Volume 157 (2018)

Free Access to the whole issue

MATEC Web of Conferences

Volume 157 (2018)

Machine Modelling and Simulations 2017 (MMS 2017)

Sklené Teplice, Slovak Republic, September 5-8, 2017
M. Vasko, M. Handrik, L. Jakubovičová, P. Kopas, M. Blatnická, V. Baniari, O. Štalmach, A. Sapietová and M. Sága (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 14 March 2018

PDF (43.7 KB)

Open Access

About the conference

Published online: 14 March 2018

PDF (1.02 MB)

Open Access

Preface 00001

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815700001

PDF (84.8 KB)

Methods and systems in machine design

Open Access

Design of pallet, frame and chain of soldering station conveyor 01001

Mária Blatnická, Milan Sága and Miroslav Blatnický

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701001

Open Access

Structural design of soldering station chain conveyor working positions 01002

Miroslav Blatnický, Ján Dižo and Mária Blatnická

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701002

Open Access

The welded CNC machine tool frame 01003

Piotr Boral, Tadeusz Nieszporek and Rafał Gołębski

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701003

Open Access

Utilization of educational machine tool for training of technical diagnostics based on positioning performance 01004

Miroslav Cisar, Ivan Kuric, Nadezda Cubonova, Ivan Zajacko, Tomas Dodok and Anna Rudawska

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701004

Open Access

Analysis of residual stress in subsurface layers after precision hard machining of forging tools 01005

Andrej Czan, Jozef Holubjak, Igor Daniš, Juraj Martinček, Matej Mikloš, Robert Čep, Michal Hatala and Šarka Malotova

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701005

Open Access

Diagnosis of machine tool with using Renishaw ball-bar system 01006

Robert Čep, Šárka Malotová, Jiří Kratochvíl, Dana Stančeková, Andrej Czán and Tomáš Jakab

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701006

Open Access

The stability analysis of two-wheeled vehicle model 01007

Juraj Gerlici, Vladimir Sakhno, Alla Yefymenko, Vladimir Verbitskii, Alexandr Kravchenko and Kateryna Kravchenko

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701007

Open Access

Analysis of motion of the three wheeled mobile platform 01008

Anna Jaskot and Bogdan Posiadała

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701008

Open Access

Wear evaluation of elements of V-belt transmission with the application of optical microscope 01009

Piotr Krawiec, Konrad Waluś, Łukasz Warguła and Jarosław Adamiec

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701009

Open Access

The application of the optical system ATOS II for rapid prototyping methods of non-classical models of cogbelt pulleys 01010

Piotr Krawiec, Grzegorz Domek, Łukasz Warguła, Konrad Waluś and Jarosław Adamiec

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701010

Open Access

The material parameters for computational modeling of long-fibre composites with textile 01011

Jan Krmela and Vladimíra Krmelová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701011

Open Access

Computer simulation of the load test of an extrusion blow moulded product 01012

Michał Modławski, Jacek Nabiałek and Tomasz Jaruga

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701012

Open Access

The determination of wormwheel toothing surface 01013

Tadeusz Nieszporek, Rafał Gołębski and Piotr Boral

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701013

Open Access

Modeling and strength analysis of the prototype of the multi-tasking car trailer 01014

Bogdan Posiadała and Piotr Ladra

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701014

Open Access

Localization of delamination in composite test specimen 01015

Milan Sapieta, Peter Šulka and Martin Svoboda

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701015

Open Access

Monitoring the fatigue crack on the test specimen during the cyclic loading 01016

Milan Sapieta, Peter Šulka and Martin Svoboda

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701016

Open Access

Contribution to fatigue damage prediction of thin shell finite element models 01017

Milan Sága, Milan Vaško, Peter Kopas, Wiesława Piekarska, Tomasz Domański and Marcin Kubiak

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701017

Open Access

Shifted axis angular positioning mechanisms – unconventional use of exact constraint design 01018

Ksawery Szykiedans and Maciej Bujwan

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701018

Open Access

Investigation of the effects of the equivalent circuit parameters on induction motor torque using three different equivalent circuit models 01019

Mehmet Murat Tezcan, Asim Gökhan Yetgin, Ali Ihsan Canakoglu, Bariş Cevher, Mustafa Turan and Murat Ayaz

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701019

Open Access

Analysis and modeling of variables of the precise shredder’s pneumatic material transport’s system 01020

Krzysztof Tyszczuk, Kazimierz Peszyński, Adam Mroziński and Grzegorz Śmigielski

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701020

Open Access

The characteristics analysis of torque and rotation speed of working unit of branch grinder - introductory research 01021

Łukasz Warguła, Jarosław M. Adamiec, Konrad J. Waluś and Piotr Krawiec

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701021

Open Access

Analysis of the influence of the cutting edge geometry on parameters of the perforation process for conveyor and transmission belts 01022

Dominik Wojtkowiak, Krzysztof Talaśka, Ireneusz Malujda and Grzegorz Domek

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701022

Open Access

Inelastic damage using continuum damage mechanics in composite plate reinforced by unidirectional fibers 01023

Milan Žmindák and Martin Dudinský

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701023

Open Access

Sensitivity analysis overlaps of friction elements in cartridge seals 01024

Milan Žmindák and Miloš Falat

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815701024

Modelling and simulation, structural optimization

Open Access

Modelling of road traffic noise 02001

Andrzej Bąkowski, Leszek Radziszewski and Vladimir Dekys

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702001

Open Access

Determination the maximum load capacity of the welded structure of the transport carriage in operation 02002

Vladislav Baniari, Marián Handrik, Milan Vaško, Ján Kortiš and L’uboš Daniel

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702002

Open Access

Investigation of kinematic parameters of two nonconventional piston machines with wobble board 02003

Peter Baran, Pavol Šťastniak, Pavol Kukuča and Miloš Brezáni

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702003

Open Access

Effect of the pressed ceramic filters on the reoxidation process 02004

Marek Brůna, Dana Bolibruchová and Richard Pastirčák

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702004

Open Access

Flap casting of turbine engine optimization by numerical simulation 02005

Marek Brůna and Anna Remišová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702005

Open Access

The space distribution and transfer of positioning errors from actuators to the TCP point of parallel mechanism 02006

Vladimír Bulej, Ján Stanček, Ivan Kuric and Ivan Zajacko

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702006

Open Access

Numerical simulations of progressive hardening by using ABAQUS FEA software 02007

Tomasz Domański, Wiesława Piekarska, Marcin Kubiak, Zbigniew Saternus and Dorota Goszczyńska-Króliszewska

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702007

Open Access

A computer simulation of solidification taking into account the movement of the liquid phase 02008

Robert Dyja, Elżbieta Gawrońska and Andrzej Grosser

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702008

Open Access

Engineering calculations for complex geometric domains 02009

Elzbieta Gawronska, Robert Dyja, Andrzej Grosser and Jerzy Winczek

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702009

Open Access

Noise and temperature reduction in the contact of tribological elements during braking 02010

Juraj Gerlici, Mykola Gorbunov, Kateryna Kravchenko, Olga Prosvirova and Tomas Lack

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702010

Open Access

The role of inflow boundary layer thickness for numerical modelling of flow around bluff bodies of built-up areas 02011

Renata Gnatowska

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702011

Open Access

Design of a computational model for multi-body contact of deformable bodies in the flowing fluid 02012

Marián Handrik and Milan Vaško

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702012

Open Access

Design of a device to simulate environmental influences on the course of brake tests 02013

Jozef Harušinec, Andrej Suchánek, Mária Loulová and Peter Strážovec

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702013

Open Access

Discrete element method approach to modelling VPP dampers 02014

Pawel Chodkiewicz, Jakub Lengiewicz and Robert Zalewski

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702014

Open Access

Numerical analysis of stiffener for hybrid drive unite 02015

Lenka Jakubovičová, Milan Sága and Marián Handrik

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702015

Open Access

Experimental and computational comparative study of the specimens loaded by bending and torsion 02016

Lenka Jakubovičová, Milan Vaško, Milan Sága and Peter Kopas

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702016

Open Access

Cooperation of axisymmetric connection elements under dynamic load 02017

Andrzej Kołodziej, Marian Dudziak and Krzysztof Talaśka

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702017

Open Access

Lap weld joint modelling and simulation of welding in programme SYSWELD 02018

Radoslav Koňár, Miloš Mičian and Andrej Zrak

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702018

Open Access

Numerical modal analysis for vibration-damping properties of ductile cast 02019

Petra Kováčiková, Ján Vavro, Ján Vavro Jr. and Andrej Dubec

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702019

Open Access

Numerical modelling of caustics of solid state disk lasers 02020

Marcin Kubiak

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702020

Open Access

Computer simulations of thermal phenomena in surface heating process using the real distribution of Yb:YAG laser power 02021

Marcin Kubiak, Vladimír Dekýš, Tomasz Domański, Pavol Novák and Zbigniew Saternus

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702021

Open Access

Analysis of deformation and microstructure evolution during the hot deformation of titanium alloy 02022

Marcin Kukuryk and Jerzy Winczek

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702022

Open Access

Case study of technological problems arising from the use of new material, DOMEX steel sheet, on the components of the mower discs on the example of the production company SaMASZ Sp. Z o. o. 02023

Damian Kułak, Jerzy Jaroszewicz and Marcin Woronko

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702023

Open Access

Fatigue life prediction of mechanical structures under stochastic loading 02024

Bohuš Leitner and Lucia Figuli

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702024

Open Access

Numerical modelling of heat flows in the upper blast furnace of the electric arc furnace 02025

Richard Lenhard, Milan Malcho, Peter Ďurčanský and Katarina Kaduchová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702025

Open Access

Evaluation of the technical condition of medium-sized boilers 02026

Pavel Lošák, Tomáš Létal, Jiří Buzík and Martin Naď

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702026

Open Access

The use of CAD applications in the design of shredders for polymers 02027

Marek Macko, Krzysztof Tyszczuk, Grzegorz Śmigielski, Józef Flizikowski and Adam Mroziński

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702027

Open Access

Study of the prototype mechanism of height adjustment of the bed in hospital bed 02028

Ireneusz Malujda, Dominik Wilczyński, Krzysztof Talaśka, Dominik Wojtkowiak and Maciej Szulc

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702028

Open Access

Transformation of heat into mechanical energy by means of rotating systems 02029

Marian Mešina

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702029

Open Access

Finite element simulation of laser cutting process of steel sheet 02030

Jozef Meško, Andrej Zrak, Rastislav Nigrovič and Milan Žmindák

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702030

Open Access

Numerical research of biomechanical system with SMA prosthesis 02031

Andrzej Mitura and Rafal Rusinek

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702031

Open Access

Computer simulation of thermoforming process and its verification using a rapid tooling mould 02032

Michał Modławski and Tomasz Jaruga

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702032

Open Access

Thermal load non-uniformity estimation for superheater tube bundle damage evaluation 02033

Martin Naď, Zdeněk Jegla, Tomáš Létal, Pavel Lošák and Jiří Buzík

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702033

Open Access

Prediction of modal properties of circular disc with pre-stressed fields 02034

Milan Naď, Rastislav Ďuriš and Tibor Nánási

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702034

Open Access

Simulation of solidification during crystallization under pressure 02035

Richard Pastirčák, Marek Brůna and Dana Bolibruchová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702035

Open Access

Heat flow and heat transfer coefficient during crystallization under the pressure 02036

Richard Pastirčák, Ján Ščury and Tomáš Fecura

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702036

Open Access

Analysis of stress and deformation fields of shape complex beams 02037

Miroslav Pástor and Pavol Lengvarský

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702037

Open Access

Numerical simulation of blanking process 02038

Peter Pecháč and Milan Sága

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702038

Open Access

Numerical analysis of laser welding with consideration analytical methods of determining phase transformations and mechanical properties of welded joint 02039

Wiesława Piekarska, Dorota Goszczyńska-Króliszewska, Zbigniew Saternus, Tomasz Domański and Marcin Kubiak

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702039

Open Access

Computer analysis of thermal phenomena and deformation in lap joint welded by a laser beam 02040

Wiesława Piekarska, Alžbeta Sapietová, Zbigniew Saternus and Marcin Kubiak

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702040

Open Access

Application of analytical methods for determination of hardness distribution in welded joint made of S1100QL steel 02041

Wiesława Piekarska, Milan Sága, Dorota Goszczyńska-Króliszewska, Tomasz Domański and Peter Kopas

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702041

Open Access

Missing values reconstruction in sound level monitoring station by means of intelligent computing 02042

Leszek Radziszewski, Michał Kekez and Alžbeta Sapietová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702042

Open Access

Numerical estimation of temperature field in a laser welded butt joint made of dissimilar materials 02043

Zbigniew Saternus, Wiesława Piekarska, Marcin Kubiak, Tomasz Domański and Dorota Goszczyńska-Króliszewska

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702043

Open Access

Analysis of the influence of the pipe’s wall thickness on the corrugation of the surface during inductive bending of pipes 02044

Milan Sága, Marián Handrik, Peter Kopas and Maroš Tropp

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702044

Open Access

Forced convection and heat transfer around a bounded cylinder 02045

Blanka Skočilasová, Jan Skočilas and Josef Soukup

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702045

Open Access

The effect of restraints type on the generated stresses in gantry crane beam 02046

Leszek Sowa, Wiesława Piekarska, Tomasz Skrzypczak and Paweł Kwiatoń

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702046

Open Access

The effect of the gantry crane beam cross section on the level of generated stresses 02047

Leszek Sowa, Tomasz Skrzypczak and Paweł Kwiatoń

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702047

Open Access

Analysis of the distribution of temperature fields in the braked railway wheel 02048

Andrej Suchánek, Jozef Harušinec, Mária Loulová and Peter Strážovec

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702048

Open Access

Stimulation of nerve endings via medical device 02049

Antonin Svoboda and Josef Soukup

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702049

Open Access

Polyurethane foam behaviour during impact 02050

Stanislav Špirk, Michal Křížek and Štěpán Jeníček

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702050

Open Access

Computer aided structural analysis of newly developed railway bogie frame 02051

Pavol Šťastniak, Marián Moravčík, Peter Baran and Lukáš Smetanka

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702051

Open Access

Modelling mechanical properties of the multilayer composite materials with the polyamide core 02052

Krzysztof Talaśka and Dominik Wojtkowiak

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702052

Open Access

Selection of optimal solution heat treatment of the casting cylinder heads 02053

Eva Tillová, Mária Chalupová, Lenka Kuchariková, Juraj Belan and Denisa Závodská

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702053

Open Access

Parallelization of computational algorithms for optimization problems with high time consumption 02054

Milan Vaško, Marián Handrik, Alžbeta Sapietová and Jana Handriková

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702054

Open Access

The damage analysis of the reinforced concrete beam and the prestressed reinforced concrete beam 02055

Milan Vaško, Marián Handrik, Matej Rác, Vladislav Baniari, Ján Kortiš and Ľuboš Daniel

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702055

Open Access

Analytical model of stress field in submerged arc welding butt joint with thorough penetration 02056

Jerzy Winczek, Ryszard Parkitny, Krzysztof Makles and Marcin Kukuryk

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702056

Open Access

Identifying the cause of cutting tool failure by using simulation software 02057

Andrej Zrak and Radoslav Koňár

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702057

Open Access

Simulation of sound transmission through the porous material, determining the parameters of acoustic absorption and sound reduction 02058

Peter Zvolenský, Juraj Grenčík, Ľubomír Kašiar and Vladimír Stuchlý

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815702058

Machine dynamics and multibody systems simulations

Open Access

Passive safety system for small unmanned aerial vehicles 03001

Piotr Bartkowski and Robert Zalewski

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703001

Open Access

Analysis of inertial amplification mechanism with smart spring-damper for attenuation of beam vibrations 03002

Mateusz Barys and Robert Zalewski

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703002

Open Access

Electromagnetic angular positioner based on DC micromotor 03003

Maciej Bodnicki, Jakub Wierciak, Wojciech Credo, Karol Bagiński and Leszek Wawrzyniuk

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703003

Open Access

Assessment of a rail vehicle running with the damaged wheel on a ride comfort for passengers 03004

Ján Dižo, Miroslav Blatnický, Stasys Steišūnas and Blanka Skočilasová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703004

Open Access

Free vibration analysis of a DST-0285 truck crane considering changes in the system load configuration 03005

Tomasz Geisler

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703005

Open Access

Calculated estimation of railway wheels equivalent conicity influence on critical speed of railway passenger car 03006

Juraj Gerlici, Rostyslav Domin, Ganna Cherniak and Tomáš Lack

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703006

Open Access

The development of diagnostics methodological principles of the railway rolling stock on the basis of the analysis of dynamic vibration processes of the rail 03007

Juraj Gerlici, Olena Nozhenko, Ganna Cherniak, Mykola Gorbunov, Rostyslav Domin and Tomáš Lack

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703007

Open Access

Comparation of the impact of selected technical gases on properties of a pneumatic flexible coupling 03008

Robert Grega, Jozef Krajňák and Daniela Harachová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703008

Open Access

Car body and bogie connection modification for track curves passability improvement 03009

Vladimír Hauser, Olena S. Nozhenko, Kateryna O. Kravchenko, Mária Loulová, Juraj Gerlici and Tomáš Lack

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703009

Open Access

Innovative wheel tread design aimed to tramcar-track interaction improvement when passing curves of a small radius 03010

Vladimír Hauser, Olena S. Nozhenko, Kateryna O. Kravchenko, Mária Loulová, Juraj Gerlici and Tomáš Lack

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703010

Open Access

Universal compact lower limb turning module intended for use in orthotic robots 03011

Mateusz Janowski, Danuta Jasińska-Choromańska, Dymitr Osiński and Marcin Zaczyk

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703011

Open Access

Analysis of transverse vibration and stability issues of discrete-continuous elastic systems with nonlinearly variable parameters 03012

Jerzy Jaroszewicz and Łukasz Dragun

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703012

Open Access

The assessment of the integration methods for the rail vehicle ride dynamics solution 03013

Tomáš Lack and Juraj Gerlici

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703013

Open Access

Y25 freight car bogie models properties analysis by means of computer simulations 03014

Tomáš Lack and Juraj Gerlici

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703014

Open Access

Contribution to numerical study of vehicle vertical stochastic vibration 03015

Alžbeta Sapietová, Milan Sága, Dana Stančeková and Milan Sapieta

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703015

Open Access

Probability analysis of dynamical effects of axial piston hydraulic motor 03016

Alzbeta Sapietova, Vladimír Dekys, Milan Sapieta, Peter Sulka, Lukas Gajdos and Izabela Rojek

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703016

Open Access

Wear research of railway wheelset profile by using computer simulation 03017

Lukáš Smetanka, Pavol Št’astniak and Jozef Harušinec

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703017

Open Access

Analysis and synthesis parameters influencing to the effects of impact 03018

Peter Šulka, Alžbeta Sapietová, Vladimír Dekýš and Milan Sapieta

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703018

Open Access

Kinematic and dynamic analysis and distribution of stress for four-item mechanism 03019

Ján Vavro Jr., Ján Vavro, Petra Kováčiková and Juliána Vršková

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703019

Open Access

Kinematic and dynamic analysis and distribution of stress for six-item mechanism 03020

Ján Vavro Jr., Ján Vavro, Petra Kováčiková and Jakub Híreš

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815703020

Advanced industrial, automotive and green energy applications

Open Access

Timing belt in power transmission and conveying system 04001

Grzegorz Domek, Piotr Krawiec and Michał Wilczyński

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815704001

Open Access

Use of risk assessment methods in maintenance for more reliable rolling stock operation 04002

Juraj Grenčík, Roman Poprocký, Jana Galliková and Peter Volna

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815704002

Open Access

Design of stirling engine operating at low temperature difference 04003

Josef Sedlák, Adam Glváč and Andrej Czán

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815704003

Open Access

Improving the quality of cutting flat glass 04004

Martin Svoboda, Josef Soukup and Milan Sapieta

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815704004

Open Access

Method of controlling innovative articulation for articulated vehicle 04005

Mateusz Szumilas, Sergiusz Łuczak, Maciej Bodnicki, Marcin Stożek and Tomasz Załuski

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815704005

Experimental mechanics, identification and validation

Open Access

A concept of smart multiaxial impact damper made of vacuum packed particles 05001

Piotr Bartkowski and Robert Zalewski

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705001

Open Access

Analysis of the porous bone-implant fixation – experimental verification of numerical model 05002

Maciej Berdychowski and Janusz Mielniczuk

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705002

Open Access

The contribution to the modal analysis using an infrared camera 05003

Vladimír Dekys, Zuzana Stankovicova, Pavol Novak and Ondrej Stalmach

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705003

Open Access

Examples of modern methods of measuring deformations 05004

Tomasz Domański

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705004

Open Access

Experimental research of vehicle traction properties for reconstruction of traffic accidents 05005

Marian Dudziak, Andrzej Lewandowski and Michał Śledziński

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705005

Open Access

Influence of geometrical parameters of convergent sleeve on the value of limit stress 05006

Jan Górecki, Ireneusz Malujda, Krzysztof Talaśka, Dominik Wilczyński and Dominik Wojtkowiak

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705006

Open Access

Experimental investigation of properties of GFRP foam cored sandwich joints 05007

Jana Gulanová, Matúš Margetin, Papa-Birame Gning and Andrej Chríbik

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705007

Open Access

A new accelerated technique for validation of cyclic plasticity models 05008

Radim Halama, Petr Gál, Zbyněk Paška and Josef Sedlák

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705008

Open Access

Use of the BOINC system for distributed data collection in the “Internet of Things” 05009

Marián Handrik, Jana Handriková and Lenka Jakubovičová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705009

Open Access

Studying of cutting conditions when hard turning and their impact on integrity of shaped-complex surfaces 05010

Jozef Holubjak, Jozef Pilc, Tatiana Czanova, Pavol Martikan, Dusan Mital and Jozef Mrazik

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705010

Open Access

Influence of structure sensitising of the AlSi 316Ti austenitic stainless steel on the ultra-high cycle fatigue properties 05011

Michal Jambor, František Nový, Otakar Bokůvka, Libor Trško and Monika Oravcová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705011

Open Access

Determination of the influence of adherent surface on the adhesive bond strength 05012

Tomas Kalina, Frantisek Sedlacek and Jan Krystek

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705012

Open Access

Low-cycle fatigue behaviour of laser welded high-strength steel DOMEX 700 MC 05013

Peter Kopas, Milan Sága, František Nový and Bohuš Leitner

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705013

Open Access

Tensile and bending test of carbon/epoxy and carbon/geopolymer composites after temperature conditioning 05014

Jan Krystek, Vladislav Laš, Vilém Pompe and Pavlína Hájková

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705014

Open Access

Development of methods for performing the maximum voluntary contraction (MVC) test 05015

Mateusz Kukla, Bartosz Wieczorek and Łukasz Warguła

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705015

Open Access

Utility of an unitary-shredding method to evaluate the conditions and selection of constructional features during grinding 05016

Marek Macko, Krzysztof Tyszczuk, Grzegorz Śmigielski and Adam Mroziński

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705016

Open Access

Experimental casting of forging ingots from model material 05017

Ján Moravec, Peter Kopas, Lenka Jakubovičová and Bohuš Leitner

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705017

Open Access

Analysis of the material configurations and influence on the dynamic response 05018

Zuzana Murčinková and Michal Halapi

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705018

Open Access

Influence of microscopic casting defects on fatigue endurance of ductile cast iron 05019

František Nový, Peter Kopas, Otakar Bokůvka, Michal Jambor and Libor Trško

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705019

Open Access

Vibration of the steel frame of the primary sand classifier 05020

Josef Soukup, Blanka Skočilasová and Jan Skočilas

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705020

Open Access

Fatigue limit estimation using IR camera 05021

Zuzana Stankovičová, Vladimír Dekýš, Milan Uhríčik, Pavol Novák and Bohumír Strnadel

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705021

Open Access

The experimental measurement of the tyre casing defects for the freight vehicles at the dynamic loading 05022

Ján Vavro, Ján Vavro Jr., Petra Kováčiková and Jakub Híreš

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705022

Open Access

Measurement system for special surface mapping using miniature displacement sensors 05023

Martyna Zowade and Maciej Bodnicki

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815705023

Modelling of structural materials, composites and nanomaterials

Open Access

Experimental testing of PLA biodegradable thermoplastic in the frame of 3D printing FDM technology 06001

Juraj Beniak, Peter Križan, Miloš Matúš and Michal Šajgalík

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815706001

Open Access

Buckling analysis of graphene nanosheets by the finite element method 06002

Jozef Bocko and Pavol Lengvarský

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815706002

Open Access

An alternative J₂ material model with isotropic hardening for coupled thermal-structural finite-strain elastoplastic analyses 06003

Ladislav Écsi, Pavel Élesztos and Roland Jančo

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815706003

Open Access

Analysis of torque cam mechanism 06004

Iryna Hren, Petr Hejma, Štefan Michna, Martin Svoboda and Josef Soukup

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815706004

Open Access

Material property determination of the lining layers of a versatile helmet 06005

Radek Kottner, Richard Hynek, Tomáš Mandys and Jan Bartošek

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815706005

Open Access

Calculation of stress in FGM beams 06006

Justín Murín, Juraj Hrabovský and Vladimír Kutiš

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815706006

Open Access

Numerical modelling of sandwich panels with a non-continuous soft core 06007

Jolanta Pozorska

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815706007

Open Access

Numerical modelling of the rigid polyurethane foam microstructure 06008

Zbigniew Pozorski

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815706008

Physical and chemical properties of materials

Open Access

The fractography analysis of IN718 alloy after three-point flexure fatigue test 07001

Juraj Belan, Alan Vaško, Lenka Kuchariková and Eva Tillová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707001

Open Access

Study of selected thermoplastics using dynamic mechanical analysis 07002

Marcel Kohutiar, Mariana Pajtášová, Róbert Janík, Iveta Papučová, Jana Pagáčová, Beáta Pecušová and Ivan Labaj

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707002

Open Access

Porosity formation and fatigue properties of AlSiCu cast alloy 07003

Lenka Kuchariková, Eva Tillová, Milan Uhríčik and Juraj Belan

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707003

Open Access

Study of new rubber to steel adhesive systems based on Co(II) and Cu(II) sulphides coats 07004

Ivan Labaj, Darina Ondrušová, Andrej Dubec, Mariana Pajtášová, Marcel Kohutiar and Beata Pecušová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707004

Open Access

Optical attributes influence on mechanical properties of laser cutted PMMA 07005

Jozef Meško and Rastislav Nigrovič

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707005

Open Access

Effect of bentonite modified by silane on rubber blends properties 07006

Zuzana Mičicová, Slavomíra Božeková, Mariana Pajtášová and Darina Ondrušová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707006

Open Access

Modification of alternative additives and their effect on the rubber properties 07007

Darina Ondrušová, Slavomíra Božeková, Lenka Buňová, Mariana Pajtášová, Ivan Labaj, Andrej Dubec and Juliána Vršková

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707007

Open Access

Temperature dependent measurement of internal damping of austenitic stainless steels 07008

Monika Oravcová, Peter Palček, Mária Chalupová and Milan Uhríčik

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707008

Open Access

Use of waste materials in rubber matrix 07009

Mariana Pajtášová, Zuzana Mičicová, Darina Ondrušová, Slavomíra Božeková, Róbert Janík, Beáta Pecušová and Lukáš Raník

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707009

Open Access

Study of clay minerals effect on curing characteristics of polymer blends and physical-mechanical properties of prepared vulcanizates 07010

Beáta Pecušová, Mariana Pajtášová, Zuzana Mičicová, Darina Ondrušová, Andrea Feriancová, Marcel Kohutiar and Ivan Labaj

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707010

Open Access

Structural changes of selected materials for glass industry after thermal loading 07011

Františka Pešlová, Mariana Janeková and Stanislav Krum

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707011

Open Access

Triaxial analysis of residual stress in surface layers after high feed machining using X-ray diffractometer 07012

Michal Sajgalik, Tatiana Czanova, Lucia Zauskova, Mario Drbul, Marek Sadilek and Jan Valicek

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707012

Open Access

The influence of the structure on the fatigue properties of aluminium alloys for the casting 07013

Milan Uhríčik, Peter Palček, Mária Chalupová and Martin Frkáň

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707013

Open Access

Study of the fatigue behaviour of synthetic nodular cast irons at low and high frequency cyclic loading 07014

Alan Vaško, Juraj Belan and Eva Tillová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707014

Open Access

Smart materials activation analysis on example of nickel and titanium alloys 07015

Bartosz Wieczorek, Mateusz Kukla, Łukasz Warguła, Konrad J. Waluś and Klaudia Wiesner

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707015

Open Access

Experimental research on biomass cutting process 07016

Dominik Wilczyński, Krzysztof Talaśka, Ireneusz Malujda and Piotr Jankowiak

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815707016

Theoretical and applied mathematics in engineering

Open Access

Numerical computation of the damping and stiffness coefficients of the classical and magnetorheological squeeze film damper 08001

Petr Ferfecki, Jaroslav Zapoměl, Michal Šofer, František Pochylý and Simona Fialová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708001

Open Access

Parametric oscillations of the mechanical systems 08002

Branislav Ftorek, Pavol Oršanský and Helena Šamajová

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708002

Open Access

Model calculations of posterior reliability indicators for the proposal of the maintenance system 08003

Jana Galliková, Vladimír Stuchlý, Roman Poprocký and Peter Volna

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708003

Open Access

Stability and vibrations control of a stepped beam using piezoelectric actuation 08004

Krzysztof Kuliński and Jacek Przybylski

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708004

Open Access

Novel algorithm for tilt measurements using MEMS accelerometers 08005

Sergiusz Łuczak

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708005

Open Access

Euler-Lagrange optimization of electric drives with DTM method 08006

Pavol Oršanský, Branislav Ftorek, Helena Šamajová and Ján Vittek

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708006

Open Access

Transmuted Weibull distribution and its applications 08007

Ivana Pobočíková, Zuzana Sedliačková and Mária Michalková

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708007

Open Access

Heat conduction in a composite sphere - the effect of fractional derivative order on temperature distribution 08008

Urszula Siedlecka and Stanisław Kukla

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708008

Open Access

Numerical modeling of the contact between three-dimensional regions with the use of FEM 08009

Tomasz Skrzypczak, Ewa Węgrzyn-Skrzypczak and Leszek Sowa

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708009

Open Access

Numerical modeling of heat flow between three-dimensional regions in contact problems 08010

Tomasz Skrzypczak and Ewa Węgrzyn-Skrzypczak

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708010

Open Access

Numerical solution of Rayleigh-Lamb frequency equation for real, imaginary and complex wavenumbers 08011

Michal Šofer, Petr Ferfecki and Pavel Šofer

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708011

Open Access

Application of the vibration method for damage identification of a beam with a variable cross-sectional area 08012

Izabela Zamorska, Dawid Cekus and Mateusz Miara

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708012

Open Access

Load of the slipper-swash plate kinematic pair of an axial piston pump 08013

Tadeusz Złoto and Konrad Kowalski

Published online: 14 March 2018

DOI: https://doi.org/10.1051/matecconf/201815708013