao and Zhan Meng

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002024

Open Access

Optimization of Multiple Traveling Salesman Problem Based on Simulated Annealing Genetic Algorithm 02025

Mingji Xu, Sheng Li and Jian Guo

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002025

Open Access

Logistics Distribution Center Location Optimizatio Model An Example Study 02026

Lingling Li and Jiapeng Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002026

Open Access

A Study on the Training of Logistics Management Talents in Colleges in the Big Data Age --Taking Luoyang area as an Example 02027

Sijia Li and Wenfeng Zhao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002027

Open Access

Intelligent Management System of Power Network Information Collection Under Big Data Storage 02028

Yingying Qin, Hua Xuan and Bailin Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002028

Open Access

Forecasting Analysis of Shanghai Stock Index Based on ARIMA Model 02029

Chenggang Li, Bing Yang and Min Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002029

Open Access

The Research on Influencing Factors of Medical Logistics Cost Based on ISM Model 02030

Yunkai Zhai and Yingchao Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002030

Open Access

The Discussion about International Agricultural Logistics and Distribution System of Henan Wanbang 02031

Shumin Luo and Hua Xuan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002031

Open Access

The Third Party Logistics Partner Selection of B2C E-Commerce Enterprise 02032

Wei Xu and Bing Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002032

Open Access

A New Stochastic Geometry Model of Coexistence of Wireless Body Sensor Networks 02033

Ming Yang, Ruixia Liu, Yinglong Wang, Minglei Shu and Yuanyuan Yang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002033

Open Access

Internet of Things: Application and Prospect 02034

Ran Liu and Jinfeng Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002034

Open Access

Applying TPM on Production Line of Huanwei 02035

Yunkai Zhai and Jing Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002035

Open Access

O2O - Based Agricultural Products Supply Chain Process Integration Optimization Based on Internet + 02036

Huijuan Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002036

Open Access

The New Information Grey Direct Model and Its Use in The Forecasting of Energy Constitutes 02037

Baohua Yang and Jinshuai Zhao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002037

Open Access

New Construction of Fire Fighting Academies Under the View of Information Construction 02038

Bin Ni

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002038

Open Access

Improved PCA Method Based on RBF Neural Network for Multiple Response Parameters Optimization 02039

Jianli Yu, Xiaotian Pan and Hongqi Huang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002039

Open Access

Research on the Development of E-commerce Model of Agricultural Products 02040

Yaping Huo and Huiping Mu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002040

Open Access

A Knowledge Modeling Method for Computer Graphics Design & Production Based on Ontology 02041

Tong Chen, Beibei Fan, Dongping Chen and Cong Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002041

Open Access

Study on the Transformation and Upgrade of E-Commerce Application in Manufacturing Industry 02042

Liang Zhao and Mengzhao Feng

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002042

Open Access

An Optimizing Research about the Cloud Service Resource Based on the Requirements of the Users 02043

Yanfang Kang, Dapeng Li, Xuyang Li and Mingna Guo

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002043

Open Access

Application of text mining in library book procurement 02044

Ding Cong

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002044

Open Access

The Online Bookstore 02045

Yunkai Zhai and Wei Lu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002045

Open Access

A Research on Development of Construction Industrialization Based on BIM Technology under the Background of Industry 4.0 02046

Junjie Li and Hui Yang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002046

Open Access

Flexible job-shop scheduling based on genetic algorithm and simulation validation 02047

Erming Zhou, Jin Zhu and Ling Deng

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002047

Open Access

A Big Data Decision-making Mechanism for Food Supply Chain 02048

Guojun Ji and KimHua Tan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002048

Open Access

Study on Effects of Incentive Factors on supply chain Performance in E-commerce Environment 02049

Huiping Mu and Guopeng Yu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002049

Open Access

Research on Multiple Particle Swarm Algorithm Based on Analysis of Scientific Materials 02050

Hongwei Zhao, Jingjing Zhao and Abashe caleb tokan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002050

Open Access

Laos Organization Name Using Cascaded Model Based on SVM and CRF 02051

Shaopeng Duan, Lanjiang Zhou and Feng Zhou

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002051

Open Access

Chinese-Lao Bilingual Named Entity Alignment Research 02052

Rui Han, Lanjiang Zhou, Feng Zhou and Jinpeng Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002052

Open Access

Method of Word Segmentation in Laos Based on Maximal Matching of Syllables 02053

Wenjie Huo, Lanjiang Zhou, Feng Zhou and Bei Yang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002053

Open Access

The Distribution of Words in Chinese and Laos Based on Cross Language Corpus 02054

Yuquan Huang, Lanjiang Zhou, Feng Zhou and Jinpeng Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002054

Open Access

Chinese and Thai Bilingual Topic Detection Online 02055

Ziqiang Rang, Lanjiang Zhou, Jinpeng Zhang, Yantuan Xian and Zhengtao Yu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002055

Open Access

Investigate the Computer Information Network Security Technology and the Development Direction 02056

Teng Ping

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002056

Open Access

A Generalized Mathematical Model for the Fracture Problem of the Suspended Highway 02057

Ying Zhao and Ming Lu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002057

Open Access

Application of Maintenance Simulate System of NC Machine Tools in Teaching 02058

Xin He, Guosheng Xu, Ping He, Jiming Tan, Lifang Zhang and Huili Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002058

Open Access

Event Relation Recognition by Multi Part of Speech Association Distribution Characteristics 02059

Chao Han, Feng Zhou, Lanjiang Zhou and Xin Yan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002059

Open Access

Analysis and Application of River Surface Line in Hilly Area based on Hec-ras Model 02060

Congshan Yang, Ming Lu and Guifeng Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002060

Open Access

An Evaluation of Mobile with the Hierarchical Approach 02061

Yi Cao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002061

Open Access

Fire Situations and Prevention Measures of residential building 02062

Baixia Zhou

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002062

Open Access

Software Sub-system in Loading Automatic Test System for the Measurement of Power Line Filters 02063

Bo Yu, Lin Fu and Adam Barker

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002063

Open Access

A Model of Trusted Connection Architecture 02064

Xun Zhang, Zhihao Wang, Yong Zhi and Hui Yuan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002064

Open Access

The Empirical Analysis of Liaoning Equipment Manufacturing Industry Competitiveness 02065

Lingyan Meng and Shijiang Xu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002065

Open Access

Analysis on Current Situation and Countermeasure of Domestic Electronic Commerce Logistics in the Internet Age——Based on Resource Dependence Theory 02066

Jiapeng Zhang and Sijia Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710002066

Part 3: Manufacturing innovation and Advanced manufacturing technology

Open Access

Fatigue Analysis of Large-scale Wind turbine 03001

Yongli Zhu and David Lawson

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003001

Open Access

Researched on Initiation Synchronization of Addressable Initiation System 03002

Guofu Yin, Liming Li and Qiao Lu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003002

Open Access

Design of Bus Protocol Intelligent Initiation System Based On RS485 03003

Liming Li, Qiao Lu and Guofu Yin

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003003

Open Access

Optimized Method for Knee Displacement Measurement in Vehicle Sled Crash Test 03004

Hang Sun, Lei Lou, Zhixin Liu, Shicheng Li, Chao Chen and Xing Pan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003004

Open Access

Dynamic Characteristics of the Steam Accumulator Charging and Discharging 03005

Peizhi Yang, Xia Hu and Gang Liao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003005

Open Access

Degradation of 4-methylbenzylidene camphor (4-MBC) Using Fenton, UV Light Irradiation and Photo-Fenton 03006

Chunmei Ji, Chen Wang, Jing Sun and Yadong Yu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003006

Open Access

The Design and Implementation of the Remote Centralized-Monitoring System of Well-Control Equipment Based on RFID Technique 03007

Bin Luo, Jiarui Liu, Junlan Li and Haibo Liang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003007

Open Access

Under the Background of “New Normal”, Research on Constructing the Productive and Technical Preparation System Based on Lean Thinking for Locomotives -Take M Company as an Example 03008

Ming Ma and Tao Lu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003008

Open Access

The Rigid-flexible Coupling Dynamics Analysis of the Powder Filling Quantity Control Mechanism Based on the ADAMS 03009

Guihe Wang, Liu Ying, Na Cui, Yiqi Wang and Yijing Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003009

Open Access

Detection for Power line Inspection 03010

Bing Han and Xiaoyu Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003010

Open Access

Study on Measurement of Advanced Manufacturing: Case by China 03011

Jinghuai She and Xuedan Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003011

Open Access

Research on the Influence Factors of Product Design in Complex Product Systems 03012

Xiuhong Wang and Jing Suo

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003012

Open Access

Study on the Application of 6σ Method in Shoemaking Enterprise Quality Improvement 03013

Ting Wang, Pengfei Ren and Xin Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003013

Open Access

Research on the Innovation Elements In the Process of Technology Innovation 03014

Yangguang Li, Junju Yue and Min Wu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003014

Open Access

Research on De-icing Robot and Its Motion Characteristics Overhead Transmission Line 03015

Zhuo Wang, Ming-zhi Cai, Tao Wang and Bo Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003015

Open Access

Creative Industries Development and Efficiency in China 03016

Wentao Yu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003016

Open Access

Research on Constructing a Model of Collaborative Innovation System for Equipment Manufacturing Industry 03017

Baoyu Jia, Xiaonan Chen, Zhaoji Yu and Chuang Wei

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003017

Open Access

The Internet of Things Technology Development and Application -- Zhengzhou Airport as An Example 03018

Songlin Hu and Bing Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003018

Open Access

The Development of Low Carbon Manufacturing Industry in Hainan Province 03019

Xi Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003019

Open Access

Achievements of Theoretical Research on Chinese Technological Innovation 03020

Hanxi Wang, Chengna Wan, Zude Zhou and Shuhua Hu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003020

Open Access

The Development Direction of Research on Chinese Technological Innovation 03021

Hanxi Wang, Chengna Wan, Zude Zhou and Shuhua Hu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003021

Open Access

The Application of Industry 4.0 in Customized Furniture Manufacturing Industry 03022

Lin Wang, Jinfeng He and Songjie Xu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003022

Open Access

The Evaluation Index System of Innovation-Driven Capability of Chinese Manufacturing Industry Based on Factor Analysis 03023

Chuhao Zhao, Shanling Liao and Jinfa Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003023

Open Access

Design and optimization of the large span dry-coal-shed latticed shell in Liyuan of Henan province 03024

Wenfeng Du, Chunyu Liu, Yun Sun and Qi Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003024

Open Access

Design of Power Cable UAV Intelligent Patrol System Based on Adaptive Kalman Filter Fuzzy PID Control 03025

Siyu Chen and Wei Chen

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003025

Open Access

Building and Application of Cardiopulmonary Bypass Model in Rats 03026

Kun Zhang, Rui Xue and Shuwei Shen

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003026

Open Access

Ultrafiltration Technology and Its Application in Cardiopulmonary Bypass 03027

Kun Zhang, Lishen Wang and Shuwei Shen

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003027

Open Access

Research on Error Compensation Technology for CNC Machining 03028

Xianfeng Chen and Weiming Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003028

Open Access

Review of Cement Concrete Pavement of Noise Reduction Method 03029

Hongliang Tao, Chen Chen, Ping Jiang and Shuaihong Huang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003029

Open Access

A Novel Assessment Method of Charging Station Planning Based on Fuzzy Matter Element Theory 03030

Junyi Zhao, Chaoying Yang, Zhiwei Xue and Yangyang Tan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003030

Open Access

The PLC-based Industrial Temperature Control System: Design and Implementation 03031

Fanjie Wei

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003031

Open Access

Influences of three-dimensional printing to product innovation design thinking 03032

Ling Liu, Xu Wang and Ping Guo

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003032

Open Access

Real-time Solution via Dynamic Simulation for the Six Degree of Freedom Platform 03033

Lizong Lin, Xiao Li, Xiaopeng Ni and Gang Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003033

Open Access

Intelligent Adjustment of Printhead Driving Waveform Parameters for 3D Electronic Printing 03034

Na Lin, Shikai Jing, Hanning Chen and Wenxin Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003034

Open Access

FEM-based Printhead Intelligent Adjusting Method for Printing Conduct Material 03035

Xiaodan Liang, Na Lin, Hanning Chen and Wenxin Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003035

Open Access

An Ultraviolet-Visible (UV) Photometry System Based on the PDMS-based Microfluidic Chip 03036

Changhua Xiang, Ning Yang, Rongbiao Zhang, Jianjiang Guo and Hu Huang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003036

Open Access

Electrokinetically Control Flow Mixing in Microfluidic Chip Utilizing Microelectrode Based on Indium Tin Oxide 03037

Tianyuan Lv, Ning Yang, Zhiyu Zuo, Jianjiang Guo and Hu Huang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003037

Open Access

Study on the Temporal and Spatial Effect of the Relief Pressure of Upper Protective Layer Mining 03038

Chengcheng Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710003038

Part 4: Equipment manufacturing and New materials

Open Access

A research of heat transfer enhancement of rectangular channel with dimples 04001

Zhe Fu, Yingping Qian, Xizhi Zhou, Zhihong Yan and Yang Jiao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004001

Open Access

Study on Performance of Silicon Ignitiors based on Energetic Chip of Porous Silicon 04002

Lan Liu, Yan Xue, Ruizhen Xie, Xiaoming Ren and Kewei Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004002

Open Access

Study on Thermal Conversion of the Waste Oil Absorbin Activated Carbon 04003

Qing Mao, Shouyu Zhang, Menghao Zhao, Yunlong Yao, You Li and Jingning Yang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004003

Open Access

Design of A Regional perimeter Optical fiber Security and Protection System 04004

Guofan Chen and ShuangXin Wu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004004

Open Access

Development of A Maintenance Device for Bus-bar PT Voltage Air Switch 04005

Xiang Zhang, Ying Chen, Gaoxiang Lin and Bifu Qian

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004005

Open Access

Two Types of New Natural Materials for Fruit Vinegar in Prunus Plants 04006

Han Zhao, Xiaoxing Zhou, Ying Luo, Yanli Huang, Tana Wuyun, Fangdong Li and Gaopu Zhu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004006

Open Access

The Influence of Chemical Composition on LNG Pool Vaporization 04007

Zhidong Yu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004007

Open Access

Study on Dynamic Reconfiguration of Distribution Network Considering Distribution Generation 04008

Xin Geng, Honghai Niu, Jun Chen and Bing Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004008

Open Access

Research on Friction and Wear Performance of TiB₂ Based Self-lubricating Ceramic composites 04009

Huagang Ding

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004009

Open Access

Study on Graphene Reinforced Copper Contact Material 04010

Ruikun Song

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004010

Open Access

Research of Multi-axis NC Machining Method of Cylindrical Cam Based on UG NX 04011

Qianhua Liang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004011

Open Access

Study on the Load Sharing Capability of Closed-loop Gear Transmission in Braiding Machine 04012

Xianqing Lei, Qi Meng and Wensuo Ma

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004012

Open Access

The Influence of Social Capital on Small Micro-manufacturing Venture in China 04013

Shaoxia Zhao and Yongming Zhu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004013

Open Access

Study on Stress Analysis and Welding Deformation of the Loader Boom 04014

Zhengwen Yuan, Xi Lu, Yongneng Lu, Lei Xu and Shumin Zhu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004014

Open Access

An optimum method for latticed shells based on concept of the compression line 04015

Liming Zhu, Qi Liu, Peinan Gao, Yingyun Ma, Bingyang Guo and Wenfeng Du

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004015

Open Access

Dynamical failure index of single layer Keiwitt latticed shell structures 04016

Liming Zhu, Yun Sun, Wenfeng Du and Zengguang Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004016

Open Access

Quantitative Expression of Outlet Deviation Angle of Turbomachine Stator Based on Equivalent Moment of Momentum Principle 04017

Wenjia Li, Anlin Wang, Wei Cheng, Xiaotian Li and Jibin Han

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004017

Open Access

Determination of Picogram Levels of Diacerein in a Pharmaceutical Formulation by Flow-Injection Chemiluminescence 04018

Suya Gao, Binghong Ma, Pengfei Ma, Yun Zhang, Kaidi Huang and Chen Huang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004018

Open Access

Heparin Coating Technology in Cardiopulmonary Bypass 04019

Kun Zhang, Rui Xue and Shuwei Shen

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004019

Open Access

Clinical Application of Ophthalmic Implant Materials and Biocompatibility 04020

Feng Ke and Ying Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004020

Open Access

Experiment on the Influence Factors of Steam Distillation Rate of Crude Oil in Porous Media 04021

Guoqing Tian, Wenzhuang Xu, Hangjuan Huang, Zhiti Xie, Junzhou Huo and Yongsheng Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004021

Open Access

Clinical Observation after Multifocal Intraocular Lens Implantation 04022

Ying Wang and Feng Ke

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004022

Open Access

A Model of Trusted Measurement Model 04023

Zhili Ma, Zhihao Wang, Liang Dai and Xiaoqin Zhu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004023

Open Access

Numerical simulation of the fluid dynamics within the tissue engineering scaffolds micro-tubes 04024

Jingzhi Jiang, Yuyao Jia, Haiting Cui, Peiying Peng and Qinggang Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004024

Open Access

Model-based Adjustment of Droplet Characteristic for 3D Electronic Printing 04025

Na Lin, Shikai Jing, Hanning Chen and Wenxin Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004025

Open Access

Intelligent Image Segment for Material Composition Detection 04026

Xiaodan Liang, Na Lin, Hanning Chen and Wenxin Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004026

Open Access

Effect of Pt Concentration on the Grain Growth of TiO2sol-gel Films 04027

Y.J. Jia, Na. An, H.N. Chen and Yi Chen

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004027

Open Access

Preparing Methods and Its Influencing Factors about Nanoparticles Based on Dendritic Polymer 04028

Jianwei Zhang and Jeff Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004028

Open Access

Status and Prospect of Application about the New Materials Graphene 04029

Jianwei Zhang and Jeff Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004029

Open Access

The Enrichment and Transfer of Heavy Metals for Two Ferns in Pb-Zn Tailing 04030

Jiajie Mai, Qihe Yang, Yingfei Zhang, Xianlu Zeng, Yanmei Zhong and Deliang Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004030

Open Access

Fast Tomography Imaging System for Material Surface Based on Doublet-cylinder-lens in Intelligent OCT 04031

Shijun Xu and Xiaoling Ren

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004031

Open Access

Protective Material of the Security Mechanism Friction Surface on the Ship Lift 04032

Han Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004032

Open Access

Graphene and Carbon Nanotubes Synergistically Improved the Thermal Conductivity of Phenolic Resin 04033

Han Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004033

Open Access

Mechanical properties and experimental researches of new CSIPs sandwich panels 04034

Wenfeng Du, Xue Yang, Liming Zhu and Yun Sun

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004034

Open Access

Relationship on the Relational Benefit Effect of Oil Products on Customer Satisfaction 04035

Muxue Jing and Xilai Jin

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004035

Open Access

Relationship on the Price Sensitivity and Actual Market Acceptance Degree of Metallic Materials 04036

Muxue Jing and Xilai Jin

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004036

Open Access

Research on the Optimization Coupling for Enhancing Polymer Optical Fiber Communication 04037

Zhengqin Dong and Yun Lu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004037

Open Access

Effect on Communication System of Dispersive Multiplexing in Optical Fiber 04038

Zhengqin Dong and Yun Lu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004038

Open Access

Relationship between Oxidation of Metal Surface Layer and Air Quality in Wuhan 04039

Yiwen Wang and Venda Garilli

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004039

Open Access

Research on Corrosion Effects on Materials in Air Pollution Condition 04040

Yiwen Wang and Venda Garilli

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004040

Open Access

Relationship between Oxidation of Metal Surface Layer and Air Quality in Wuhan 04041

Mengmeng Hou and West Gabllian

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004041

Open Access

Research on the Price Features of Oil Stochastic Model Based on the Continuous Jump Model 04042

Mengmeng Hou and West Gabllian

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004042

Open Access

Exploration of Application Oriented Talent Training Mode of Material Science in Colleges and Universities 04043

Fang Wei

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004043

Open Access

An Empirical Study on the Reform of Talent Cultivation Mode of Material Science in University Based on PBL 04044

Fang Wei

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004044

Open Access

Research on Communication Resource Management System based on Metamaterials 04045

Zhou Rong

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710004045

Part 5: Management Engineering

Open Access

Application and research on business intelligence in audit business 05001

Lei Che, Xiaoping Yang and Fan Jiang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005001

Open Access

Research on the water environment capacity of Qingyi River (Xuchang Section) with GIS technology 05002

Li Wang, Luji Yu, Chunxiao Liu, Nan Sun and Minquan Feng

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005002

Open Access

Studies on Construction Technical System of Ecological Irrigation District in the Lower Yellow River Basin 05003

Shuang Zhang and Guibin Pang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005003

Open Access

Relationship between Venture Capital and Enterprises’ Performance of GEM Listed Companies 05004

Jianguo Wang, Jun Wu and Guomin Ji

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005004

Open Access

Incentive Mechanisms for Tacit Knowledge-Sharing in Master-Apprentice Pattern Based on The Principal-Agent Theory 05005

Ruihua Wang and Yongbo Lv

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005005

Open Access

The Governance Mechanism of Knowledge Sharing Hostility within E-business Enterprise 05006

Liang Zhao, Shuhui Fan and Ruihua Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005006

Open Access

Product Image to Build the Core Competitiveness of Enterprises 05007

Yan Shi and Laura Hjaltaso

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005007

Open Access

Top-Level Design and Practical Applications of Wisdom Campus in Chinese University—A Case of Wisdom Beihang 05008

Qingshan Xu, Jianhua Zhang, Lihua Yang and Liu Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005008

Open Access

The Integrated Design for Micro - environment Monitoring System of Showcase in Museum 05009

Chan Dong, Yang Zhang, Jingjie Li and Hui Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005009

Open Access

Colorimetric Temperature Measurement Method Considering Influence of Ambient Temperature 05010

Bin Zheng and Guoqing Ding

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005010

Open Access

Collaborative Innovation Research on High-tech Industry in the Center Delta 05011

Jingdong Yan, Li Li and Xiangmiao Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005011

Open Access

The Mental Health Condition of Manufacturing Front-line Workers: The Interrelationship of Personal Resources, Professional Tasks and Mental Health 05012

Qian Zhang, Zhanwu Zhang and Mingbo Sun

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005012

Open Access

A Gas Scheduling Optimization Model for Steel Enterprises 05013

Honghai Niu, Xin Geng and Jun Chen

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005013

Open Access

Discussion on Manufacturing and Services Integration Based on E-Commerce Platform 05014

Jinfa Li and Guangcheng Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005014

Open Access

Construction and Empirical Analysis of Innovation Index System of Zhengzhou-Luoyang-Xinxiang Self-dependent Innovation Demonstration Area 05015

Meng Zhan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005015

Open Access

Research on Tacit Knowledge Acquisition Based on Gray Theory and RBF Neural Network 05016

Xiaomin Guo, Zhiwei Zhou, Yamin Zhao, Mengmeng Zhang, Zhikang Lian, Lin Wei and Jianhua Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005016

Open Access

A Price Index Model for Road Freight Transportation and Its Empirical analysis in China 05017

Zhishuo Liu, Kuan Zhao, Jingmiao Ma and Chunfang Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005017

Open Access

Analysis on Causes and Countermeasures of Bullwhip Effect 05018

Jianhua Dai, Shibiao Li and Shengbo Peng

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005018

Open Access

Exploring the Mediating Effect of E-social Capital Between Community Members Interaction and Consumer Engagement 05019

Bingsheng Yan, Lihua Li and Hongtao Sun

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005019

Open Access

The Study on the Key Elements in Strategic HRM: from Strategy to Organizational Performance 05020

Yunlan He

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005020

Open Access

Market Analysis of Soundproof and Noise Reduction Plate 05021

Heyu Chang and Yaxing Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005021

Open Access

The Construction of Early-warning Index System in Regional Circular Economy of China 05022

Yanqing Kang and Rui Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005022

Open Access

The optimization of Three-echelon Agricultural Supply Chain under Crop Revenue Insurance 05023

Juncao Wu and Qiyuan Shi

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005023

Open Access

Study on Customer Experience Dimension Based on Online Shopping reviews of MI’s Products 05024

Lin Wang, Huijie Tang, Dong Liu and Caiyan Xing

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005024

Open Access

The Impact of Brand Awareness and Customer Experience on the Brand Loyalty of MI 05025

Yang Zhao, Tong Tong, Guanchu Li, Shuang Ma and Lin Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005025

Open Access

Financial Development, Government R&D Subsidies and Green Innovation 05026

Shuying Wang, Bobo Li and Shuijuan Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005026

Open Access

The Relationship between Institutional Environment and Enterprise’s Technology Innovation Performance——The Visual Angle Based on MOA Theoretical Model 05027

Shuying Wang and Xingye Xiao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005027

Open Access

Risk Assessment of Engineering Project Financing Based on PPP Model 05028

Qiuli Ma and Mingbo Sun

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005028

Open Access

Weight Calculation for Cases Generated by Tacit Knowledge Explicit Based on RS-FAHP 05029

Yue Cao, Zengmao Guo and Jianhua Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005029

Open Access

Study on the Coupling Development between Urbanization and Ecosystem-- The Comparative Analysis Based on Guizhou, Yunnan, Hunan and Zhejiang Province 05030

Lingyun Luo, Chenggang Li, Jue Hu, Bing Yang and Kang Pan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005030

Open Access

The Technological Input-output Efficiency of High-technology Enterprises in China Based on the DEA method 05031

Jing Lu, Guozhu Jia, Hengshan Zong and Wei He

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005031

Open Access

Does Financial Development Necessarily Lead to Economic Growth? Evidence from China’s Cities, 2007–2014 05032

Shiyong Zhao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005032

Open Access

Study on Co-branding Strategy- Dongfeng Yueda Kia as Example 05033

Jinrong Yu, Ying Song, Yin Lu and Dong Qi

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005033

Open Access

Research in the Agglomeration Level of Textile Industry in Yangtze River Delta Region of China 05034

Hao Zhou and Jiaona Wan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005034

Open Access

Management Practice of Supply Chain Quality Management in Service-oriented Manufacturing Industry 05035

Ping Gu, Ruyi Song and Xuyun Chen

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005035

Open Access

Research on Supply Chain Coordination of Fresh Agricultural Products under Agricultural Insurance 05036

Pei Zhang, Zhifei Chen and Wujun Cao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005036

Open Access

Research on Fiscal Expenditure and Tourism Development of Huangshan City: Based on Grey Relational Analysis 05037

Wenhao Wu and Huibin Zhan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005037

Open Access

The Mechanism of Knowledge Associated Integration of Interdisciplinary Research Team Based on Absorption Ability 05038

Ziqi Jin, Bowen Zhong, Xiaohong Wang and Hua Jiang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005038

Open Access

Analysis and Countermeasures of PPP Project Implementation Difficulties 05039

Yifeng Xu and Wei Chang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005039

Open Access

Study on the Coordination of Supply Chain Based on Carbon Emissions Trading Considering the Retailers’ Competition 05040

Daoping Wang, Xiaoyan Li and Kun Ding

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005040

Open Access

Analyzing The Value Drivers and Path Selection of Grid Corporations From the View of The Long-term Value 05041

Ruobing Shuai and Yuanbin Jiang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005041

Open Access

A Study of Female Board Directors Correlation With the Board Decision - Making Efficiency-- Based on Automobile Manufacturing Industry Listed Companies’ Empirical Evidence 05042

Dandan Dong and Aimin Li

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005042

Open Access

The Study on Activation Strategy of Time-honored Brand 05043

Jiankang Mu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005043

Open Access

Study on Behavior Value Analysis and Decision Methodology of Grid Corporations in China 05044

Yuanbin Jiang and Ruobing Shuai

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005044

Open Access

The Distribution Strategies of Convenience Stores Chain in China from Japan 7-11 05045

Ting Huang and Chunxiong Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005045

Open Access

The Measurement of Urbanization Level Based on Entity Space: A Case Study of JingJinJi Region, China 05046

Fenghua Wen and Lirong Ren

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005046

Open Access

Comprehensive Transportation Logistics Network Level Layout Based on Principal Component Factor and Cluster Analysis 05047

Jingrong Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005047

Open Access

Strategy for Developing Cold Chain Logistics in Zhengzhou Air Harbor Comprehensive Economic Experimentation Zone Based on PEST Analysis 05048

Jing Feng and Chunxiong Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005048

Open Access

The Evolution Process on Information Technology Outsourcing Relationship 05049

Weihua Duan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005049

Open Access

The Effect Analysis of Perceived - expected Organizational Support Consistency on Employee Performance 05050

Hongwei Wu and Yahui Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005050

Open Access

Thoughts on The Marketing Mode of Le TV & Super TV 05051

Aimin Li and Jiajia Han

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005051

Open Access

Research and Some Operation Suggestions on the Relationship Between Project and Sub-Project in R & D Project 05052

Wei Tang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005052

Open Access

Current Situation and Developing Countermeasures of Postgraduate Innovation Center in China 05053

Can Li, Sujuan Liu, Yuzhou Chen and Hongxiang Cao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005053

Open Access

Study on Village Cadres’ Working Enthusiasm on Voluntary Provision of Village-level Public Goods: Take “One Case, One Meeting” System as an Example 05054

Xiuyi Li, Weiping Liu and Xiaoyan Xing

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005054

Open Access

Zhengzhou Distribution Research and Countermeasures 05055

Wujun Cao and Lulu Wan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005055

Open Access

Sports dance artistic expression culture analysis 05056

Zegang Chen

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005056

Open Access

Role of CEO Age in Determining Executive-employee Pay Gap in Chinese Listed Manufacturing Companies: A Perspective of Risk Aversion 05057

Changzheng Zhang, Qian Guo and Lili Hu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005057

Open Access

The Advantages of BIM Application in EPC Mode 05058

Hongbo Qin

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005058

Open Access

Study on the Withdrawal Way of Silk Road Fund under the Belt and Road Initiative Based on Game Theory Model 05059

Yingying Qu and Shuying Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005059

Open Access

Risk Evaluation in Auto Spare Parts Transport Based on the AHP Method 05060

Rong Zeng and Chang Xu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005060

Open Access

Protection of Reservoir Water Quality Combining with Rocky Desertification Present Situation 05061

Weirui Chu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005061

Open Access

Study on the Present Situation and Cause of Formation of Rocky Desertification in Xichuan County 05062

Sensen Li, Hongwei Du and Weirui Chu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005062

Open Access

Fragmented Production in East Asia: What are Their Implications for the Sino-U.S. Trade 05063

Feiting Lin

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005063

Open Access

Research on the application of VRP theory in logistics transportation 05064

Ruiqi Zhu and Yunkai Zhai

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005064

Open Access

Analysis of Collaborative Relationship among Regional Medical Service Collaboration Based on Game Theory 05065

Yan Qiao and Yunkai Zhai

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005065

Open Access

Research on the development strategy of Pingdingshan iron and steel industry cluster with Wugang Company as the core 05066

Shuai Wang and Hongxiang Cao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005066

Open Access

A Three-dimensional Analysis Model and Application about Energy Conservation & Emissions Reduction Technology System and Synergistic effect of an Energy Intensive Product 05067

Jiliang Zheng and Qingqing Gu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005067

Open Access

A Security Architecture Research Based on Roles 05068

Linbo Tao, Jianjing Shen, Bo Liu and Zhenyu Zhou

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005068

Open Access

Zhengdong New District Smart Government Application System Construction and Its Development Strategy Research 05069

Bing Li, Xianghua Xing, Hua Xuan and Xueyuan Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005069

Open Access

An Efficiency of Resource Allocation Research Based on DEA Within 30 Ethnic Minority Autonomous Prefectures 05070

Jianzhong Zhang and Qiusheng Lu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005070

Open Access

Equilibrium contract strategies under asymmetric product substitutability 05071

Baixun Li and Yaru Nan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005071

Open Access

City, Urban Planning and the Creation of Urban Culture—Taking the Ancient City of Xi’an as an Example 05072

Yiqing Qiao

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005072

Open Access

Consumer Credit Card Use Intention and Influence Factors Analysis 05073

Yantao Wang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005073

Open Access

Discussion on the Relevant Factors of General Surgery Incision Infection and Prevention Methods 05074

Baotao Jin, Changsheng Lv and Hu Kai

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005074

Open Access

A Comparative Study on New Media Marketing in Domestic and Foreign Public Libraries 05075

Yan Xu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005075

Open Access

Exploration on the Ways of Thinking for Government by Law in the Governance of the Grassroots Society 05076

Xuzhi Fan

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005076

Open Access

Environmental Regulation, Industrial Heterogeneity and Value Compensation 05077

Lisha Chen and Changqing Ding

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005077

Open Access

Research on the Mechanism of Cross Organizational Knowledge Sharing in BIM Competitive Environment 05078

Wei Zhong, Liping Li, Jin Xu and Xiaoyu Ma

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005078

Open Access

Risk Management of Assets Dependency Based on Copulas Function 05079

Lei Cheng and Xiaofang Chen

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005079

Open Access

Study on the Coupling Coordination Degree between Metropolitan Economic System and Water Environmental System - Taking Beijing as an Example 05080

Ming Chen and Changxin Xu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005080

Open Access

A Discussion about American Mathematics Education from an Administrative Perspective 05081

Tao Wang and Miaomiao Yang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005081

Open Access

Hot Charging and Transporting to Continuous Discussion on Casting Slab at Tanggang 05082

Jun Dai

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005082

Open Access

Application of Fuzzy Borda Combination Evaluation in Subjective and Objective Evaluation Methods in Comprehensive Evaluation of Population Development 05083

Jiajia Yu, Hongqi Ma and Yuqi Han

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005083

Open Access

The Intervention Effect Assessment on Social Support Condition of the First Settlers in Dan jiangkou Reservoir Area, China 05084

Jinfeng Sun, Baoqing Shi, Jianxiang Shi, Xinpei Yue, Liang Sun and Qingfeng Tian

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005084

Open Access

Talking about Problems and Countermeasures of Small-sized Apartments Design 05085

Wenye Gong, Tianwei Bai and Donglin He

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005085

Open Access

Experiment Study on Elastic Indicator of Thermal Shock Ceramic Materials——Implementation of Students’ Innovative Research Project of Shandong University of Science and Technology 05086

Yanxia Wang, Tiantian Sun, Yongli Bao, Xiaomin Ma and Zhendong Liu

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005086

Open Access

Research on the Relationship between Economic Growth and Environmental Technologies in China 05087

Haibo Zhang

Published online: 08 March 2017

DOI: https://doi.org/10.1051/matecconf/201710005087

MATEC Web of Conferences

Volume 100 (2017)

13th Global Congress on Manufacturing and Management (GCMM 2016)

Statement of Peer review

About GCMM 2016

Part 1: Automotive and Aerospace manufacturing

Extending Driving Vision Based on Image Mosaic Technique 01001

Parameters Designing of Slide Mode Variable Structure Controller of Bus Voltage of DC Microgrid Based on Proportion Switching Function 01002

Analysis on Dynamic Transmission Accuracy for RV Reducer 01003

Analysis of Wheel Hub Motor Drive Application in Electric Vehicles 01004

A Fully Automatic Fresh Apple Juicer: Peeling, Coring, Slicing and Juicing 01005

A Survey of Vehicle Routing Problem 01006

Numerical Investigation of the Leakage and Rotordynamic Characteristic for a Short Staggered Labyrinth Seal 01007

Problems and Countermeasures of Aviation Industry Development in Henan Province 01008

Research on high-end manufacturing and aviation economy development of Henan Province 01009

The Exploration on the Development Mode of Airport Industry 01010

Questions and Countermeasures on Developing General Aviation Industry in China 01011

Residual Deformation Control Design for Car Handbrake Operating Arm Assembly 01012

The Research on Sensor Optimal Layout on Detection Device for Automobile Seat Horizontal Drive Mechanism 01013

An Identification Method of Main Harmonic Current Indicator Based On Active Power Direction Method 01014

Study on Determination Method of Load Measurement Sample Length of the Loader Working Device 01015

Topology Optimization in Electric Car Body Frame Based on Optistruct 01016

Optimization Design Of Setback Generator For Initiating Explosive Devices 01017

Part 2: Internet +, Big data and Flexible manufacturing

Oil metal particles Detection Algorithm Based on Wavelet Transform 02001

Optimal Design of Hydraulic Fracturing for Deep Volcanic Reservoir in Zhungeer Basin 02002

Fracturing Fluid Leak-off for Deep Volcanic Rock in Zhungeer Basin: Mechanism and Control Method 02003

Research on CO2 Quality Pipeline Transportation Based on Yanchang Oilfield CCUS 02004

Study on the Water in Lignite by DSC 02005

The Mobile Application Social Mode of Manufacturing Enterprise under the Environment of Mobile Internet 02006

Management strategies of Bring Your Own Device 02007

Synchronization Time Division Multiplexing Bus Communication Method Using Serial Communication Interface 02008

Under the Background of “Internet +” the Social Anomie and Governance Plan in Chinese Modernization Process 02009

Study on Operational Availability Relational Model of RMS 02010

A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development 02011

Factor Analysis of Enterprise Internet+ Impetus Based on System Dynamics 02012

A Large Group Decision Making Approach Based on TOPSIS Framework with Unknown Weights Information 02013

Design of Flow Big Data System Based on Smart Pipeline Theory 02014

Research on the Impact of Big Data on Logistics 02015

Research of self-power Generation Scheduling Model Base on Multi-objective in Iron and Steel Enterprises 02016

Man-hour Estimation Model based on Standard Operation Unit for Flexible Manufacturing System 02017

Study on the Value Creation of New B2B Platform —— Based On the Case of GongChang.com 02018

Influence of Big Data on Manufacturing Industry and Strategies of Enterprises: A Literature Review 02019

Design and Implementation of Mobile Blended Learning Model Based on WeChat Public Platform 02020

Research on Evaluation of Regional Logistics Capability under Big Data Background 02021

The Transport Performance of Feedback Coupled Brownian Ratchets 02022

Selecting Visualization Alternative Based on Uncertain Theory 02023

Design and Implementation of Online Booking System of University Sports Venues 02024

Optimization of Multiple Traveling Salesman Problem Based on Simulated Annealing Genetic Algorithm 02025

Logistics Distribution Center Location Optimizatio Model An Example Study 02026

A Study on the Training of Logistics Management Talents in Colleges in the Big Data Age --Taking Luoyang area as an Example 02027

Intelligent Management System of Power Network Information Collection Under Big Data Storage 02028

Forecasting Analysis of Shanghai Stock Index Based on ARIMA Model 02029

The Research on Influencing Factors of Medical Logistics Cost Based on ISM Model 02030

The Discussion about International Agricultural Logistics and Distribution System of Henan Wanbang 02031

The Third Party Logistics Partner Selection of B2C E-Commerce Enterprise 02032

A New Stochastic Geometry Model of Coexistence of Wireless Body Sensor Networks 02033

Internet of Things: Application and Prospect 02034

Applying TPM on Production Line of Huanwei 02035

O2O - Based Agricultural Products Supply Chain Process Integration Optimization Based on Internet + 02036

The New Information Grey Direct Model and Its Use in The Forecasting of Energy Constitutes 02037

New Construction of Fire Fighting Academies Under the View of Information Construction 02038

Improved PCA Method Based on RBF Neural Network for Multiple Response Parameters Optimization 02039

Research on the Development of E-commerce Model of Agricultural Products 02040

A Knowledge Modeling Method for Computer Graphics Design & Production Based on Ontology 02041

Study on the Transformation and Upgrade of E-Commerce Application in Manufacturing Industry 02042

An Optimizing Research about the Cloud Service Resource Based on the Requirements of the Users 02043

Application of text mining in library book procurement 02044

The Online Bookstore 02045

A Research on Development of Construction Industrialization Based on BIM Technology under the Background of Industry 4.0 02046

Flexible job-shop scheduling based on genetic algorithm and simulation validation 02047

A Big Data Decision-making Mechanism for Food Supply Chain 02048

Study on Effects of Incentive Factors on supply chain Performance in E-commerce Environment 02049

Research on Multiple Particle Swarm Algorithm Based on Analysis of Scientific Materials 02050

Laos Organization Name Using Cascaded Model Based on SVM and CRF 02051

Chinese-Lao Bilingual Named Entity Alignment Research 02052

Method of Word Segmentation in Laos Based on Maximal Matching of Syllables 02053

The Distribution of Words in Chinese and Laos Based on Cross Language Corpus 02054

Chinese and Thai Bilingual Topic Detection Online 02055

Investigate the Computer Information Network Security Technology and the Development Direction 02056

13^th Global Congress on Manufacturing and Management (GCMM 2016)

Research on CO₂ Quality Pipeline Transportation Based on Yanchang Oilfield CCUS 02004

Research on Friction and Wear Performance of TiB₂ Based Self-lubricating Ceramic composites 04009