MATEC Web Conf.
Volume 157, 2018Machine Modelling and Simulations 2017 (MMS 2017)
|Number of page(s)||6|
|Section||Methods and systems in machine design|
|Published online||14 March 2018|
Monitoring the fatigue crack on the test specimen during the cyclic loading
Faculty of Mechanical Engineering, Univerzity of Žilina. Unierzitná 1, 010 26 Žilina. Slovak Republic
2 Faculty of production technology and management of Jan Evangelista Purkyně University in Ústí nad Labem, Na Okraji 1001, Czech Republic
* Corresponding author: firstname.lastname@example.org
The main purpose of this paper is monitoring propagation of plastic area of fatigue crack. There were made notch on specimens and they were cyclically loaded with three-point bending. The record was evaluated after a certain number of loading cycles. The loading force is still constant throughout the measurement time for all specimens. The whole process was recorded using an infrared camera.
Key words: crack propagation / cyclic load / infrared / radiation
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.