Open Access
Issue |
MATEC Web Conf.
Volume 298, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00067 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/matecconf/201929800067 | |
Published online | 18 November 2019 |
- I.G. Belenkiy, G.D. Sergeev, Yu.V. Gudz, F.S Grigoryan, History, modern state and perspectives of development of plate internal fixation methods, Sovremennye Problemy Nauki i Obrazovaniya (Modern Problems of Science and Education), № 5, pp. 77-91 (2016). [Google Scholar]
- M.E. Muller, M. Algower, R. Schneider, H. Willenger, Manual of Internal Fixation (Springer-Verlag Berlin Heidelberg, 1992). [CrossRef] [Google Scholar]
- AO Principles of Fracture Management, Edited by R. Buckley, Ch. Moran, Th. Apivatthakakul (Thieme (Stuttgart), 2018). [Google Scholar]
- K.K. Romanenko, A.I. Belostotsky, D.V. Prozorovsky, G.G. Golka, Functions and types of plates and screws in modern osteosynthesis, Ortopediya, Travmatologiya i Protezirovanie (Orthopedics, Traumatology and Prosthetics), №1, pp. 68–75 (2010). [CrossRef] [Google Scholar]
- E. Gautier, S. Perren, J. Cordey Effect of plate position relative to bending direction on the rigidity of a plate osteosynthesis. A theoretical analysis, Injury, v. 31, pp. 14–20, (2000). [CrossRef] [Google Scholar]
- A.M. Mamonov, V.S. Spektor, E.A. Lukina, S.M. Sarychev, The use of vacuum ion-plasma nitriding to increase the wear resistance of medical implants, Titan, №2 (28), pp. 23-30 (2010). [Google Scholar]
- S. Gokul Lakshmi, S. Tamilselvi, N. Rajendran, D. Arivuoli, Effect of N+ ion implantation on the corrosion behaviour of Ti–6Al–7Nb and Ti–5Al–2Nb–1Ta orthopaedic alloys in Hanks solution, Journal of Applied Electrochemistry, v. 34, pp. 271–276 (2004). [CrossRef] [Google Scholar]
- J. Kim, W.J. Lee, H.W. Park, Mechanical properties and corrosion behavior of the nitriding surface layer of Ti-6Al-7Nb using large pulsed electron beam (LPEB), Journal of Alloys and Compounds, v. 679, pp. 138-148 (2016). [CrossRef] [Google Scholar]
- A.A. Il’in, A.M. Mamonov, V.N. Karpov, L.M. Petrov, A.V. Ovchinnikov, Complex technologies for the creation of wear-resistant high-loaded endoprostheses components for large joints from titanium alloys, Tekhnologiya Mashinostroeniya (Engineering Technology), №9, pp. 43-46 (2007). [Google Scholar]
- A.A. Il’in, V.N. Fedirko, A.M. Mamonov, S.M. Sarychev, Yu.V. Chernyshova, The influence of complex processing technologies on the structural state of the surface and the operational properties of medical implants made of VT6 titanium alloy, Titan, №4 (46), pp. 4-11 (2014). [Google Scholar]
- M.V. Gomonay, Proizvodstvo toplivnyh briketov. Drevesnoe syr’e, oborudovanie, tekhnologii, rezhimy raboty (Production of fuel briquettes. Wood raw materials, equipment, technologies, operating modes) (MGUL, Moscow, 2006). [Google Scholar]
- B.A. Kolachev, B.I. Elagin, V.A. Livanov, Metallovedenie i termicheskaya obrabotka cvetnyh metallov i splavov (Metallurgy and heat treatment of non-ferrous metals and alloys) (MISiS, Moscow, 2005). [Google Scholar]
- A.A. Il’in, V.V. Plihunov, L.M. Petrov, V.S. Spektor, Vakuumnaya ionno-plazmennaya obrabotka (Vacuum ion-plasma treatment) (Al’fa-M: INFRA-M, Moscow, 2014). [Google Scholar]
- B.N. Arzamasov, A.G. Bratuhin, Yu.S. Eliseev, Ionnaya himiko-termicheskaya obrabotka splavov (Ion chemical-thermal treatment of alloys) (MSTU named after N.E. Bauman, Moscow, 1999). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.