MATEC Web Conf.
Volume 298, 2019International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2019)
|Number of page(s)||6|
|Published online||18 November 2019|
Thermal stability of the carbon fibers with SiO2 coating
Ufa Institute of Chemistry UFRS RAS, 450054, Ufa, Russia
2 Ufa State Aviation Technical University, 450008, Ufa, Russia
3 Institute of Solid State Physics, 142432, Chernogolovka, Russia
* Corresponding author: email@example.com
This paper presents the results of a study of silicon dioxide coating deposited on the surface of carbon fiber by the sol-gel method. The effect of the viscosity of the prepared sol-gel solution and the oxidizing properties at elevated temperatures obtained by SiO2 coatings were studied. It was found that the kinematic viscosity of the sol-gel solution does not change for 72 hours. An increase in viscosity leads to the formation of colloidal particles, which degrades the quality of the coatings.Studies have shown that in the temperature range 600-800 °C, the quality of uncoated fibers degrade, but the SiO2 coating well protects the fiber surface and significantly slows down the rate of destruction.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.