Open Access
Issue |
MATEC Web Conf.
Volume 298, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2019)
|
|
---|---|---|
Article Number | 00024 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/matecconf/201929800024 | |
Published online | 18 November 2019 |
- Zhonghe Y, Zhaohui L, Smith MR. Mechanisms and machine theory. Beijing, China: High Education Press, 2001. [Google Scholar]
- W. Liu, D. Ren, S. Usui, J. Wadell, T. D. Marusich, A gear cutting predictive model using the finite element method, J. CIRP. 8 (2013) pp. 51-56. [CrossRef] [Google Scholar]
- M. S. Ostapenko, D. S. Vasilega, Method of evaluation of quality of metal-cutting tool, J. Appl. Mech. Mater. 379 (2013) pp. 49-55. [CrossRef] [Google Scholar]
- E. V. Artamonov, D. V. Vasil’ev, Determining the optimal cutting speed in turning by composite cutters on the basis of the chip, J. Russ. Eng. Res. 34 (6) (2014) 404-405. [CrossRef] [Google Scholar]
- E. V. Artamonov, V. V. Kireev, Effectiveness of cutting by hods with replaceable hard-alloy plates, J. Russ. Eng. Res. 37 (7) (2014) pp. 473-474. [CrossRef] [Google Scholar]
- E. V. Artamonov, D. S. Vasilega, A. M. Tveryakov, Determining the maximum-performance temperature of hard-alloy cutting plates, J. Russ. Eng. Res. 34 (6) (2014) pp. 402-403. [CrossRef] [Google Scholar]
- D. S. Vasilega, M. S. Ostapenko, Efficiency improvement of metal lathing by using of an evaluation technique of abembly machine tools quality, Key Eng. Mater. 684 (2016) pp. 421-428. [CrossRef] [Google Scholar]
- M. S. Ostapenko, D. S. Vasilega, An industrial and sociological research of consumers requirements to a lathing tool, Key Eng. Mater. 684 (2016) pp. 429-434. [CrossRef] [Google Scholar]
- S. Steina, M. Lechthalera, S. Krassnitzera, K. Albrechta, A. Schindlerb, M. Arndta, Gear hobbing: A contribution to analogy testing and its wear mechanisms, J. CIRP. 1 (1) (2012) 220-225. [CrossRef] [Google Scholar]
- T. Tokawa, Y. Nishimura, Y. Nakamura, High productivity dry hobbing system, J. Mitsubishi Heavy Ind. 38 (1) (2001) pp. 27-31. [Google Scholar]
- B. Karpuschewski, H.-J. Knoche, M. Hipke, M. Beutner, High performance gear hobbing with powder-metallurgical high-speed-steel, J. CIRP. 1 (1) (2012) pp. 196-201. [CrossRef] [Google Scholar]
- G. Hyatt, M. Piber, N. Chaphalkar, O. Kleinhenz, M. Mori, A review of new strategies for gear production, J. CIRP. 14 (2014) pp. 72-76. [CrossRef] [Google Scholar]
- S. Xu and Y. Zhang, The Finite Element Modeling and Analysis of Involute Spur Gear, Advanced Materials Research, Vols. 516-517, pp. 673-677, 2012 [CrossRef] [Google Scholar]
- Kanber Bahattin. Analysis of Spur Gears by Coupling Finite and Boundary Element Methods. Mechanics based design of structures and machines, 2006 Volume 34, Issue 3, pp. 307-324. [CrossRef] [Google Scholar]
- Forte, Paola; Paoli, Alessandro; Razionale, Armando Viviano. A CAE approach for the stress analysis of gear models by 3D digital photoelasticity. International journal of interactive design and manufacturing, February 2015, Volume 9, Issue 1, pp. 31–43. [CrossRef] [Google Scholar]
- E. V. Artamonov, V. V. Kireev, The Compound Hob For Processing Gearbox Pinions Used In Hoist For Well Repairs, Appl. Mech. Mater. 770 (2015) pp. 469-475. [CrossRef] [Google Scholar]
- Artamonov E.V., Kireev V.V., Zyryanov V.A., An interlocking side mill with retrofittable carbide blades for processing of coarse-pitch tooth wheels, MATEC Web of Conferences 224. ICMTMTE – 2018. pp. 1-5. (2018) [CrossRef] [EDP Sciences] [Google Scholar]
- X. Dong C. Liao, Y.C. Shin, H.H. Zhang. Machinability improvement of gear hobbing via process simulation and tool wear predictions, October 2016, Volume 86, Issue 9–12, pp. 2771–2779. [Google Scholar]
- N. Srinivasan, M. S. Shunmugam. Limiting conditions in gear shaping for corrected involute gears, International Journal of Machine Tool Design and Research. Volume 23, Issue 4, 1983, pp. 227-235. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.