Open Access
| Issue |
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
|
|
|---|---|---|
| Article Number | 04005 | |
| Number of page(s) | 12 | |
| Section | Advanced industrial, automotive and green energy applications | |
| DOI | https://doi.org/10.1051/matecconf/201815704005 | |
| Published online | 14 March 2018 | |
- K. Kim, H. Guan, B. Wang, R. Guo, F. Liang, Active steering control strategy for articulated vehicles, Front. Inf. Technol. Electron. Eng. 17, 576-586 (2016) [CrossRef] [Google Scholar]
- S. T. Oreh, R. Kazemi, S. Azadi, A new desired articulation angle for directional control of articulated vehicles, Proc. Inst. Mech. Eng. Part K J. Multi-body Dyn. 226, 298-314 (2012) [Google Scholar]
- R. Rusev, R. Ivanov, G. Staneva, G. Kadikyanov, A Study of the Dynamic Parameters Influence Over the Behavior of the Two-Section Articulated Vehicle During the Lane Change Manoeuvre, Transp. Probl. 11, 29-40 (2016) [CrossRef] [Google Scholar]
- H. Dugoff, P. Fancher, L. Segel, An Analysis of Tire Traction Properties and Their Influence on Vehicle Dynamic Performance, SAE Trans. 79 (1970) [Google Scholar]
- O.A. Bauchau, H. Liu, On the Modeling of Hydraulic Components in Rotorcraft Systems, Journal of the American Helicopter Society 51, 175-184 (2006) [CrossRef] [Google Scholar]
- B. Titurus, J. L. du Bois, N. Lieven, Modeling and testing of a semiactive hydraulic damper in periodic working regimes, AIAA Journal 50, 844-854 (2012) [CrossRef] [Google Scholar]
- G. Rosvall, H. Elinder, Accident involving a Mercedes Benz articulated bus, registration no STK 595, on Glömstavägen in Stockholm/Huddinge, AB County, Sweden, on the 2nd of April 2002, The Swedish Accident Investigation Board, Report RO 2003:01e, ISSN 1400-5751 (2003) [Google Scholar]
- S. Łuczak, Tilt Measurements in BMW Motorcycles, in R. Jabłoński, R. Szewczyk (Eds.), Recent Global Research and Education: Technological Challenges. (Springer International Publishing, Cham, Switzerland, 2017) [Google Scholar]
- SKF Poradnik Obsługi Technicznej Łożysk, (SKF Group, 2010) [Google Scholar]
- M. Looney, An Introduction to MEMS Vibration Monitoring, Analog Dialogue 48-06, (Analog Devices, USA, 2014) [Google Scholar]
- R. Heaton, S. Hewitt, The use of Operating Deflection Shapes (ODS) to model the vibration of sanders and polishers. (Health&Safety Laboratory, Buxton, UK, 2006) [Google Scholar]
- S. Łuczak, Fast Alignment Procedure for MEMS Accelerometers, in R. Jabłoński, T. Brezina (Eds.), Advanced Mechatronics Solutions. (Springer International Publishing, Cham, Switzerland, 2016) [Google Scholar]
- S. Łuczak, Experimental Studies of Hysteresis in MEMS Accelerometers: A Commentary. IEEE Sensors J. 15, 3492-3499 (2015) [CrossRef] [Google Scholar]
- S. Łuczak, Guidelines for Tilt Measurements Realized by MEMS Accelerometers. Int. J. Precis. Eng. Manuf. 15, 2012-2019 (2014) [Google Scholar]
- S. Łuczak, R. Grepl, M. Bodnicki, Selection of MEMS Accelerometers for Tilt Measurements, J. Sensors 2017, Article ID 9796146 (2017) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.