Open Access
| Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 8 | |
| Section | Modelling and simulation, structural optimization | |
| DOI | https://doi.org/10.1051/matecconf/201815702002 | |
| Published online | 14 March 2018 | |
- M. Handrik, P. Kopas, V. Baniari, M. Vaško, M. Sága, Analysis of stress and strain of fatigue specimens localised in the cross-sectional area of the gauge section testing on bi-axial fatigue machine loaded in the high-cycle fatigue region. Procedia Engineering 177, 516-519 (2017) [CrossRef] [Google Scholar]
- R. Halama, P. Macura, L. Pečenka, F. Fojtík, M. Šofer, Experimental Analysis of Residual Stresses in Backup Roll and FE Solution. Experimental Stress Analysis - 49th Int. Scient. Conf. on Experimental Stress Analysis, 85-90 (2011) [Google Scholar]
- K. J. Bathe, Finite Element Procedures. (Prentice Hall, New Jersey, 1982) [Google Scholar]
- L. Jakubovičová, M. Sága, Computational analysis of contact stress distribution in the case of mutual stewing of roller bearing rings. Novel Trends in Production Devices and Systems, Applied mechanics and materials 474, 363-368 (2014) [Google Scholar]
- J. Gerlici, T. Lack, Modified HHT method for vehicle vibration analysis in time domain utilisation. Applied mechanics and materials 486, 396-405 (2014) [CrossRef] [Google Scholar]
- J. Ondrouch, P. Ferfecki, Z. Poruba, Active vibration reduction of rigid rotor by kinematic excitation of bushes of journal bearings. Metalurgija 49 (2), 107-110 (2010) [Google Scholar]
- R. Grega, J. Homišin, J. Krajňák, M. Urbanský, Analysis of the impact of flexible couplings on gearbox vibrations. Scientific Journal of Silesian University of Technology-Series Transport 91, 43-50 (2016) [Google Scholar]
- A. Sapietová, V. Dekýš, Dynamic analysis of rotating machines in MSC.ADAMS. Procedia Engineering 136, 143-149 (2016) [CrossRef] [Google Scholar]
- R. Grega, J. Krajňák, L. Žul’ová, G. Fedorko, V. Molnár, Failure analysis of driveshaft of truck body caused by vibrations. Engineering Failure Analysis 79, 208-215 (2017) [CrossRef] [Google Scholar]
- J. Vavro, J. Vavro jr., P. Kováčiková, R. Bezdedová, The optimization of the materials properties for the passenger cars in dependence on defect distribution at the dynamic loading. Procedia Engineering 136, 114-119 (2016) [CrossRef] [Google Scholar]
- A. Vaško, J. Belan, L. Kuchariková, E. Tillová, Low and high frequency fatigue tests of nodular cast irons. Metalurgija 56 (1-2), 25-28 (2017) [Google Scholar]
- J. Rojek, M. Hyrcza-Michalska, A. Bokota, W. Piekarska, Determination of mechanical properties of the weld zone in tailor-welded blanks. Archives of Civil and Mechanical Engineering 12 (2), 156-162 (2012) [CrossRef] [Google Scholar]
- P. Kopas, M. Blatnický, M. Sága, M. Vaško, Identification of mechanical properties of weld joints of AlMgSi07.F25 aluminium alloy. Metalurgija 56 (1-2), 99-102 (2017) [Google Scholar]
- V. Bulej, J. Uricek, V. Poppeova, R. Zahoransky, M. Rupikova, Study of the Workspace of Hybrid Mechanism Trivariant. Appl. Mech. and Mat., Mech. Eng. and Manufacturing 436, 366-373 (2013) [Google Scholar]
- M. Bruna, D. Bolibruchova, R. Pastircak, Numerical simulation of porosity for Al based alloys. Procedia Engineering 177, 488-495 (2017) [CrossRef] [Google Scholar]
- M. Sága, P. Kopas, M. Uhríčik, Modeling and experimental analysis of the aluminium alloy fatigue damage in the case of bending-torsion loading. Procedia Engineering 48, 599-606 (2012) [CrossRef] [Google Scholar]
- B. Strnadel, P. Ferfecki, P. Židlík, Statistical characteristics of fracture surfaces in X70 steel DWTT samples. Engineering Fracture Mechanics 112, 1-13 (2013) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.