Open Access
| Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
|---|---|---|
| Article Number | 02016 | |
| Number of page(s) | 12 | |
| Section | Modelling and simulation, structural optimization | |
| DOI | https://doi.org/10.1051/matecconf/201815702016 | |
| Published online | 14 March 2018 | |
- K. J. Bathe, Finite Element Procedures. (Prentice Hall, New Jersey, 1982) [Google Scholar]
- A. Sapietová, V. Dekýš, Dynamic analysis of rotating machines in MSC.ADAMS. Procedia Engineering 136, 143-149 (2016) [CrossRef] [Google Scholar]
- M. Handrik, P. Kopas, V. Baniari, M. Vaško, M. Sága, Analysis of stress and strain of fatigue specimens localised in the cross-sectional area of the gauge section testing on bi-axial fatigue machine loaded in the high-cycle fatigue region. Procedia Engineering 177, 516-519 (2017) [CrossRef] [Google Scholar]
- W. Piekarska, M. Kubiak, Z. Saternus, Numerical simulation of deformations in T-joint welded by the laser beam. Archives of Metallurgy and Materials 58 (4) 1391-1396 (2013) [Google Scholar]
- A. Vaško, J. Belan, L. Kuchariková, E. Tillová, Low and high frequency fatigue tests of nodular cast irons. Metalurgija 56 (1-2), 25-28 (2017) [Google Scholar]
- ADINA, Theory and Modelling Guide. [help manual] (Watertown, 2010) [Google Scholar]
- P. Kopas, M. Blatnický, M. Sága, M. Vaško, Identification of mechanical properties of weld joints of AlMgSi07.F25 aluminium alloy. Metalurgija 56 (1-2), 99-102 (2017) [Google Scholar]
- J. Kortiš, L’. Daniel, M. Handrik, The Numerical Analysis of the Joint of the Steel Beam to the Timber Girder. Procedia Engineering 91, 160-164 (2014) [CrossRef] [Google Scholar]
- L. Jakubovičová, B. Ftorek, V. Baniari, A. Sapietová, T. Potoček, M. Vaško, Engineering Design of Test Device. Procedia Engineering 177, 520-525 (2017) [CrossRef] [Google Scholar]
- J. Gerlici, T. Lack, Contact geometry influence on the rail / wheel surface stress distribution. Procedia Engineering 2 (1), 2249-2257 (2010) [CrossRef] [Google Scholar]
- R. Grega, J. Homišin, J. Krajňák, M. Urbanský, Analysis of the impact of flexible couplings on gearbox vibrations. Scientific Journal of Silesian University of Technology-Series Transport 91, 43-50 (2016) [Google Scholar]
- R. Halama, A. Markopoulos, F. Fojtík, M. Fusek, Z. Poruba, J. Famfulík, Effect of stress amplitude on uniaxial ratcheting of aluminum alloy 2124-T851. Materialwissenschaft und Werkstofftechnik 48 (8), 814-819 (2017) [CrossRef] [Google Scholar]
- R. Grega, J. Krajňák, L. Žu’ová, G. Fedorko, V. Molnár, Failure analysis of driveshaft of truck body caused by vibrations. Engineering Failure Analysis 79, 208-215 (2017) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.