Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
---|---|---|
Article Number | 01002 | |
Number of page(s) | 8 | |
Section | Methods and systems in machine design | |
DOI | https://doi.org/10.1051/matecconf/201815701002 | |
Published online | 14 March 2018 |
Structural design of soldering station chain conveyor working positions
1
Faculty of Mechanical Engineering, University of Žilina, Department of Transport and Handling Machines, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic
2
Faculty of Mechanical engineering, University of Žilina, Department of Applied Mechanics, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic
* Corresponding author: jan.dizo@fstroj.uniza.sk
The paper deals with design of the support and guide of the conveyor chain links, the individual working positions of the handling mechanism for the conveyor line, i.e. positions of manual loading of components on the line and automatic soldering of the component. The entire design will serve as an input for the dimensional calculation of the propulsion engine of the proposed conveyor line in order to enable the production of a real functional prototype.
Key words: chain conveyor / structural design / 3D modelling / soldering station
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.