Free Access to the whole issue

Open Access

About the conference

Published online: 02 December 2019

• PDF (807 KB)

Open Access

Statement of Peer review

Published online: 02 December 2019

• PDF (630 KB)

Foreword

Open Access

Opening address 00001

N. Balc

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929900001

• Abstract
• PDF (91.16 KB)

Additive Manufacturing and Non-traditional Technologies

Open Access

Influence of the process parameters on mechanical properties of the final parts obtained by selective laser sintering from PA2200 powder 01001

Luciana Laura Dincă (Shamieh), Nicoleta Mirela Popa, Nichita Larisa Milodin, Comsa Stanca and Doina Gheorghiu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901001

• Abstract
• PDF (433.7 KB)
• References

Open Access

Preliminary Study of Electrochemical Advanced Oxidation of Organic Dyes on TiO₂ 01002

Alexandra Banu, Madalina Mocirla and GizemNur Soylu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901002

• Abstract
• PDF (428.3 KB)
• References

Open Access

Challenges of additive manufacturing in production systems 01003

Angela Luft, Andreas Gebhardt and Nicolae Balc

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901003

• Abstract
• PDF (318.5 KB)
• References

Open Access

Operating limits for beam melting of glass materials 01004

Fabian Eichler, Marco Skupin, Laura Katharina Thurn, Susanne Kasch and Thomas Schmidt

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901004

• Abstract
• PDF (1.051 MB)
• References

Open Access

The effects of growth TiO₂ nanotubes on forged Ti₆Al₄V alloy and selectivelaser sintered Ti₆Al₄V alloy surfaces for environment and medical applications 01005

Luciana Laura Dincă (Shamieh) Boulven, Alexandra Banu, Gizem Nur Soylu, Gabriel Dobri and Madalina Elena Mocirla (Mihai)

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901005

• Abstract
• PDF (375.8 KB)
• References

Open Access

Building Multi-Material components by Direct Laser Deposition 01006

Matteo Perini, Sasan Amirabdollahian and Paolo Bosetti

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901006

• Abstract
• PDF (504.2 KB)
• References

Open Access

Research on improving the accuracy of FDM 3D printing process by using a new designed calibrating part 01007

Răzvan Păcurar, Valentin Buzilă, Ancuţa Păcurar, Eugen Guţiu, Sergiu Dan Stan and Petru Berce

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901007

• Abstract
• PDF (631.9 KB)
• References

Open Access

Research regarding the design and manufacturing of hand orthosis by using Fused Deposition Modeling technology 01008

Ancuţa Păcurar, Monica Rău, Răzvan Păcurar, Eugen Guţiu, Laura Bacali and Cosmin Cosma

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901008

• Abstract
• PDF (699.8 KB)
• References

Open Access

Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads 01009

Karim Abbas, Laura Thurn, Julia Kessler and Fabian Eichler

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901009

• Abstract
• PDF (527.3 KB)
• References

Open Access

Design and manufacture of life size human model using material extrusion and vat photopolymerization additive processes 01010

Ivan Molnar, David Michal, Stefan Simon, Ladislav Morovic and Peter Kostal

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901010

• Abstract
• PDF (541.5 KB)
• References

Open Access

Sweat glands module with integrated sensors designed for Additive Manufacturing 01011

Ioan Turcin, Ali Abdallah, Cosmin Cosma, Thomas Thiebet, Daniela Zavec and Nicolae Balc

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901011

• Abstract
• PDF (521.0 KB)
• References

Open Access

The kinematic approach to edge-chipping in rotary ultrasonic machining of Al₂O₃ 01012

Marcel Kuruc, Marek Zvončan and Jozef Peterka

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901012

• Abstract
• PDF (474.3 KB)
• References

Open Access

Proposal for Cryogenic Deburring Equipment’s Design and Thermal Insulation 01013

Rares Campean and Liana Hancu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929901013

• Abstract
• PDF (450.0 KB)
• References

Automation of Manufacturing Systems and Assembly

Open Access

Group technology in the flexible manufacturing system 02001

Peter Kostal, Andrea Mudrikova and David. Michal

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929902001

• Abstract
• PDF (636.9 KB)
• References

Open Access

Positioning system for assembly and manufacturing tasks 02002

Radu-Eugen Breaz and Sever-Gabriel Racz

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929902002

• Abstract
• PDF (522.8 KB)
• References

Open Access

Proposal for a method of measurement and control of surface quality in the course of abrasive waterjet cutting of material 02003

Ján Kmec, Marta Harničárová, Cristina Borzan, Marian Borzan, Jan Valíček, Jiří Kříž and Milena Kušnerová

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929902003

• Abstract
• PDF (846.5 KB)
• References

Open Access

Taking brain-computer-interfacing one step further: a portable, wireless system coupled with online linear discriminant analysis for the detection of error-related potentials 02004

Dorina Ancău, Nicolae-Marius Roman and Mihai Ancău

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929902004

• Abstract
• PDF (769.4 KB)
• References

Open Access

Into the early steps of Virtual Commissioning in Tecnomatix Plant Simulation using S7-PLCSIM Advanced and STEP 7 TIA Portal 02005

Daynier Rolando Delgado Sobrino, Roman Ružarovský, Radovan Holubek and Karol Velíšek

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929902005

• Abstract
• PDF (452.6 KB)
• References

Open Access

A case study of robotic simulations using virtual commissioning supported by the use of virtual reality 02006

Roman Ružarovský, Radovan Holubek, Daynier Rolando Delgado Sobrino and Karol Velíšek

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929902006

• Abstract
• PDF (978.1 KB)
• References

Open Access

Evaluation of the effectiveness of implementing production logistics automation systems supported by computer simulation tools 02007

Dariusz Więcek, Dorota Więcek, Ivan Kuric, Monika Bučková and Martin Krajčovič

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929902007

• Abstract
• PDF (565.1 KB)
• References

Open Access

The future of industry with collaborative robots 02008

Miriam Matúšová, Marcela Bučányová and Erika Hrušková

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929902008

• Abstract
• PDF (409.7 KB)
• References

Open Access

Modelling and simulation of a flexible packaging system for detergents 02009

Florin Blaga, Alin Pop, Iulian Stănăşel, Voichiţa Hule and Claudiu Indre

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929902009

• Abstract
• PDF (567.7 KB)
• References

Open Access

Innovative Solutions of the Automated Guided Vehicles in Industrial Manufacturing 02010

Dan Bizubac, Bernd Otto Hörmann and Marcel Sabin Popa

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929902010

• Abstract
• PDF (598.3 KB)
• References

CAD-CAM

Open Access

Optimization and efficiency of toolpath generation in CAD/CAM system 03001

Tomáš Dodok and Nadežda Čuboňová

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903001

• Abstract
• PDF (493.5 KB)
• References

Open Access

Effect of the Weight reduction of a Gear Wheel on Modal Characteristics 03002

Katarina Monkova, Peter Monka, Jozef Tkac, Romana Hricova and Dusan Mandulak

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903002

• Abstract
• PDF (556.3 KB)
• References

Open Access

Preliminary analysis of tower crane as a type of truss structure 03003

Slavomir Hric, Jozef Tkac, Darina Matiskova, Milan Micko and Dusan Mandulak

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903003

• Abstract
• PDF (586.2 KB)
• References

Open Access

The Design and the Process Technology of a Rotational Mold 03004

Alina Bianca Pop, Gheorghe Ioan Pop and Mihail Aurel Țîțu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903004

• Abstract
• PDF (560.8 KB)
• References

Open Access

Parametric design of a complex part in a FEM environment 03005

Mădălina Ioana Blaj and Gheorghe Oancea

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903005

• Abstract
• PDF (423.8 KB)
• References

Open Access

VR 3D Education for Vocational Training 03006

Sven Maricic, Donald Radolovic, Ivan Veljovic and Roberta Raguz

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903006

• Abstract
• PDF (610.7 KB)
• References

Open Access

Optimisation of production processes with the use of the modelling and simulation method 03007

Dariusz Plinta and Patrik Grznar

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903007

• Abstract
• PDF (461.4 KB)
• References

Open Access

Designing a testing device for customized hip prosthesis 03008

Dan Leordean, Florin-Andrei Purdea, Mihai Țepeș and Andrei Vasile Valach

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903008

• Abstract
• PDF (1.067 MB)
• References

Open Access

Researches on the design of customized femoral implant 03009

Dan Leordean, Tatiana Ciobanu and Mircea Rusu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903009

• Abstract
• PDF (637.8 KB)
• References

Open Access

Design of shape and dimensions of exchangeable jaws for pneumatics chuck of CNC lathe EMCO Concept TURN 105 03010

Marcela Bučányová, Erika Hrušková and Martina Kusá

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903010

• Abstract
• PDF (537.0 KB)
• References

Open Access

Parametrised Design of a Cutting Device Used for High Tibial Osteotomy 03011

Nicolae Florin Cofaru, Ileana Ioana Cofaru, Radu Emanuil Petruse, Milan Rackov, Mirko Blagojevic and Nenad Marjanovic

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903011

• Abstract
• PDF (974.1 KB)
• References

Open Access

Algorithm for designing a hydraulic scissor lifting platform 03012

Cornel Ciupan, Emilia Ciupan and Emanuela Pop

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929903012

• Abstract
• PDF (615.6 KB)
• References

Machining Processes and Quality Assurance

Open Access

Comparison study regarding bearing performance on 3 types of air bearingsusing Dyrobes software 04001

Sigismund Becze and Gheorghe Ioan Vuscan

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904001

• Abstract
• PDF (731.8 KB)
• References

Open Access

Influence of Coolant Pressure Size on Surface Roughness when Stainless Steel Machining 04002

Robert Cep, Lenka Cepova, Cristina Stefana Borzan, Jiri Kasal, Marek Sadilek, Dagmar Sokova, Michal Hatala, Jana Petru, Dana Stancekova, Marek Pagac et al. (2 more)

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904002

• Abstract
• PDF (619.4 KB)
• References

Open Access

Use of Neural Networks in Tool Wear Prediction 04003

Juraj Kundrík, Marek Kočiško, Martin Pollák, Monika Telišková, Anna Bašistová and Zdeněk Fiala

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904003

• Abstract
• PDF (578.2 KB)
• References

Open Access

Application of industrial robot in 5-axis milling process 04004

Martin Pollák, Monika Telišková, Marek Kočiško and Petr Baron

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904004

• Abstract
• PDF (442.2 KB)
• References

Open Access

Risk Assessment of Physical Security within a Technologized Knowledge Based Organization 04005

Mihail Aurel Țîțu, Alina Bianca Pop and Costel Ceocea

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904005

• Abstract
• PDF (348.7 KB)
• References

Open Access

Application of New Generation Geometrical Product Specifications in the practice in Small and Medium Sized enterprises 04006

Pavlina Toteva and Krasimira Koleva

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904006

• Abstract
• PDF (710.9 KB)
• References

Open Access

Comparison study between two types of nozzles for a turbocharger balancing machine using ANSYS software 04007

Sigismund Becze and Gheorghe Ioan Vuscan

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904007

• Abstract
• PDF (571.6 KB)
• References

Open Access

Comparative Assessment of Wear Indicators in Grinding Discs During Grinding of Selected Steels 04008

Jerzy Józwik, Ivan Kuric and Andrzej Łukaszewicz

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904008

• Abstract
• PDF (628.4 KB)
• References

Open Access

Evaluation of accuracy of seamless steel tube scanning by industrial computed tomography 04009

Michaela Kritikos, Ivan Buranský, Eva Buranská and Milan Mojžiš

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904009

• Abstract
• PDF (524.5 KB)
• References

Open Access

Non-destructive investigation of polymer-metal bonds using a VibroMap1000 holographic vibrometer 04010

Zawadzki Pawel, Meijer Frans, Stachowska Ewa and Legutko Stanisław

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904010

• Abstract
• PDF (907.2 KB)
• References

Open Access

The influence of the cutting parameters on the pullout resistance of the M8 thread processed by tapping into the SikaBlock M960 material 04011

Sandor Ravai-Nagy

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904011

• Abstract
• PDF (651.8 KB)
• References

Open Access

Study on milling strategies influence on the quality characteristics in case of composite material 04012

Vasile Ceclan, Alexandru Popan, Sorin Grozav and Alina Popan

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904012

• Abstract
• PDF (911.8 KB)
• References

Open Access

Research regarding tactile scanning versus optical scanning 04013

Marius Bulgaru, Vlad Bocăneț and Mircea Muntean

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904013

• Abstract
• PDF (597.5 KB)
• References

Open Access

Study on chip fragmentation and hole quality in drilling of aluminium 6061 alloy with high pressure internal cooling 04014

Ioan Alexandru Popan, Alina Ioana Popan, Alexandru Carean, Domnita Fratila and Adrian Trif

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929904014

• Abstract
• PDF (502.5 KB)
• References

Manufacturing Engineering

Open Access

Optimization of the Production Process of Vibrocasted Refractory Products 05001

Martin Kyncl, Jiri Kyncl and Michal Slany

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905001

• Abstract
• PDF (425.0 KB)
• References

Open Access

The effect of the number of inference rules of a fuzzy controller on the quality of control of a mobile robot 05002

Patrik Kósa, Martin Olejár, Zuzana Palková, Dušan Hrubý, Vladimír Cviklovič, Marta Harničárová and Jan Valíček

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905002

• Abstract
• PDF (754.2 KB)
• References

Open Access

Study and Performance Improvement of the Drive Systems for a Class of Machine Tools 05003

Mikho Mikhov and Marin Zhilevski

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905003

• Abstract
• PDF (489.7 KB)
• References

Open Access

Calculating the efficiency indicators in implementing purchase processes 05004

Vanessa Prajová, Mária Homokyová and Martina Horvátová

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905004

• Abstract
• PDF (328.5 KB)
• References

Open Access

Modular fastening system and tool–holder working unit for incremental forming 05005

Melania Tera, Claudia–Emilia Gîrjob, Cristina–Maria Biriș and Mihai Crenganiș

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905005

• Abstract
• PDF (735.1 KB)
• References

Open Access

Some challenges to manufacturing engineer education process at TU – Varna 05006

Pavlina Toteva–Lyutova, Krasimira Koleva and Nadezhda Tsoneva

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905006

• Abstract
• PDF (566.5 KB)
• References

Open Access

Shape distortion analysis of drawing die by optical 3D scanning 05007

Ladislav Morovič, Ján Urminský and Martin Ridzoň

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905007

• Abstract
• PDF (686.4 KB)
• References

Open Access

Study of health and safety in the manufacturing industry using Pareto analysis 05008

Petru Iulian Mureșan, Ioan Miloșan, Dorin Senchetru, Adrian Nicolae Reit, Teodor Pisu Machedon and Gheorghe Oancea

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905008

• Abstract
• PDF (527.8 KB)
• References

Open Access

Method and program for the interpolation of experimental results of determining the mechanical properties of mineral composites for modern machine–tools 05009

Mihai Ciupan, Marcel Popa and Emilia Ciupan

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905009

• Abstract
• PDF (490.7 KB)
• References

Open Access

New materials obtained by rubber recycling from industrial waste 05010

Simona Sorina GABRIAN, Sorin–Dumitru GROZAV, Gabriel Nicodim CIUŞCĂ, Vasile Adrian CECLAN, Antoniu TURCU and Stanislaw LEGUTKO

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905010

• Abstract
• PDF (457.5 KB)
• References

Open Access

Industrial Intelligent Software Applications of the Overall Equipment Effectiveness (OEE) in Manufacturing 05011

Bernd Otto Hörmann, Dan Bizubac and Marcel Sabin Popa

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929905011

• Abstract
• PDF (531.1 KB)
• References

Processes of Plastics and Composite Materials; Environmental Engineering

Open Access

Effect of thermal degradation on rheological properties of polymeric materials 06001

Jozef Dobránsky and Zigmund Doboš

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929906001

• Abstract
• PDF (362.3 KB)
• References

Open Access

Using Carbon-fibre Reinforcement with a 5-axis Material Extrusion System 06002

Nathaniel Kaill, Patrick Pradel, Guy Bingham and R Ian Campbell

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929906002

• Abstract
• PDF (488.8 KB)
• References

Open Access

Finite element simulation of delamination process in composite materials 06003

Emilia Sabău, Cristian Vilău, Paul Bere and Adrian Popescu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929906003

• Abstract
• PDF (443.4 KB)
• References

Open Access

Improving the laser engraving quality of padpainted and spray-painted mechatronic devices 06004

Ion Cristian Braga, Razvan Udroiu and Anisor Nedelcu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929906004

• Abstract
• PDF (588.0 KB)
• References

Open Access

Experimental research regarding carbon fiber/epoxy material manufactured by autoclave process 06005

Paul Bere, Emilia Sabău, Cristian Dudescu, Calin Neamtu and Marius Fărtan

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929906005

• Abstract
• PDF (530.3 KB)
• References

Open Access

Study on the design and execution of a short fiber reinforced polyamide part 06006

Vlad Bocăneț, Adrian Popescu, Cristina Fenișer and Iulian Tamba

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929906006

• Abstract
• PDF (730.8 KB)
• References

Open Access

Mechanical and structural properties of composites made from recycled and virgin polyethylene terephthalate (PET) and metal chip or mesh wire 06007

Mircea Aurelian Antoniu Rusu, Sever-Adrian Radu, Catalin Moldovan, Codruta Sarosi, Ionela Amalia Mazilu (Moldovan) and Laura Monica Rusu

Published online: 02 December 2019

DOI: https://doi.org/10.1051/matecconf/201929906007

• Abstract
• PDF (547.5 KB)
• References