EDPS Account

Volume 297 (2019)

Free Access to the whole issue

MATEC Web of Conferences

Volume 297 (2019)

X International Scientific and Practical Conference “Innovations in Mechanical Engineering” (ISPCIME-2019)

Kemerovo, Russia, November 26-29, 2019
S. Vöth, N.C. Cuong, N. Van Hoan, R. Vavrek, F.I. Panteleenko and S. Popek (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 13 November 2019

PDF (61.5 KB)

Innovative Technological Processes of the Machine Parts Production, Assembly and Procuring Production

Open Access

Definition of the Parameters of Surface Layer Based on Functionality of Parts 01001

Alexander Kleptsov and Lily Kleptsova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701001

Open Access

The Mass Transfer Intensification of Combined Treatment Products 01002

Oleg Skrygin, Vladislav Smolentsev and Anton Schednov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701002

Open Access

Zinc Coating Obtained in the Result of the Mechanochemical Effects in Vibrodynamic the Setups of Various Types 01003

Vladimir Ivanov, Sergey Popov, Nikolay Dontsov and Dieudonné Essola

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701003

Open Access

Electric Arc Surfacing of Defective Plots of Rails in the Area of Electrocontact Welded Joint 01004

Dmitry Nezhivlyak, Andrey Nezhivlyak and Maria Grechneva

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701004

Open Access

Study of the Assembly Manufacturing Automated Traceability System Identification Tools 01005

Vladimir Nosenko, Aleksei Silaev, Stepan Efremkin and Sergei Grednikov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701005

Open Access

Forming Small Diameter Holes in Tungsten – Cobalt Alloys 01006

Svetlana Vasilevskaya, Konstantin Rakhimyanov and Alexandra Ukraintseva

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701006

Open Access

Determining the processing modes of the low carbon steel by high-precision plasma cutting based on dimensionless complexes 01007

Aleksandr Loktionov, Nadezhda Gaar and and Аndrey Rakhimyanov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701007

Open Access

Activation of Electrochemical Piercing of Small Diameter Holes by Implementing High-Voltage Pulses in the Inter-Electrode Gap 01008

Kharis Rakhimyanov and Svetlana Vasilevskaya

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701008

Open Access

Boring a Discontinuous Surface: the Choice of Technological Modes 01009

Alexander Firsov, Alexander Qvcharenko, Alexander Romashev, Vitaly Smirnov and Aleksey Kamardin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701009

Open Access

Milling of Thin Walled Components from Aluminum Alloys by Considering the Conditions of Rigidity and Automation Assignment Elements of a Cutting Mode on CNC Machines 01010

Michail Nazarov and Evgeny Kiselev

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701010

Open Access

Study of the Efficiency of Ultrasonic Turning of Heat-Resistant Alloys with Tools from Mineral Ceramics 01011

Nguyen Khanh Toan and Nikolay Mezin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701011

Open Access

Zinc Coating Obtained in the Result of the Mechanochemical Effects in Vibrodynamic the Setups of Various Types 01012

Vladimir Ivanov, Sergey Popov, Nikolay Dontsov and Dieudonné Essola

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929701012

Processing Equipment and Digitalization of Machine-Building Productions

Open Access

Sensor Platform for Data Management Services in the European Tool Making Industry 02001

Pavel Vitliemov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929702001

Open Access

Object Model of Technical Solutions for Designing a Locomotive Train 02002

Dmitry Antipin, Vladimir Vorobiev and Denis Bondarenko

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929702002

Open Access

Investigation of the Dynamic Characteristics of the Manipulator of the Industrial Robot Technology 02003

Victor Butenko, Irina Davidova, Philipp Pastukhov and Tatyana Bagdasaryan

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929702003

Open Access

Processing Equipment on the Basis of Operative Parts in the Form of Screw Rotors With Profiled Perimeter 02004

Valery Lebedev, Georgy Serga, Lidianna Chunakhova and Mikhail Selemenev

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929702004

Open Access

Research of High-Speed Machining With Disk Cutters 02005

Andrey Markov, Mikhail Andreev, Aleksey Shityuk and Norbert Sczygiol

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929702005

Open Access

Linear Synchronous Motor Model 02006

Ilya Syrkin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929702006

Open Access

Unification of Design Decisions for Elements of Products Described by Structured Multiple Modules 02007

Boris Bazrov, Mikhail Kheifetz and Nikolay Popok

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929702007

Open Access

Mobile Processing of Pipeline Assembly Units 02008

Sergey Safonov, Vladislav Smolentsev and Yana Smolentseva

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929702008

Open Access

Forming a regular surface topography of a cylindrical part using oscillating ironing 02009

Semen Zaydess, Nguen Van Hin and Igor Bobrovskij

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929702009

Mining Engineering

Open Access

Development of the instrumentation system for gas-and-diesel fuelled BelAZ dump truck 03001

Sergey Azikhanov, Aleksandr Bogomolov, Georgiy Dubov and Sergey Nokhrin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929703001

Open Access

Development of Technical Requirements for On-Board Cryogenic Fuel Systems of Belaz Dump Trucks 03002

Georgiy Dubov, Dmitriy Trukhmanov, Sergey Nokhrin and Aleksey Sergel

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929703002

Open Access

The Step Feed Mechanisms For Auger Machines 03003

Leonid Mametyev, Oleg Lyubimov and Yuri Drozdenko

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929703003

Open Access

The Kinematic Analysis of the Screw Conveyor Vibration Exciter 03004

Dmitriy Kobylyansky and Viacheslav Gogolin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929703004

Open Access

Experimental Studies of Drilling Tools Magnetic Catchers with the Parallel Connection of Permanent Magnets 03005

Mikhail. Kobylyansky, Aleksey Ermolaev and Dmitriy Kobylyansky

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929703005

Open Access

Development of Innovative Methods for the Assessment of the Technical Condition of the Gearboxes of the Mine Belt Conveyors in the Parameters of the Lubricating Oil 03006

Mariya Mamaeva and Evgeniy Kuzin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929703006

Open Access

Justification of the Disk Tool Application for Working Bodies of Mining Machines 03007

Alexey Khoreshok, Leonid Mametyev, Valery Nesterov, Aleksandre Tsekhin and Andrey Borisov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929703007

Open Access

Unitized Attachment Points of a Disk Tool for the Working Bodies of Shearers and Tunnelling Machines 03008

Alexey Khoreshok, Leonid Mametyev, Valery Nesterov, Aleksandre Tsekhin and Andrey Borisov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929703008

Nanotechnologies and Materials Science in Mechanical Engineering

Open Access

Development and Investigation of The Production Process of the Aluminum Matrix Composition Mechanically Alloyed With Single-Walled Carbon Nanotubes and the Composition Material Made of it 04001

Nikolai Vetkasov, Anatoliy Kapustin and Valeriy Sapunov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929704001

Open Access

Selection of Non-Magnetic Fraction from the Slime Wastes of Metal Production in the Electromagnetic Field 04002

Yuri Vernigorov, Valery Lebedev and Lidianna Chunakhova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929704002

Open Access

Efficiency Estimation of Energy Introduction of a Ultrasound Field Into the Zone of Drilling of Complex Packages From Composite Materials and Titanium 04003

Evgeniy Kiselev, Kirill Savelev and Oleg Krupennikov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929704003

Open Access

Influence of the Initial State of Samples From Steel 20 on the Structural-Phase Condition to the Stable Zone Localization of Macrodeformation 04004

Nikolai Ababkov, Alexander Smirnov, Vladimir Danilov, Natalia Popova, Elena Nikonenko and Nina Koneva

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929704004

Open Access

Investigation of Electrochemical Dissolving the Amorphous and Nanocrystal Alloys by a Rotating Disk Electrode 04005

Konstantin Rakhimyanov, Maria Ivanova and Andrey Rakhimyanov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929704005

Open Access

The Effect of Vibro-Finishing Treatment on The Porosity of the Surface Layer of Powder Metallurgy Products 04006

Yuriy Ankudimov, Irina Sadovaya, Dieudonne Essola and Tatyana Bagdasaryan

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929704006

Open Access

Mechanisms of technical ceramic density adjusting 04007

Fedor Panteleyenko, Andrzej Kuczumow, Jan Sieniawski, Katerina Panteleyenko, Valeri Shmuradko and Vladimir Korotin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929704007

The Strengthening Technologies and Functional Coverings

Open Access

The Metal Surface Layer Mechanical Condition Transformation in Machining Processes 05001

Valeriy Blumenstein and Maxim Makhalov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705001

Open Access

Estimates of Metal Deformability 05002

Albina Zharmukhambetova and Svetlana Barannikova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705002

Open Access

The Study of Multiradius Roller Running Process 05003

Andrey Krechetov and Kristina Mitrofanova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705003

Open Access

Expanding Technological Capabilities of The Combined Hardening of Steel by Deformation 05004

Andrei Kirichek, Oleg Fedonin, Dmitry Solovyov and Svetlana Fedonina

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705004

Open Access

Ultrasonic Surface Hardening of Low Carbon Steels and Non-Ferrous Alloys 05005

Kharis Rakhimyanov, Viktor Gileta and Artem Samul

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705005

Open Access

Features of Creation of Surface Layer Mechanical Condition Parameters in Orthogonal Cutting 05006

Valeriy Blumenstein and Konstantin Petrenko

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705006

Open Access

Simulation of multi-contact wave strain hardening 05007

Andrey Kirichek, Sergey Barinov and Aleksandr Yashin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705007

Open Access

Automation of Operations Design for Complex-Shaped Surfaces Processing 05008

Margarita Markova, Andrey Markov, Aleksandr Balashov and Norbert Sczygiol

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705008

Open Access

Perspectives of Using Ultrasonic surface hardening in Machine Part Manufacturing 05009

Yulia Semenova and Semen Mazhuga

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705009

Open Access

Influence of the Method of Strengthening the Surface of Parts on Acoustic Characteristics 05010

Elena Levashova, Nikolai Ababkov and Maksim Pimonov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705010

Open Access

New Boron-Containing Materials for Surface Hardening 05011

Fedor Panteleyenko, Oleg Ostanin, Katerina Panteleyenko and Grigory Petrishin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705011

Open Access

Investigation of the influence of the geometrical dimensions of the striker on the efficiency of energy transfer of shock pulses during wave strain hardening 05012

Andrey Kirichek, Sergey Barinov and Aleksandr Yashin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929705012

Arrangement of Machine-Building Production and Personnel Training

Open Access

Factors for Development of the Educational and Professional Qualification Profile of the Human Resources in the Machine Building Sector in Bulgaria 06001

Mariana Petrova, Milena Tepavicharova and Lyudmila Dikova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706001

Open Access

Scientific and Technical Translation Training of Non-Linguistic University Students in E-Learning Environment 06002

Inna Gubanova and Anastasia Shirokolobova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706002

Open Access

Development of Mechanical Engineering in Knowledge Economy: Search for New Business Model 06003

Evgeny Zhernov, Evgenia Nekhoda and Roberto Bruni

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706003

Open Access

The “Road Map” of the Potential Development Assessment of the Component Machine Building in the Single-Industry Region 06004

Svetlana Kazachenko, Svetlana Kulay, Evgeniy Pudov and Evgeniy Shvakov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706004

Open Access

Professional Identification of a Specialist According to the Factor of His Psychological Type of Personality 06005

Anna Morozova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706005

Open Access

Educated and Competent Staff as Important Factor of Innovation Development of Machine-Building and Metalworking Industry in Latvia 06006

Jelena Lukjanova, Olena Sushchenko and Oleksandr Zyma

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706006

Open Access

Engineering Students English Teaching in E-Learning Environment 06007

Natalia Dolgova, Julia Larionova and Anastasia Shirokolobova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706007

Open Access

Integrating the Innovation Management Methodology Into the Existing Quality Management System of a Machine-Building Enterprise 06008

Vyacheslav Miroshnikov, Anna Morozova and Tatyana Svetlichnaya

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706008

Open Access

Improvement of Human Resource Management in the Quality Management System of the Enterprise 06009

Tatyana Mozhaeva

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706009

Open Access

The Quality Management System of Additional Professional Education in Higher Educational Institution on the Basis of a Standard Quality System 06010

Albert Simkin, Tatyana Mozhaeva and Alexander Proskurin

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706010

Open Access

Managing Interdisciplinary Links in the Educational Environment of Technical Colleges 06011

Alsu Kamaleeva, Natalya Nozdrina and Suriya Gilmanshina

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706011

Open Access

Theoretical And Methodological Basis Of Organizing Technical College Didactic Administration 06012

Alsu Kamaleeva, Natalya Nozdrina and Suriya Gilmanshina

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706012

Open Access

CRM Systems Management of Metallurgical Companies in Kazakhstan Based on the TRI * M System Methodology 06013

Arman Islamgaleyev

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706013

Open Access

Research on the Effectiveness of Modelling of Autonomous Flight System for Monitoring Agricultural and Industrial Sites 06014

Nayden Nenkov and Nedyalko Domitrov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706014

Open Access

Economic and management analysis of the impact of human capital on the development of machinery-building in Bulgaria 06015

Mariana Petrova, Milena Tepavicharova and Lyudmila Dikova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929706015

Innovative Management in Modern Conditions

Open Access

Applying Selected Quality Management Tools to Creation the Ecological Quality of Manufacturing Processes and Products 07001

Stanisław Popek and Adam Popek

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929707001

Open Access

Managing Organizational Open Innovation Capability in a Knowledge-Intensive Business Environment 07002

Yuliia Lazarenko, Olga Garafonova, Vyktoriia Marhasova, Nataliia Tkalenko and Svetlana Grigashkina

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929707002

Open Access

Best Practices Application in the Development of Industry in Russia 07003

Alexander Demidenko, Anastasia Kramar, Igor Demidenko and Alexander Demidenko

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929707003

Open Access

Integration Processes In Russia Engineering: Condition For Business Continuity 07004

Ekaterina Strizhakova, Dmitry Strizhakov and Igor Simontsev

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929707004

Open Access

Expert Evaluation of Ecological and Economic Risks of Implementing Engineering Innovations by Coal-Mining Enterprises Based on Fuzzy Logic 07005

Elena Raevskaya, Alexander Pimonov and Vladimir Mihailov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929707005

Open Access

Organization of Personnel Training in the HR-Management System at Machine-Building Enterprises 07006

Olena Sushchenko and Dariya Basyuk

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929707006

Open Access

The role of health tourism in reducing the number of occupational diseases and accidents in the mechanical engineering and metalworking sectors in Latvia 07007

Jelena Lukjanova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929707007

Open Access

Formation of effective mechanism of pairwise interaction of regional innovation subsystem subjects in the conditions of spatial transformation 07008

Natalya Petrukhina

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929707008

Industry 4.0: Key Factors in the Development of Mechanical Engineering

Open Access

Topsis Technique in Self-Government – Case Study of Košice Region 08001

Roman Vavrek and Ryszard Pukala

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929708001

Open Access

Start-Ups as One of the Elements Triggering the Development of Industry 4.0 08002

Ryszard Pukala

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929708002

Open Access

Network Interaction of Science, Education and Production 08003

Baurzhan Tolysbayev, Talgat Uteubayev and Gulnur Amirova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929708003

Open Access

The place of machine parts production in the restructuring Bulgarian industry 08004

Aneta Deneva

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929708004

Open Access

Incentives for Promoting Innovation in Engineering 08005

Tatyana Odinokova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929708005

Processes Abrasive Machining, Abrasive Tools and Materials

Open Access

Technology to Increase Hydrocarbon Wear Resistance of Friction Units of Hydrogen Aggregates 09001

Mikhail Shalygin and Sergei Kuznetsov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929709001

Open Access

Mechanism of Chip Formation Process at Grinding 09002

Vyacheslav Shumyacher, Sergey Kryukov, Olga Kulik and Xavier Kennedy

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929709002

Open Access

Materials Grindability 09003

Vyacheslav Shumyacher, Sergey Kryukov, Olga Kulik and Xavier Kennedy

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929709003

Open Access

Effect of the Grain Shape on Abrasive Tool Performance 09004

Ivan Shepelev, Sergey Kryukov and Natalya Baidakova

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929709004

Open Access

The Influence of the Formulation Components and the Mixing Technology on Physical and Mechanical Properties of Abrasive Wheel 09005

Andrey Romanenko, Dmitry Shatko and Pavel Strelnikov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929709005

Open Access

The Influence of Tthe Grinding Grains Shape and Orientation on Performance of Coated Abrasive Tools 09006

Dmitry Shatko, Vladimir Lyukshin and Pavel Strelnikov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929709006

Open Access

Theoretical-Probability Model of Metal Removal During Magnetic-Abrasive Treatment 09007

Alexey Ikonnikov and Sergey Leonov

Published online: 13 November 2019

DOI: https://doi.org/10.1051/matecconf/201929709007