| Issue |
MATEC Web Conf.
Volume 298, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2019)
|
|
|---|---|---|
| Article Number | 00116 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/matecconf/201929800116 | |
| Published online | 18 November 2019 | |
Developing processes for manufacturing metal aviation technology components using powder bed fusion methods
FGBOU VO “MSTU” STANKIN”, 127994 GSP-4 Moscow Vadkovsky lane 1, Russia
* Corresponding author: anastasia.a.filatova@yandex.com
Favorable parameters for selective melting methods using electron and laser radiation have been established to obtain the required geometric, physical and mechanical characteristics of thin-walled parts for aviation purposes from H18N9T (analogue AISI 321) and Ti6Al4V alloys. Parts were manufactured and field tests were carried out on the stand. It has been shown that the technological processes developed using the SLM and SEBM methods can be recommended for the manufacture of thin-walled parts working in conditions of rapidly changing deformations.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.