Issue |
MATEC Web Conf.
Volume 100, 2017
13th Global Congress on Manufacturing and Management (GCMM 2016)
|
|
---|---|---|
Article Number | 01016 | |
Number of page(s) | 7 | |
Section | Part 1: Automotive and Aerospace manufacturing | |
DOI | https://doi.org/10.1051/matecconf/201710001016 | |
Published online | 08 March 2017 |
Topology Optimization in Electric Car Body Frame Based on Optistruct
1 Institute of vehicle, Zhejiang Industry Polytechnic College, Shaoxing 312000, China
2 College of Mechanical & Electrical Engineering, Wenzhou University, Wenzhou 325035, China
a gdd1988@126.com
b 348607826@qq.com
c xuandongji@163.com
In order to optimize the structure of the electric car body frame, the static analysis of the car frame were carried on. For the goal of the frame’s weight minimum, OptiStruct software was used to topology optimization design. And the optimal material distribution program of the frame structure was got. Static strength before and after optimization was comprehensive compared through the stress, deformation. The results showed that the weight of frame after optimization was reduced by 18.96%, and the requirements of the strength and stiffness were ensured.
Key words: Electric car / static analysis / OptiStruct / topology optimization
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.