MATEC Web of Conferences

Open Access

Methods of increasing the efficiency of the worm gear 00001

Pavel Melnikov and Svetlana Schegoleva

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800001

• Abstract
• PDF (532.9 KB)
• References

Open Access

Interrelation of microstructure and thermodynamic parameters in TiNi alloy during multiple martensitic transformations 00002

Anna Churakova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800002

• Abstract
• PDF (1.010 MB)
• References

Open Access

Development of model of the quality of the appearance of paint and varnish coatings 00003

Valentina Loganina

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800003

• Abstract
• PDF (254.3 KB)
• References

Open Access

Improving the quality of production of gears in terms of errors in the profile of teeth in gear milling operations 00004

Damir Safarov and Alexey Kondrashov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800004

• Abstract
• PDF (367.1 KB)
• References

Open Access

Diagnosing of automotive alternators on thermal state 00005

Andrey Puzakov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800005

• Abstract
• PDF (785.0 KB)
• References

Open Access

Modeling of failures of the starter electric motor 00006

Andrey Puzakov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800006

• Abstract
• PDF (836.5 KB)
• References

Open Access

Increasing the operational life of the cutting tool based on stress relieving 00007

R.S. Chuikov, S.S. Chuikov, A.S. Stavyshenko and V.D. Samohvalov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800007

• Abstract
• PDF (386.1 KB)
• References

Open Access

On the influence of thermal processes on the dynamics of a drill during deep hole machining 00008

Leonid Kondratenko and Lubov Mironova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800008

• Abstract
• PDF (332.4 KB)
• References

Open Access

Usage of the influence coefficient during calculation of a nominal error of gas counters 00009

M.S. Ostapenko, M.A. Popova and A.M. Tveryakov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800009

• Abstract
• PDF (318.7 KB)
• References

Open Access

Development of technology for robotic laser welding of thin-walled products from heat-resistant alloys 00010

S.E. Krylova, M.I. Goltyapin, S.P. Olesnin and V.A. Zavyalov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800010

• Abstract
• PDF (1.027 MB)
• References

Open Access

Some peculiarities of aluminum and titanium alloys stamping 00011

Evgeny Galkin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800011

• Abstract
• PDF (331.0 KB)
• References

Open Access

Arctic Climate Insulation Systems 00012

Nina Umnyakova, Igor Bessonov, Alex Zhukov and Ekaterina Zinoveva

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800012

• Abstract
• PDF (519.7 KB)
• References

Open Access

The effectiveness of facade systems 00013

Nina Umnyakova, Igor Bessonov, Alex Zhukov and Ekaterina Zinoveva

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800013

• Abstract
• PDF (456.5 KB)
• References

Open Access

Mathematical modelling and optimization of the electroplating process with a rotating cathode to reduce the non-uniformity of the coating thickness 00014

Denis Solovjev, Inna Solovjeva and Viktoriya Konkina

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800014

• Abstract
• PDF (500.1 KB)
• References

Open Access

A research on magnetic properties of magnetic nanodispersed lubricants 00015

Alexander Bolotov, Vladislav Novikov and Olga Novikova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800015

• Abstract
• PDF (393.1 KB)
• References

Open Access

Thermal properties of products based on ABS / PC 00016

Natalia Romanova, Lenar Shafigullin, Azat Gabdrakhmanov and Svetlana Buyatova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800016

• Abstract
• PDF (287.6 KB)
• References

Open Access

Automatic compensation of tool disturbances, caused by an unstable cutting process 00017

Vladimir Gusev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800017

• Abstract
• PDF (534.6 KB)
• References

Open Access

Aerodynamic streams at cylindrical internal grinding by the textured wheels 00018

Vladimir Gusev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800018

• Abstract
• PDF (486.9 KB)
• References

Open Access

Mechanical behavior and fractographic analysis of a TiNi alloy with various thermomechanical treatment 00019

Anna Churakova, Anna Yudahina, Elina Kayumova and Nikita Tolstov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800019

• Abstract
• PDF (728.6 KB)
• References

Open Access

Structural and dynamic characteristics of technological power unit for heat treatment of vermiculite concentrates 00020

Anatolij Nizhegorodov, Alexey Gavrilin and Boris Moyzes

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800020

• Abstract
• PDF (309.1 KB)
• References

Open Access

Regulation of the cooling fan rotation speed, as an effective instrument for reducing mechanical consumption of energy 00021

George Lomakin, Sergey Kondakov and Ilya Kochnev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800021

• Abstract
• PDF (461.1 KB)
• References

Open Access

Simulation of thermal strength of the process of flat grinding of workpieces in intermittent circles 00022

Nikolai Vetkasov, Sergey Ulitin, Oleg Krupennikov, Valeriy Sapunov and Andrey Ankilov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800022

• Abstract
• PDF (505.8 KB)
• References

Open Access

Technologies for producing syntactic carbon foams with specified operational properties 00023

Engel Galimov, Elmira Sharafutdinova and Nazira Galimova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800023

• Abstract
• PDF (328.1 KB)
• References

Open Access

Modeling of process of gear milling for definition of the intense deformed state in replaceable many-sided plates of a worm mill 00024

E.V. Artamonov, V.V. Kireev and V.A. Zyryanov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800024

• Abstract
• PDF (601.3 KB)
• References

Open Access

Distribution of enterprise management resources based on parameters of a surge in demand for product 00025

Gulnara Akhmedyanova and Alexandr Pishchukhin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800025

• Abstract
• PDF (267.4 KB)
• References

Open Access

Simulation of repair and technical maintenance processes for power-generating equipment components at chemical factories 00026

Nikolay S. Efimenko, Ildar A. Sabanaev and Ilnur N. Madyshev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800026

• Abstract
• PDF (270.3 KB)
• References

Open Access

Mode parameters control under GMAW in connection with reflected heat flow 00027

Anton Melnikov, Mikhail Sholokhov, Darya Buzorina and Andrei Fiveyskiy

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800027

• Abstract
• PDF (805.4 KB)
• References

Open Access

Research modular tool system influence on the dynamic characteristics of the boring machines 00028

Alexey Rivkin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800028

• Abstract
• PDF (300.7 KB)
• References

Open Access

Processing of the edges of the parts on the robot complex 00029

Dmitriy Podashev and Yuriy Dimov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800029

• Abstract
• PDF (617.7 KB)
• References

Open Access

Sectional automatic adjustment of catalyst layers in gas and liquid phase reactors 00030

Nikolay Merentsov, Alexander Persidskiy, Mikhail Topilin and Alexander Golovanchikov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800030

• Abstract
• PDF (451.7 KB)
• References

Open Access

The use of industrial wastes from machine-building enterprises as packing materials for small-sized absorbers for gas emissions purification 00031

Nikolay Merentsov, Alexander Persidskiy, Vitaliy Lebedev and Alexander Golovanchikov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800031

• Abstract
• PDF (415.3 KB)
• References

Open Access

Features of calculation of steel structures of bridge cranes at variable loads 00032

A. L. Akhtulov, O. M. Kirasirov and M. O. Kirasirov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800032

• Abstract
• PDF (277.7 KB)
• References

Open Access

Thermal power stabilization of shapes of non-rigid shafts 00033

Alexander V. Bobrowskii, Oleg I. Drachev, Igor V. Turbin and Vyacheslav E. Epishkin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800033

• Abstract
• PDF (461.3 KB)
• References

Open Access

Thermal power treatment of step shafts 00034

Alexander V. Bobrowskii, Oleg I. Drachev, Igor V. Turbin and Vyacheslav E. Epishkin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800034

• Abstract
• PDF (428.6 KB)
• References

Open Access

Application of the complex parameter of strength and ductility to assess the state of the blades’ material at different periods of operation 00035

Irina Tsareva and Olga Berdnik

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800035

• Abstract
• PDF (666.6 KB)
• References

Open Access

The gas-dynamic antifriction coating of babbitt for bearings of the turbine rotor 00036

Irina Tsareva, Olga Berdnik, Lyudmila Krivina and Yuri Levanov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800036

• Abstract
• PDF (1.006 MB)
• References

Open Access

X-ray diffraction analysis of products sintered from isostatically pressed leaded bronze powders 00037

Evgeny Ageev and Anton Pereverzev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800037

• Abstract
• PDF (257.5 KB)
• References

Open Access

Principal issues of innovation activity development at machine building companies 00038

Oleg Blinkov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800038

• Abstract
• PDF (154.7 KB)
• References

Open Access

Study of the characteristics of a sliding bearing under dynamic loading 00039

Andrei Gorin, Anton Sytin and Alexey Rodichev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800039

• Abstract
• PDF (332.6 KB)
• References

Open Access

Stabilization device for hydraulic drive of an electric generator on a vehicle 00040

Alexander Lepeshkin, Alexander Medvedev and Alexander Mihajlin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800040

• Abstract
• PDF (396.1 KB)
• References

Open Access

Process of soil destruction: experimental results 00041

Irina Troyanovskaya, Olga Grebenshchikova and Ivan Zhitenko

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800041

• Abstract
• PDF (401.4 KB)
• References

Open Access

Effect of concentration and dispersion of filler fractions on adhesive strength and abrasion resistance of an epoxy and sand composite 00042

Alexander Mikhalchenkov, Marina Mikhalchenkova, Sergey Feskov and Alexandr Kononenko

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800042

• Abstract
• PDF (242.0 KB)
• References

Open Access

Using power-consuming materials for volume damping of thin-walled structural elements 00043

Vladimir Mironov, Dmitriy Ogorelkov and Olga Lukashuk

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800043

• Abstract
• PDF (246.6 KB)
• References

Open Access

Determining optimal kinematic parameters of a screen shoe used for separating breeding seed samples 00044

Maksim Moskovskiy, Victor Khamuev, Aleksei Dorokhov and Stanislav Gerasimenko

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800044

• Abstract
• PDF (441.4 KB)
• References

Open Access

Improvement of road traffic management system on the basis of mathematical and simulation modeling 00045

Denis Lomakin, Andrei Bodrov, Maksim Kulev and Andrei Kulev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800045

• Abstract
• PDF (211.5 KB)
• References

Open Access

Measures to ensure road traffic safety on controlled intersections 00046

Aleksandr Novikov, Ivan Novikov and Anastasiya Shevtsova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800046

• Abstract
• PDF (530.9 KB)
• References

Open Access

Formation of recommendations for the selection of types of connections for different types of crossroads based on the generalized imitation model 00047

Aleksandr Novikov, Sergey Eremin and Andrei Kulev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800047

• Abstract
• PDF (1.053 MB)
• References

Open Access

To the question of constructing measuring devices based on fluxgate sensors 00048

Anatolij Nikishechkin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800048

• Abstract
• PDF (465.3 KB)
• References

Open Access

Development of heat treatment modes for a two-phase titanium alloy to form regulated structure and properties complex 00049

Svetlana Skvortsova, Galina Gurtovaya, Maria Afonina, Natalya Ruchina and Gulnara Zaynetdinova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800049

• Abstract
• PDF (1.124 MB)
• References

Open Access

Study of the properties of metal powder received by plasma 00050

Azat Gabdrakhmanov, Lenar Shafigullin, Tansylu Gabdrakhmanova and Azat Galiakbarov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800050

• Abstract
• PDF (310.6 KB)
• References

Open Access

Alterations in the microhardness of a titanium alloy affected to a series of nanosecond laser pulses 00051

Ivan Ushakov and Yuri Simonov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800051

• Abstract
• PDF (653.5 KB)
• References

Open Access

The problem of forecasting emergency situations of technical objects 00052

Ekaterina Sokolova and Andrey Sokolov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800052

• Abstract
• PDF (521.9 KB)
• References

Open Access

Cement-based materials destruction under the action of deicing salts 00053

Ekaterina Potapova and Ivan Korchunov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800053

• Abstract
• PDF (1.063 MB)
• References

Open Access

Application of simulation methods to optimize the composition of technological complexes of machines 00054

Anton Novichenko and Aleksandr Kononenko

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800054

• Abstract
• PDF (448.1 KB)
• References

Open Access

Of the matrics of the equilibrium of the rod formation system based on the principle the duality of the problems of structures mechanics 00055

Vladimir Monakhov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800055

• Abstract
• PDF (291.8 KB)
• References

Open Access

Effect of Al-Y-Ce-La master alloy on structure formation, liquation processes and properties of AK7ch silumine (AL9) 00056

Ernst Kh. Ri, Khosen Ri and Aleksei V. Goncharov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800056

• Abstract
• PDF (847.9 KB)
• References

Open Access

Technology of obtaining REM-containing master alloy for silumins modification 00057

Ernst Kh. Ri, Khosen Ri and Mikhail A. Ermakov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800057

• Abstract
• PDF (393.2 KB)
• References

Open Access

Determination of the limiting values of the laser parameters to heat treatment of powder carbon steels surface 00058

Svetlana Oglezneva, Evgeny Morozov and Evgeny Usynin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800058

• Abstract
• PDF (461.6 KB)
• References

Open Access

Prospects for using aluminum matrix composite materials in the automotive industry 00059

Ivan Romanov, Elena Romanova and Evgeny Chernyshov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800059

• Abstract
• PDF (299.3 KB)
• References

Open Access

Elaboration of technology for manufacturing aluminum-based metal-matrix composite material strengthened with hollow ceramic microspheres for using thereof in underwater equipment 00060

Aleksey Romanov, Elena Romanova and Evgeny Chernyshov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800060

• Abstract
• PDF (225.9 KB)
• References

Open Access

Design basis development for centrifugal turbo machines with a coaxial impellers location for mining-and-metallurgical industry conditions 00061

S.V. Podbolotov, A.D. Kolga, B.M. Gabbasov and A.I. Kurochkin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800061

• Abstract
• PDF (778.7 KB)
• References

Open Access

Interfacing between the control ratio of mining excavator and an operator’s proficiency level 00062

Vladimir Velikanov, Natalja Dyorina and Ekaterina Rabina

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800062

• Abstract
• PDF (179.7 KB)
• References

Open Access

Practical implementation of a computer simulator complex for training mining excavator 00063

Vladimir Velikanov, Natalja Dyorina, Julia Yuzhakova and Olga Panfilova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800063

• Abstract
• PDF (219.0 KB)
• References

Open Access

Construction of a specialized control system for brush machine and rounding the cutting edges of a metal cutting tool 00064

Petr Nikishechkin, Nikita Grigoriev and Nadezhda Chervonnova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800064

• Abstract
• PDF (192.7 KB)
• References

Open Access

Ontological approach to the formation of subject-oriented knowledge bases in the field of computer-aided design 00065

Andrey Cherepashkov and Anastasia Sharaukhova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800065

• Abstract
• PDF (463.5 KB)
• References

Open Access

Development of the model of input control of timber for the enhancement of operational performance of sawn stream 00066

I.V. Eliseev, B.M. Shifrin and V.A. Sokolova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800066

• Abstract
• PDF (387.3 KB)
• References

Open Access

The effect of the surface structure of titanium alloy medical screws on their wear resistance 00067

Svetlana Skvortsova, Viktor Spektor, Oksana Pozhoga and Olga Gvozdeva

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800067

• Abstract
• PDF (877.8 KB)
• References

Open Access

Finite element analysis of the dynamic interaction between a single abrasive grain and a glass surface 00068

Anton Kurnenkov, Alexei Shurigin and Vladimir Glebov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800068

• Abstract
• PDF (425.4 KB)
• References

Open Access

Research of the mixing process in vortex static type devices 00069

Vitaliy Afanasenko and Petr Kulakov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800069

• Abstract
• PDF (674.5 KB)
• References

Open Access

Use of numerical modeling methods in desing of combined rectification column 00070

Ramilya Ibragimova, Vitaliy Afanasenko, Gleb Kudryavtsev and Denis Mazidullin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800070

• Abstract
• PDF (457.0 KB)
• References

Open Access

Multi-criteria security assessment of control and diagnostic data on the technological processes 00071

Igor Kotenko and Igor Parashchuk

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800071

• Abstract
• PDF (322.3 KB)
• References

Open Access

Research on technological capabilities of double-electrode welding of long fillet welds 00072

Andrei Fiveyskiy, Aleksei Mosin, Sergey Zverev and Ilya Polevoy

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800072

• Abstract
• PDF (586.6 KB)
• References

Open Access

The polymeric materials turning after workpiece processing with surface-active substances 00073

Oleg Erenkov, Daniil Yavorskii and Elena Yavorskaya

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800073

• Abstract
• PDF (487.2 KB)
• References

Open Access

Method for determining of the coatings thermophysical properties formed by the microarc oxidation 00074

Natalya Dudareva, Rida Gallyamova and Alexander Kruglov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800074

• Abstract
• PDF (904.4 KB)
• References

Open Access

Development of an algorithm for choosing the specialization of the left-turn lane in the zone of a controlled intersection 00075

Dmitry Likhachev, Sergey Dorokhin and Sergey Postavnichii

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800075

• Abstract
• PDF (516.6 KB)
• References

Open Access

New approach to the organization of entrances to cities using ITS 00076

Sergey Dorokhin, Evgenii Chirkov and Sergey Postavnichii

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800076

• Abstract
• PDF (439.4 KB)
• References

Open Access

Assessment of the level of influence of weather conditions on the mode of operation of the regulated intersection 00077

Anastasia Shevtsova, Andrey Kravchenko and Victoria Vasilyeva

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800077

• Abstract
• PDF (407.2 KB)
• References

Open Access

Mathematical models and methods of prolongation of operating lifetimes for expensive objects 00078

Vladimir Trukhanov, Mikhail Kukhtik and Natal’ya Fyodorova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800078

• Abstract
• PDF (286.0 KB)
• References

Open Access

Big data analytics of the technological equipment based on Data Lake architecture 00079

Ilya Kovalev, Ramil Nezhmetdinov and Denis Kvashnin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800079

• Abstract
• PDF (863.8 KB)
• References

Open Access

Promising agrofibers based on biodegradable polymers 00080

Yulia Tertyshnaya, Nelly Levina, Maria Podzorova and Irina Bidey

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800080

• Abstract
• PDF (886.4 KB)
• References

Open Access

Risk analysis in digital twin creation of machine building production 00081

Alexander Feofanov and Nikolay Baranov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800081

• Abstract
• PDF (132.2 KB)
• References

Open Access

Reverse and pull-away engines for the carrier rocket sustainer 00082

Michael Yu. Alies, Irec A. Solovatov and Nicholas W. Mitiukov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800082

• Abstract
• PDF (244.1 KB)
• References

Open Access

Increase of anaerobic polymer materials resistance to vibration loads and working fluids using nanofillers 00083

Alexandr Kononenko, Alexander Mikhalchenkov and Anastasiya Zabavina

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800083

• Abstract
• PDF (816.8 KB)
• References

Open Access

The method of calculating emissions of pollutants from road transport in an urban environment 00084

I. A. Teterina and E. V. Parsaev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800084

• Abstract
• PDF (350.3 KB)
• References

Open Access

Influence of deposition conditions on structure parameters and mechanical properties of multi-element coatings based on niobium nitride 00085

Vladimir Tabakov, Aleksey Chikhranov and Yana Dolzhenko

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800085

• Abstract
• PDF (483.0 KB)
• References

Open Access

Heat exchange of a roller with a particle from polymeric material when it is pressed into tissue 00086

Vladimir Fedyaev, Valentin Khaliulin, Marat Faskhutdinov, Alexey Belyaev and Liliya Sirotkina

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800086

• Abstract
• PDF (253.6 KB)
• References

Open Access

Calculation of the height parameters of the treated surface roughness under the influence of the flow of abrasive particles 00087

Georgi Tzordanidi, Oksana Pyatnitzkaya, Elena Fisunova, Tatyana Lavrenova and Olga Baryshnikova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800087

• Abstract
• PDF (355.5 KB)
• References

Open Access

Formation of Cr-Zr gradient layer by magnetron sputtering and ion mixing 00088

Egor B. Kashkarov, Dmitrii V. Sidelev, Maya R. Rombaeva, Viktor N. Kudiiarov and Anton Lomygin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800088

• Abstract
• PDF (683.5 KB)
• References

Open Access

The regional machine-building complex: structural-industrial transformation in modern economic realities 00089

Evgeniy Semenov, Alexandr Pishchukhin and Gulnara Akhmedyanova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800089

• Abstract
• PDF (187.2 KB)
• References

Open Access

Thermal stability of the carbon fibers with SiO₂ coating 00090

Rida Gallyamova, Sergei Galyshev, Fanil Musin and Vladimir Dokichev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800090

• Abstract
• PDF (498.6 KB)
• References

Open Access

Simulation of thermal treatment of mineral wool blanket 00091

Anton Pilipenko, Ekaterina Bobrova and Boris Efimov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800091

• Abstract
• PDF (885.9 KB)
• References

Open Access

Research of materials of Fe-C-Si and Fe-C-Al systems 00092

Rinat Bikulov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800092

• Abstract
• PDF (788.7 KB)
• References

Open Access

Contact geometry during indentation of a sphere into an elastoplastic half-space 00093

Peter Ogar, Denis Gorokhov, Artem Zhuk and Vladislav Kushnarev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800093

• Abstract
• PDF (958.7 KB)
• References

Open Access

Influence of the form of axisymmetric load on the stress-strain state of an elastoplastic half-space 00094

Peter Ogar, Denis Gorokhov, Leonid Mamaev and Vladislav Kushnarev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800094

• Abstract
• PDF (716.2 KB)
• References

Open Access

The cleaning process model of diesel fuel in an electric field 00095

Alexander Abramov, Alexander Morozov, Anastasia Koshkina, Sergey Petryakov and Julia Nuretdinova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800095

• Abstract
• PDF (648.9 KB)
• References

Open Access

Modeling of the structure and properties of a mineral wool cylinders 00096

Kazbek Ivanov and Boris Efimov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800096

• Abstract
• PDF (1.020 MB)
• References

Open Access

Studies of the structure and properties of materials of the Fe-C-Si system after centrifugation of the melt 00097

Rinat Bikulov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800097

• Abstract
• PDF (927.9 KB)
• References

Open Access

Thermostabilizing annealing analysis of organomorphic preforms made of oxidized polyacrylonitrile 00098

Pavel Prosuntsov, Evgeniy Bogachev and Alexander Elakov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800098

• Abstract
• PDF (358.8 KB)
• References

Open Access

The mathematical models for cutting force calculation during structural and corrosion-resistant steels` parts processing 00099

Alexey A. Zhdanov, Oleg A. Kursin and Pham Xuan Bach

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800099

• Abstract
• PDF (228.4 KB)
• References

Open Access

Influence of electro-acoustic coating of metals on ordering of dislocating structures 00100

Andrei Kochetov, Elena Fisunova, Tatyana Lavrenova and Olga Baryshnikova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800100

• Abstract
• PDF (135.2 KB)
• References

Open Access

Analysis of operating conditions of heavy-loaded and heat-stressed friction units of powerful internal combustion engines and development of copper nanocomposite powder materials for them 00101

Evgeny Shalunov, Sergey Shalunov and Yulia Vladimirova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800101

• Abstract
• PDF (1.175 MB)
• References

Open Access

Development of a software package for the tractor fleet formation in agricultural organizations 00102

Valeria Zubina and Alexey Kutyrev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800102

• Abstract
• PDF (186.5 KB)
• References

Open Access

Investigation of the process of abrasive waterjet cutting of steels based on numerical simulation 00103

Anton Kurnenkov, Alexei Shurigin and Vladimir Glebov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800103

• Abstract
• PDF (902.7 KB)
• References

Open Access

Determining the level of structural survivability to control the reliability of innovative economic systems 00104

Anna Ponikarova, Maksim Zotov and Irina Ponikarova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800104

• Abstract
• PDF (311.1 KB)
• References

Open Access

The model of control of reliability using the parameters of survivability in terms of innovation 00105

Anna Ponikarova, Maksim Zotov and Sergey Ponikarov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800105

• Abstract
• PDF (342.4 KB)
• References

Open Access

Theoretical substantiation of parameters of the planetary fruit separator 00106

Sergey V. Belousov, Sergey Yu. Onikienko and Darya M. Klinova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800106

• Abstract
• PDF (1.171 MB)
• References

Open Access

Theoretical determination of kinematic parameters of a nightshade fruit separator 00107

Sergey V. Belousov, Sergey Yu. Оnikienko, Nina S. Arakelyan and Anna I. Belousova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800107

• Abstract
• PDF (700.0 KB)
• References

Open Access

Flexural strength of porous ceramic-bonded composites for abrasive tools 00108

Yu. Bagayskov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800108

• Abstract
• PDF (339.7 KB)
• References

Open Access

Loads of road vehicles during piggyback transportation 00109

Aleksandr Tsyganov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800109

• Abstract
• PDF (330.7 KB)
• References

Open Access

Development of a method for the determination and registration of unauthorized data transmission channels at industrial manufactories 00110

Ilya Kovalev, Michael Babin and Petr Nikishechkin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800110

• Abstract
• PDF (334.1 KB)
• References

Open Access

Withdrawn article: Development of the radiant heating facilities for the testing of ceramic materials with operating temperatures up to 2000 K 00111

Riza S. Baldzhiev, Pavel V. Prosuntsov and Maksim O. Zabezhailov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800111

• Abstract

Open Access

Simulation and optimization of water-wall tube panels design for power boilers 00112

Maxim P. Kurepin and Mikhail Yu. Serbinovskiy

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800112

• Abstract
• PDF (606.0 KB)
• References

Open Access

Methods for obtaining and processing biocompatible medical materials 00113

Mikhail Ivanov, Elena Poddubskaya and Nadezda Uchevatkina

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800113

• Abstract
• PDF (317.5 KB)
• References

Open Access

About the need of carrying out researches of wear resistance of groups of mating parts for ensuring anticipatory scheduling of repair influences 00114

Tatyana Ivanova, Nikolay Revenko and Olga Silivanova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800114

• Abstract
• PDF (457.9 KB)
• References

Open Access

Testing the efficiency of abrasive treatment of reconditioned parts using coolant cleaning in a magnetic sump 00115

Boris Avdeyev, Aleksey Vyngra and Aleksander Bordiug

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800115

• Abstract
• PDF (359.7 KB)
• References

Open Access

Developing processes for manufacturing metal aviation technology components using powder bed fusion methods 00116

Anastasia Filatova, Tatiana Tarasova and Pavel Peretyagin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800116

• Abstract
• PDF (420.6 KB)
• References

Open Access

The providing durability of the movable square-sided spline joints by electromechanical treatment of the working surfaces 00117

Alexander Morozov, Gennady Fedotov, Lilia Fedorova, Damir Musharapov and Lilia Khabieva

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800117

• Abstract
• PDF (967.0 KB)
• References

Open Access

Mathematical model for controlling CO2 concentration in greenhouses late in MATLAB 00118

Sergey N. Ivliev, Evgeniy G. Alekseev, Stanislav A. Shikov and Anton V. Volkov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800118

• Abstract
• PDF (236.4 KB)
• References

Open Access

Identification of structural defects in composite materials by the thermal imaging non-destructive testing method 00119

Andrey Kokurov, Igor Odintsev, Boris Chichigin and Dmitry Subbotin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800119

• Abstract
• PDF (298.1 KB)
• References

Open Access

Okkam - advanced morphological approach as method for computer aided innovation (CAI) 00120

Dmitry Rakov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800120

• Abstract
• PDF (796.3 KB)
• References

Open Access

Research of modes and work of a combined unit for subsoil application of protective-stimulating liquids in spaces between rows of gardens and vineyards 00121

Svetlana M. Borisova, Sergey K. Papusha, Vladimir K. Papusha and Nikolay A. Nikitenko

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800121

• Abstract
• PDF (278.3 KB)
• References

Open Access

Device for preliminary deformation of corncobs when harvesting corn for grain 00122

Sergey K. Papusha, Vladimir K. Papusha and Nikolay A. Nikitenko

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800122

• Abstract
• PDF (167.8 KB)
• References

Open Access

Сorrection сalculation of the heat source power during plasma-powder surfacing of the necks of stepped shafts 00123

G.R. Latypova, N.N. Karpenko and R.A. Latypov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800123

• Abstract
• PDF (206.0 KB)
• References

Open Access

Selection of design structure and method of energy transformation in wind power plant 00124

Andrey Pushkarev, Dmitriy Khvorenkov, Olga Varfolomeeva, Mikhail Dyagelev and Ivan Pushkarev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800124

• Abstract
• PDF (416.6 KB)
• References

Open Access

X-ray microanalysis of powders, obtained by electroerosion dispersion of the alloy W-Ni-Fe 00125

R.A. Latypov, E.V. Ageeva and G.R. Latypova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800125

• Abstract
• PDF (712.3 KB)
• References

Open Access

Phosphate coatings as a way to protect steel reinforcement from corrosion 00126

Sergey Fedosov, Varvara Roumyantseva and Viktoriya Konovalova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800126

• Abstract
• PDF (358.9 KB)
• References

Open Access

Shape and morphology of the particles surface of electroerosive powders of micro- and nanometric fractions, obtained from H17MYuA steel in kerosene 00127

E.V. Ageev, S.V. Khardikov, E.A. Vorobyev and A.A. Sysoev

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800127

• Abstract
• PDF (142.3 KB)
• References

Open Access

Concept design – creating an image of the future 00128

Ilya Lepeshkin, Alexander Lepeshkin and Pavel Tarasov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800128

• Abstract
• PDF (775.8 KB)
• References

Open Access

Modeling of the high-strength clinker-free binder structure 00129

Victoria Petropavlovskaya, Tatiana Novichenkova, Kirill Petropavlovskii and Аleksandr Buryanov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800129

• Abstract
• PDF (867.2 KB)
• References

Open Access

Eco-friendly polymer materials for agricultural purposes 00130

Mariya Podzorova, Yulia Tertyshnaya and Anatoly Popov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800130

• Abstract
• PDF (374.1 KB)
• References

Open Access

The impact analysis of the gaps in kinematic pairs on dynamic processes in cyclic mechanisms 00131

Viktor Telegin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800131

• Abstract
• PDF (743.8 KB)
• References

Open Access

Design of simulation models and study on their basis the dynamics of the cyclic mechanisms 00132

Viktor Telegin and Igor Telegin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800132

• Abstract
• PDF (477.2 KB)
• References

Open Access

Modeling the composition of fine-grained modified concrete elaborated with vibropressing technology 00133

E. R. Pyataev and A. Y. Ushakov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800133

• Abstract
• PDF (411.6 KB)
• References

Open Access

Experimental research method when developing a mathematical model for calculating cutting speed in the course of turning steels with a coated tool 00134

Zhanna Tikhonova, Evgeniy Frolov, Dmitriy Krainev and Alexander Plotnikov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800134

• Abstract
• PDF (417.2 KB)
• References

Open Access

Automation of assessment of the strain state of metal cutting machine mechanism elements on the basis of response function application 00135

Mikhail Kosov, Svetlana Lukina and Maria Ametova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800135

• Abstract
• PDF (296.4 KB)
• References

Open Access

Simulation and research of cylindrical broach structures stress-strain state in solidworks system 00136

Svetlana Lukina, Anna Yakovleva and Olga Zimovets

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800136

• Abstract
• PDF (655.8 KB)
• References

Open Access

Diagnostics of the condition of sucker-rod pumping units after the analysis of dynamogram cards 00137

Georgy Milovzorov, Aleksei Ilyin and Pavel Shirobokov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800137

• Abstract
• PDF (1.053 MB)
• References

Open Access

Impact of shock-wave loading regimes on structural and elastic characteristics of a single-component abrasive tool 00138

Mariya Polyanchikova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800138

• Abstract
• PDF (399.4 KB)
• References

Open Access

Researches of the combined coulter working process for direct strip sowing of seeds 00139

Victor Khamuev, Oleg Pisarev, Andrey Boiko and Dmitriy Podlesniy

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800139

• Abstract
• PDF (351.2 KB)
• References

Open Access

Experimental studies of combined coulter for direct strip sowing of seeds 00140

Oleg Pisarev, Maksim Moskovskiy, Aleksey Dorockhov, Anatoly Gulyaev and Aleksandr Lavrov

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800140

• Abstract
• PDF (416.5 KB)
• References

Open Access

Consideration of hydraulic limitations in setting the mode parameters of combined piercing the holes 00141

Svetlana Vasilevskaya

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800141

• Abstract
• PDF (682.5 KB)
• References

Open Access

Determination of system connections of hot rolled steel sheet manufacturing process 00142

Elena Shiriaeva and Marina Polyakova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800142

• Abstract
• PDF (429.9 KB)
• References

Open Access

Investigation of the effect of laser radiation on the instrumental composition to determine the modes of combined processing 00143

Stanislav Vlasov, Alexander Averyanov, Vladimir Tabakov and Valentina Vlasova

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800143

• Abstract
• PDF (470.5 KB)
• References

Open Access

Predicting the volume shrinkage while manufacturing the GTE turbine blades 00144

Roman Vdovin

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800144

• Abstract
• PDF (769.0 KB)
• References

Open Access

Electro-slag heating of parts surfaces by welding of protective coatings by the method of immersion 00145

Vladimir Fedyaev, Petr Osipov, Alexey Belyaev and Liliya Sirotkina

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800145

• Abstract
• PDF (454.4 KB)
• References

Open Access

Application of ultrasonic testing method for determining defects of hot-deformed powder materials 00146

Maxim S. Egorov, Andrey A. Atrokhov, Evgeniy A. Nedostup and Ekaterina V. Vasilyeva

Published online: 18 November 2019

DOI: https://doi.org/10.1051/matecconf/201929800146

• Abstract
• PDF (695.8 KB)
• References

Open Access

Retractation note: Development of the radiant heating facilities for the testing of ceramic materials with operating temperatures up to 2000 K 00147

Riza S. Baldzhiev, Pavel V. Prosuntsov and Maksim O. Zabezhailov

Published online: 19 February 2020

DOI: https://doi.org/10.1051/matecconf/201929800147

• Abstract
• PDF (122.8 KB)