MATEC Web Conf.
Volume 298, 2019International Conference on Modern Trends in Manufacturing Technologies and Equipment: Mechanical Engineering and Materials Science (ICMTMTE 2019)
|Number of page(s)||9|
|Published online||18 November 2019|
To the question of constructing measuring devices based on fluxgate sensors
Department of Computer Control Systems of «MSTU «STANKIN», 127055 Moscow, Russia
* Corresponding author: firstname.lastname@example.org
The article discusses the issues of feeding fluxgates from compact, low-power generators built on AND-NOT logic elements. The frequency of such generators depends on the magnitude of the measured magnetic field strength. This gives reason to consider the possibility of using frequency as a useful signal. The article discusses the issues of feeding fluxgates from compact, low-power generators built on AND-NOT logic elements. The frequency of such generators depends on the magnitude of the measured magnetic field strength. This gives reason to consider the possibility of using frequency as a useful signal. The article proposes to use modulated rectangular voltage pulses, that is, pulses with high-frequency filling, to power a fluxgate. Then, under the influence of the measured magnetic field, the filling frequency changes, according to which the magnitude of the intensity is determined, and the frequency of the modulating voltage corresponding to the passport frequency of the fluxgate remains constant. In this case, it becomes possible to increase the deviation of the filling frequency due to the use of the released output winding of the fluxgate as an additional element of the generator. It was also experimentally established that in order to increase the voltage on the excitation winding of the fluxgate and, as a consequence, to increase its sensitivity, it is advisable to power through the D-trigger, which makes it possible to obtain bipolar voltage on the excitation winding. In addition, it is necessary to use resonance phenomena (at the frequency of the modeling voltage) in the serial circuit “connecting capacitors - excitation coil of a fluxgate”, which allows increasing the voltage on the excitation winding without increasing the voltage of the power source.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.