MATEC Web Conf.
Volume 298, 2019International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2019)
|Number of page(s)||6|
|Published online||18 November 2019|
Effect of Al-Y-Ce-La master alloy on structure formation, liquation processes and properties of AK7ch silumine (AL9)
PNU, 680035 Khabarovsk, Russia
* Corresponding author: email@example.com
The regularities of changes in the composition and properties (micro- and nanohardness, HB hardness) of the structural components - α-solid solution and eutectic components of the AK7ch alloy (AL9) depending on the value of the addition of Al-Y-Ce-La master alloy are established. With an increase in the addition of Al-Y-Ce-La master alloy a sharp change is observed in the composition and properties of the structural components of the AK7ch alloy - α-solid solution Si in aluminum and eutectic α + Si, as well as complex-doped aluminides from Si, Fe and rear earth metals (REM). The structural components of the AK7ch alloy are identified with the addition of an increasing amount of Al-Y-Ce-La master alloy (α-solid solution of Si in aluminum, eutectic α+Si, complex-doped aluminides of rare-earth metals of variable composition AlxSiyREMz and AlxSiyFezREMν). A correlation between the solubility of silicon in α-solid solution and its microhardness is found. To increase microhardness of the eutectic and hardness of the AK7ch alloy, it is necessary to add the synthesized ligature in the amount of 0.1 wt.%.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.