Issue |
MATEC Web Conf.
Volume 298, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00117 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/matecconf/201929800117 | |
Published online | 18 November 2019 |
The providing durability of the movable square-sided spline joints by electromechanical treatment of the working surfaces
1
Federal State Budgetary Educational Institution of Higher Education Ulyanovsk State Agrarian University, Ulyanovsk, Russian Federation
2
Federal State Budgetary Educational Institution of Higher Education Bauman Moscow State Technical University, Moscow, Russian Federation
* Corresponding author: alvi.mor@mail.ru
The article deals with the operating conditions and causes of loss of performance of movable involute splines joints. In order to ensure the durability of the movable involute splines joints, an effective method of hardening the working surfaces of the splined hub by electromechanical treatment is proposed. The influence of the current on the change of microstructure and microhardness in the electromechanical processing of the working surfaces of the spline bushing was determined. The obtained results of the comparative wear testing of samples involute splines joints depending on the time of testing. It is established that the use of electromechanical processing of the working surfaces of involute splines joints allows reducing the time of their running-in and increasing the wear resistance of the movable joints up to 2 ... 2.5 times.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.