| Issue |
MATEC Web Conf.
Volume 100, 2017
13th Global Congress on Manufacturing and Management (GCMM 2016)
|
|
|---|---|---|
| Article Number | 03015 | |
| Number of page(s) | 8 | |
| Section | Part 3: Manufacturing innovation and Advanced manufacturing technology | |
| DOI | https://doi.org/10.1051/matecconf/201710003015 | |
| Published online | 08 March 2017 | |
Research on De-icing Robot and Its Motion Characteristics Overhead Transmission Line
1 College of Mechanical and Electrical Engineering, Harbin Engineering University, Nantong Street 145, 150001 Harbin, China
2 School of MechanicalEngineering, Hebei University of Technology, 300401 Tianjin, China
* Corresponding Email: jlwzh@163.com
In recent years, most areas of our country are suffering transmission line ice-coating disasters caused by cold weather. Aiming at this phenomenon, this paper designs a robot that not only can avoid the various fittings on the line, but also can cross the tension tower of phase line to jumper line. According to the development status of the deicing robot at home and abroad, the specific environment of the transmission line, as well as the function of crossing obstacle and tension tower, the design specifications and structural scheme is presented. On the basis of the mechanical structure design, the motion characteristics of deicing robot is researched, and the virtual prototype of the robot is simulated based on ADAMS, and key research is the factors which affect the gravity center when the robot crosses obstacle and tower. With the analysis of factors mentioned, robot stability greatly improved.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.