Open Access
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
Article Number 02056
Number of page(s) 11
Section Modelling and simulation, structural optimization
Published online 14 March 2018
  1. R. N. S. Fassani, O. V. Trevisan, Analytical modeling of multipass welding process with distributed heat source. J. Braz. Soc. Mech. Sci. Eng. 25, 302-305 (2003) [CrossRef] [Google Scholar]
  2. A. Ghosh, N. Barman; H. Chattopadhyay, S. Hloch, A study of thermal behaviour during submerged arc welding. Stroj. Vest. J. Mech. Eng. 59, 333-338 (2013) [CrossRef] [Google Scholar]
  3. A. Franco, L. Romoli, A. Musacchio, Modelling for predicting seam geometry in laser beam welding of stainless steel. Int. J. Therm. Sci. 79, 194-205 (2014) [CrossRef] [Google Scholar]
  4. V. D. Fachinotti, A. A. Anca, A. Cardona, Analytical solutions of the thermal field induced by moving double-ellipsoidal and double elliptical heat sources in a semi-infinite body. Int. J. Num. Meth. Biomech. Eng. 27, 595-607 (2011) [CrossRef] [Google Scholar]
  5. T. Antonakakis, C. Maglioni, V. Vlachoudis, Closed form solutions of the heat diffusion equation with Gaussian source. Int. J. Heat Mass Transf. 62, 314-322 (2013) [CrossRef] [Google Scholar]
  6. S. Salimi, P. Bahemmat, M. Haghpanahi, A 3D transient analytical solution to the temperature field during dissimilar welding processes. Int. J. Mechn. Sci. 79, 66-74 (2014) [CrossRef] [Google Scholar]
  7. S. Joshi, C. Semetay, J. W. H. Price, H. F. Nied, Weld-induced residual stresses in a prototype dragline cluster and comparison with design codes. Thin Wall. Struct. 48, 89-102 (2010) [CrossRef] [Google Scholar]
  8. J. Hildebrand, I. Starcevic, F. Werner, H. Heinemann, G. Köhler, Numerical simulation of TIG-dressing of welded joints. Joint Int. Conf. Comput. Decision Making Civil Building Eng., Montreal, Canada, 1487-1496 (2006) [Google Scholar]
  9. M. M. Mahapatra, G. L. Datta, B. Pradhan, Three-dimensional finite element analysis to predict the effects of shielded metal arc welding process parameters on temperature distributions and weldment zones in butt and one-sided fillet welds. P. I. Mech. Eng. B J. Eng. 220, 837-845 (2006) [Google Scholar]
  10. S. Joshi, J. Hildebrand, A. S. Aloraier, T. Rabczuk, Characterization of materiał properties and heat source parameters in welding simulation of two overlapping beads on a substrate plate. Comp. Mater. Sci. 69, 559-565 (2013) [CrossRef] [Google Scholar]
  11. W. Piekarska, M. Kubiak, Three-dimensional model for numerical analysis of thermal phenomena in laser-arc hybrid welding process. Int. J. Heat Mass Tran. 54, 4966-4974 (2011) [CrossRef] [Google Scholar]
  12. A. Moarrefzadeh, Numerical simulation of workpiece thermal profile in Plasma Arc Cutting (PAC) Process. WSEAS Trans. Appl. Theor. Mech. 6 (4), 160-166 (2011) [Google Scholar]
  13. Y. Chen, Y. He, H. Chen, H. Zhang, S. Che, Effect of weave frequency and amplitude on temperature field in weaving welding process. Int. J. Adv. Manuf. Techn. 75, 803-813 (2014) [CrossRef] [Google Scholar]
  14. A. Sarkar, A. Datta, P. Dey, R. N. Rai, S. C. Saha A numerical approach for modelling thermal profiles and effects of process parameters on it in submerged arc welding of AISI 1518 grade steel. J. Therm. Eng. 1, Special Issue 3, No 6, 505 – 516 (2015) [Google Scholar]
  15. M. R. Nezamdost, M. R. Nekonie Esfahani, S. H. Hashemi, S. A. Mirbozorgi, Investigation of temperature and residual stresses field of submerged arc welding by finite element method and experiment. Int. J. Adv. Manuf. Technol. 87, 615-624 (2016) [CrossRef] [Google Scholar]
  16. Z. Murčinková, K. Vasilko, Thermo-physical aspects of chip machining. High Temp. - High Press. 45, 273-289 (2016) [Google Scholar]
  17. O. V. Berezshnaya, E. P. Gribkov, V. D. Kuznestov, Investigation of thermostressed state coating formation at electric contact surfacing of “Shaft” type parts. Adv. Mater. Sci. Eng. ID 6597317, 14, (2016) [Google Scholar]
  18. H. J. Jiang, H. L. Dai, Effect of laser processing on three dimensional thermodynamic analysis for HSLA rectangular steel plates. Int. J. Heat Mass Tran. 82, 98-108 (2015) [CrossRef] [Google Scholar]
  19. S. Feng, C, Huang, J. Wang, H. Zhu, P. Yao, An analytical model for the prediction of temperature distribution and evolution in hybrid laser-waterjet micro machining. Precis. Eng. 47, 33-45 (2017) [CrossRef] [Google Scholar]
  20. P. Novák; J. Meško; M. Žmindák, Finite element implementation of multi-pass fillet weld with phase changes. Manuf. Technol. 13 (1), 79-85 (2013) [Google Scholar]
  21. T. Kik, M. Slováček, B. Wyględacz, Numerical analysis of multipass T-joint welding and post welding heat treatment. Weld. Technol. Rev. 88 (5), 101-106 (2016) [Google Scholar]
  22. M. Patek, M. Mician, A. Sladek, D. Kadas, Numerical analysis of T-joint welding with different welding sequences. Manuf. Technol. 16 (1), 234-238 (2016) [Google Scholar]
  23. R. Konar, M. Mician, M. Patek, D. Kadas, Finite element modeling and numerical simulation of welding at the repair of gas pipelines with steel sleeve. Manuf. Technol. 16 (2), 360-365 (2016) [Google Scholar]
  24. R. Konar, M. Patek, M. Mician, Experimental measurements and numerical simulation of bridge construction welding at low temperatures. Communications: scientific letters of the University of Žilina 16 (3A), 130-135 (2014) [Google Scholar]
  25. A. Bokota, R. Parkitny, Modelling of thermal, structural and mechanical phenomena in hardening processes of steel elements. A. Piela [ed.]: Informatics in Metal Technology (Gliwice: Silesian Univ. Technol.), Ch. 7, 257-298 (2003) [Google Scholar]
  26. E. Geissler, H. W. Bergmann, Calculation of temperature profiles heating and quenching rates during laser processing. Opt. Mag. 3, 430-434 (1987) [Google Scholar]
  27. E. Geissler, H. W. Bergmann, 3D Temperature Fields in Laser Transformation Hardening, Part I: Quasi-Stationary Fields. Opt. Mag. 4, 396-403 (1988) [Google Scholar]
  28. J. Winczek, R. Parkitny, Modelling of heat affected zone in submerged arc welding butt joint with thorough penetration, Procedia Engineering 177C, 241-246 (2017) [CrossRef] [Google Scholar]
  29. W. Piekarska, M. Kubiak, M. Žmindak, Issues in numerical modeling of phase transformations in welded joints. Procedia Engineering 177, 141-148 (2017) [CrossRef] [Google Scholar]
  30. W. Piekarska, D. Goszczyńska-Króliszewska, Analytical methods of predicting the structure and mechanical properties of high tensile strength steel. Procedia Engineering 177, 92-98 (2017) [CrossRef] [Google Scholar]
  31. T. Domański, A, Bokota, Numerical models of hardening phenomena of tools steel base on the TTT and CCT diagrams. Arch. Metal. Mater. 56, 325-344 (2011) [Google Scholar]
  32. J. Winczek, The analysis of temporary temperature field and phase transformations in one-side butt-welded steel flats, Chapter 6 in: Joining Technologies, M. Ishak [ed.], Intech, Rijeka, Croatia 103-130 (2016) [Google Scholar]
  33. J. Winczek, A. Kulawik, Dilatometric and hardness analysis of C45 steel tempering with different heating-up rates. Metalurgija 51, 9-12 (2012) [Google Scholar]
  34. J. Winczek, K. Makles, M. Gucwa, R. Gnatowska, M. Hatala, Modelling of strains during SAW surfacing taking into heat of the weld in temperature field description and phase transformations. IOP Conf. Series: Materials Science and Engineering 225, 012038 doi:10.1088/1757-899X/225/1/012038 (2017) [Google Scholar]
  35. J. Gawąd, D. Szeliga, A. Bator, V. Pidvysockyy, M. Pietrzyk, Interpretation of the tensile test results interpretation based on two criterion optimization. Proc. 14. Conf. KomPlasTech, Informatics in Metal Technology, M. Pietrzyk et al. [ed.], Akapit, Cracow, 27-34 (2004) [Google Scholar]
  36. P. M. M. Vila Real, R. Cazeli, L. Simoes da Silva, A. Santiago, P. Piloto, The effect of residual stresses in the lateral-torsional buckling of steel I-beams at elevated temperature. J. Construct. Steel Research 60, 783-793 (2004) [CrossRef] [Google Scholar]
  37. M. Melander, A Computional and Experimental Investigation of Induction and Laser Hardening. Linkoping Studies Sci. Technol. 124, Linkoping Univeristy (1985) [Google Scholar]
  38. J. Lian, Z. Jiang, J. Liu, Theoretical model for the tensile work hardening behaviour of dual-phase steel. Mater. Sci. Eng. A147, 55-65 (1991) [CrossRef] [Google Scholar]
  39. S. K. Kim, Y. M. Kim, Y. J. Lim, N. J. Kim, Relationship between yield ratio and the material constants of the swift equation. Metals Materials Int. 12 (2), 131-135 (2006) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.