Issue |
MATEC Web Conf.
Volume 298, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00121 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/matecconf/201929800121 | |
Published online | 18 November 2019 |
Research of modes and work of a combined unit for subsoil application of protective-stimulating liquids in spaces between rows of gardens and vineyards
Federal State Budgetary Educational Institution of Higher Education “Kuban State Agrarian University named after I.T. Trubilin”, Krasnodar, Russia
* Corresponding author: sergey_belousov_87@mail.ru
The combined unit is used for tillage and subsurface belt application of protective and stimulating liquids and microorganisms into the soil. New technology offers for the task to use pneumatic slotted sprayers with jet-forming device that is linked with a compressor that delivers air to transform the operation fluid from the tank in the aerial-droplet jet processing lower layers of the soil simultaneously with cultivation. Protective shields save the sprayer from deformation and breakage. To obtain the required range of the jet, the angle of inclination of the sprayer is adjusted. The supply line of operation fluid has an equalizing capacity to change the flow rate of the operation fluid. The basis of the development of sprayers was the task of development of a plane-parallel jet capable of spreading to a distance to 2 m with an adjustable width of a grip m/s. there were conducted the researches of performance (charge) of pneumatic slotted sprayer depending on air pressure given to in slotted nozzles of the sprayer.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.