| Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
|---|---|---|
| Article Number | 02023 | |
| Number of page(s) | 11 | |
| Section | Modelling and simulation, structural optimization | |
| DOI | https://doi.org/10.1051/matecconf/201815702023 | |
| Published online | 14 March 2018 | |
Case study of technological problems arising from the use of new material, DOMEX steel sheet, on the components of the mower discs on the example of the production company SaMASZ Sp. Z o. o.
1
Enterprise SaMASZ Sp. Z o.o., 15-161 Białystok, ul. Grass 15, Poland
2
Bialystok Technical University, Department of Production Management, 16-001 Kleosin, ul. Father Tarasiuk 2, Poland
3
Graduate of Bialystok Technical University, Department of Production Management, 16-001 Kleosin, ul. Father Tarasiuk 2, Poland
* Corresponding author: damian.kulak@samasz.pl
The paper describes the improvement of technological process of knife holder production used in disc mowers at SaMASZ Sp. With o.o. The improvement was aimed at eliminating cracks in the press of a 500t crank press press crush that occurred after the Boron 27 starting material was changed to Domex MC 500 high strength steel. The technology of regeneration of claws with identified operational cracks and a stand for fatigue tests was also proposed. Defectoscopy and strength testing methods have been developed to verify that the structure of the regenerated material is free from cracks or micro cracks in the material.
Key words: knife holder / Boron 27 / Domex / fatigue tests / defectoscopic examination
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.