MATEC Web Conf.
Volume 157, 2018Machine Modelling and Simulations 2017 (MMS 2017)
|Number of page(s)||7|
|Section||Experimental mechanics, identification and validation|
|Published online||14 March 2018|
Fatigue limit estimation using IR camera
University of Žilina, Faculty of Mechanical Engineering, Department of Applied Mechanics, Slovak Republic
2 Center of Advanced Innovation Technologies, VŠB-Technical University Ostrava, Czech Republic
* Corresponding author: email@example.com
Determination of fatigue limit by traditional method is associated with testing of large number of specimens. This is caused by more scatter in test results and therefore a higher amount of tests are needed to generate a statistically reliable trend. The paper presents rapid and reliable estimation of fatigue limit using infrared thermography. By analysing the temperature of the material surface during cyclic loading it is possible to evaluate the dynamic behaviour of a structure and determine the fatigue limit. The method provides reliable results using a very little number of specimens in a very short time compared with traditional method.
Key words: Fatigue limit / Wöhler diagram / infrared camera / thermography
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.