Open Access
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
Article Number 05016
Number of page(s) 7
Section Experimental mechanics, identification and validation
Published online 14 March 2018
  1. Bauer, D. Wustenberg, Fracture Behavior of Polypropylene under Dynamic Cutting and Shearing. Actions in Granulators Chemical Engineering & Technology 25 (11), 1047-1051 (2002) [CrossRef] [Google Scholar]
  2. J. Flizikowski, Rozdrabnianie tworzyw sztucznych. WMN - ATR Bydgoszcz, (1998) [Google Scholar]
  3. H. Kalman, M. Hubert, E. Grant, Y. Petukhov, M. Haim, Fatigue behavior of impact comminution and attrition units. Powder Technology 146, 1- 9 (2004) [CrossRef] [Google Scholar]
  4. M. Sága, P. Kopas, M. Uhríčik, Modeling and experimental analysis of the aluminium alloy fatigue damage in the case of bending - torsion loading. Procedia Engineering 48, 599-606 (2012) [CrossRef] [Google Scholar]
  5. M. Sága, R. Bednár, M. Vaško, Contribution to modal and spectral interval finite element analysis. Vibration Problems ICOVP 2011, Springer Proceedings in Physics 139, 269-274 (2011) [Google Scholar]
  6. M. H. Pahl, Zerkleinerungstechnik. Praxiswissen Verfahrenstechnik. Mechanische Verfahrenstechnik: Auflage, Leipzig, (1997) [Google Scholar]
  7. F. K. Wittel, Single particle fragmentation in ultrasound assisted impact comminution. Granular Matter, Springer-Verlag (2010) [Google Scholar]
  8. T. Rydzkowski, Properties of recycled polymer mixtures obtained in the screw-disc extrusion process. Polimery 2011 56 (2), 135-139 (2011) [Google Scholar]
  9. T. Klepka, Construction of axial-symmetric polymeric extrudates of complex forms. Polimery 2008 53 (5), 390-395 (2008) [Google Scholar]
  10. K. Pepliński, P. Czyżewski, D. Górecki, D. Sykutera, M. Bieliński, Selected geometrical features and strength indicators of elements manufactured by fused deposition modeling technology. Polimery 2017 62 (3), 198-207 (2017) [Google Scholar]
  11. J. Flizikowski, T. Topoliński, M. Opielak, T. Tomporowski, A. Mroziński, Research and analysis of operating characteristics of energetic biomass micronizer. Eksploatacja i Niezawodnosc - Maintenance and Reliability 17 (1), 19-26 (2015) [CrossRef] [Google Scholar]
  12. A. Tomporowski, Filling model for the working multi-disc biomass grain grinding unit. Archive of Mechanical Engineering 59 (2), 155-174 (2012) [CrossRef] [Google Scholar]
  13. M. Macko, Metoda doboru rozdrabniaczy wielokrawędziowych do przeróbki materiałów polimerowych. Wyd. UKW, Bydgoszcz, (2011) [Google Scholar]
  14. M. Macko, Economic-energetic analysis of multi-edge comminution of polymer recyclates. Przemysł Chemiczny 92 (8), 1499-1502 (2013) [Google Scholar]
  15. G. Ԛmigielski, W. Toczek, R. Dygdała, K. Stefański, Metrological analysis of precision of the system of delivering a water capsule for explosive production of water aerosol. Metrology and Measurement Systems 23 (1), 47-58 (2016) [Google Scholar]
  16. M. Sasso, M. Fardmoshiri, E. Mancini, M. Rossi, L. Cortese, High speed imaging for material parameters calibration at high strain rate. Eur. Phys. J. Spec. Top. 225 (2), 225 - 295 (2016) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.