MATEC Web Conf.
Volume 157, 2018Machine Modelling and Simulations 2017 (MMS 2017)
|Number of page(s)||8|
|Section||Experimental mechanics, identification and validation|
|Published online||14 March 2018|
Tensile and bending test of carbon/epoxy and carbon/geopolymer composites after temperature conditioning
European Centre of Excellence, NTIS – New Technologies for Information Society, University of West Bohemia, Univerzitní 8, 301 00 Plzeň, Czech Republic
2 Unipetrol Centre for Research and Education a.s., Revoluční 1521/84, 400 01 Ústí nad Labem, Czech Republic
* Corresponding author: firstname.lastname@example.org
Composites with epoxy matrix cannot be used in high temperature, while geopolymer matrix excel in high temperature resistance. First, prismatic specimens were subjected to conditioning temperature. Second, the tensile and bending test were performed at room temperature. This paper present comparison of mechanical properties of carbon/epoxy and carbon/geopolymer composites. Numerical simulations of tensile and bendidng tests were performed in finite element system Abaqus.
Key words: bending test / composite / geopolymer / numerical simulation / tensile test
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.