| Issue |
MATEC Web Conf.
Volume 298, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2019)
|
|
|---|---|---|
| Article Number | 00103 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/matecconf/201929800103 | |
| Published online | 18 November 2019 | |
Investigation of the process of abrasive waterjet cutting of steels based on numerical simulation
Arzamas Politechnical Institute the branch of Nizhniy Novgorod State Technical University named after R.E. Alekseev, Arzamas 607227, Russia
* Corresponding author: asm061@list.ru
The paper presents the results of 3D modeling the process of abrasive waterjet cutting of structural carbon and stainless steel workpiece. The Johnson-Cook model is selected as a material model. Distributions of stress fields in the cutting zone are obtained, as well as the dependences of depth of cut on jet traverse rate at jet velocities of 400 ... 700 m / s and dependences of cutting force on jet velocity at jet traverse rates of 100 ... 400 mm / min.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.