| Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
|---|---|---|
| Article Number | 01001 | |
| Number of page(s) | 8 | |
| Section | Methods and systems in machine design | |
| DOI | https://doi.org/10.1051/matecconf/201815701001 | |
| Published online | 14 March 2018 | |
Design of pallet, frame and chain of soldering station conveyor
1
Department of Applied Mechanics, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 1, 010 26, Žilina, Slovak Republic
2
Department of Transport and Handling Machines, Faculty of Mechanical Engineering, University of Žilina, Univerzitná 1, 010 26, Žilina, Slovak Republic
* Corresponding author: maria.blatnicka@fstroj.uniza.sk
The paper deals with constructional procedure and design of the soldering station for compressor outlet piping. The design of the mechanism is based on the need to create a device that will be able to move the pallet with the compressor between individual operational positions of the entire conveyor line.
Key words: Chain conveyor / constructional design / 3D modelling / soldering station
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.