| Issue |
MATEC Web Conf.
Volume 100, 2017
13th Global Congress on Manufacturing and Management (GCMM 2016)
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 5 | |
| Section | Part 3: Manufacturing innovation and Advanced manufacturing technology | |
| DOI | https://doi.org/10.1051/matecconf/201710003002 | |
| Published online | 08 March 2017 | |
Researched on Initiation Synchronization of Addressable Initiation System
Shanxi Applied physic-Chemistry Research Institute, State Key Laboratory of Applied physic-Chemistry Research, Xi’an of China
a yinguofu521@126.com
b chufengde01@163.com
Addressable initiation system was established by bus topology structure and information coding which owns the ability to safely and reliably control up to 256 initiators on a signal bus according to the communication protocol which is a robust two-way command response type protocol. Also, the two-way digital communication was achieved between intelligent bus controller and smart initiator by multiplexed serial data bus. The synchronous performance of addressable initiation system was researched. The result shows that each smart initiator will performance the built-in logic control, and arm electronic safe switch after receiving the synchronous signal sent by intelligent bus controller. Then they discharged the electrical energy of the firing capacitor as approximately synchronous, and were initiated synchronously at 4±0.2μs. It indicates that this initiation system has favorable synchronization.
Key words: Addressable initiation system / smart initiator / communication protocol / semiconductor bridge
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.