Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
---|---|---|
Article Number | 07004 | |
Number of page(s) | 10 | |
Section | Physical and chemical properties of materials | |
DOI | https://doi.org/10.1051/matecconf/201815707004 | |
Published online | 14 March 2018 |
Study of new rubber to steel adhesive systems based on Co(II) and Cu(II) sulphides coats
Alexander Dubček University of Trenčín, Faculty of Industrial Technologies in Púchov, I. Krasku 941/30, 020 01 Púchov, Slovak Republic
* Corresponding author: ivan.labaj@fpt.tnuni.sk
The presented paper deals with the preparation of new rubber to steel adhesive systems using the steel surface treatment with deposition of adhesive coats based on Co(II) and Cu(II) sulphides. Efficiency of new prepared adhesive systems containing Co(II) and Cu(II) sulphides has been compared with the efficiency of double layer adhesive system commonly used in industry. The chemical composition of prepared adhesive systems was determined using the EDX analysis. Scanning Electron Microscopy (SEM) was used for study of topography and microstructure of prepared rubber to steel adhesive systems (Co(II), Cu(II) sulphide, double layer adhesive system). For determination of adhesion strength between rubber blends and metal pieces with various adhesive systems deposited on these pieces, the test according to ASTM D429 standard relating to Rubber to metal adhesion, method A was used. For all test samples, the same type of rubber blend and the same curing conditions have been used.
Key words: Rubber blend / adhesive systems / cobalt sulphide / copper sulphide / double adhesive system
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.