Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
---|---|---|
Article Number | 01006 | |
Number of page(s) | 7 | |
Section | Methods and systems in machine design | |
DOI | https://doi.org/10.1051/matecconf/201815701006 | |
Published online | 14 March 2018 |
Diagnosis of machine tool with using Renishaw ball-bar system
1
Faculty of Mechanical Engineering, VŠB – Technical University of Ostrava, 17. Listopadu 15/2172 708 33, Ostrava, Czech Republic
2
Faculty of Mechanical Engineering, University of Zilina, Univerzitna 8215/1, 010 26 Zilina, Slovakia
* Corresponding author: rober.cep@vsb.cz
The article deals with accuracy of machine tools. The aim was to determine the accuracy with which already operates used machine – HAAS CNC Milling machine MiniMill. For evaluation of accuracy of the machine tool was used Renishaw QC20-W Ballbar system, which has the Department of Machining, Assembly and Engineering Metrology of VŠB – TUO. The theoretical part describes the measurement principle using a telescopic Ballbar system. The principle of measurement is the comparison of the actual deviation from the ideal circle which is programmed. Experimental part is focused on the diagnosis of the whole process by the direct method of measurement during changing feed rate. Specifically, the determination of circularity deviation at machine tool was in accordance with international standards, e.g. ISO 230-4.
Key words: ball-bar system / milling machine / circularity / circularity deviation
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.