Open Access
Issue
MATEC Web Conf.
Volume 157, 2018
Machine Modelling and Simulations 2017 (MMS 2017)
Article Number 02055
Number of page(s) 10
Section Modelling and simulation, structural optimization
DOI https://doi.org/10.1051/matecconf/201815702055
Published online 14 March 2018
  1. I. Havran, Prestressed concrete. [in Slovak] (STU Bratislava, Bratislava, 2010) [Google Scholar]
  2. L. Vítek, Building materials. [in Czech] (VUT Brno, Brno, 2012) [Google Scholar]
  3. A. Vaško, J. Belan, Fatigue tests of nodular cast iron at low and high frequency cyclic loading. Materials Today-Proceedings 4 (5), 5985-5988 (2017) [CrossRef] [Google Scholar]
  4. P. Kopas, L. Jakubovičová, M. Vaško, M. Handrik, Fatigue Resistance of Reinforcing Steel Bars. Procedia Engineering 136, 193–197 (2016) [CrossRef] [Google Scholar]
  5. G. Domek, A. Kołodziej, Design of the tendon structure in timing belts. Procedia Engineering 136, 365-369 (2016) [CrossRef] [Google Scholar]
  6. R. Grega, J. Krajňák, L. Žul’ová, G. Fedorko, V. Molnár, Failure analysis of driveshaft of truck body caused by vibrations. Engineering Failure Analysis 79, 208-215 (2017) [CrossRef] [Google Scholar]
  7. M. Bara, T. Kmita, J. Korzekwa, Microstructure and properties of composite coatings obtained on aluminium alloys. Archives of Metallurgy and Materials 61 (3), 1107-1112 (2016) [CrossRef] [Google Scholar]
  8. W. Piekarska, M. Kubiak, Z. Saternus, Numerical simulation of deformations in T-joint welded by the laser beam. Archives of Metallurgy and Materials 58 (4) 1391-1396 (2013) [Google Scholar]
  9. J. Stancek, V. Bulej, Design of driving system for scissor lifting mechanism. Acad. J. of Manufacturing Eng. 13, 38-43 (2015) [Google Scholar]
  10. A. Čavojcová, Resistance enhancing of concrete constructions stressed by cyclic loading. [Dissertation work, in Slovak], 130 p. (2016) [Google Scholar]
  11. K. J. Bathe, Finite Element Procedures. (Prentice Hall, New Jersey, 1982) [Google Scholar]
  12. ADINA, Theory and Modelling Guide, Vol. III, CFD and FSI. [help manual]. (2017) [Google Scholar]
  13. L. Jakubovičová, M. Sága, Computational analysis of contact stress distribution in the case of mutual stewing of roller bearing rings. Novel Trends in Production Devices and Systems, Applied Mechanics and Materials 474, 363-368 (2014) [Google Scholar]
  14. Z. Stankovičová, V. Dekýš, P. Novák, Time average synchronization in thermoelastic stress analysis. Procedia Engineering 136, 204-210 (2016) [CrossRef] [Google Scholar]
  15. P. Pastorek, P. Novák, P. Kopas, M. Močilan, Finite element analysis of bond behavior in a steel reinforced concrete structure strengthened carbon fibre reinforced polymer (CFRP) strips. Metalurgija 56 (3-4), 405-408 (2017) [Google Scholar]
  16. M. Žmindák, P. Novák, V. Dekýš, Analysis of bond behaviour in strengthened reinforced concrete beam with carbon fiber reinforced polymer lamella. MATEC Web of Conferences 107 (UNSP 00045), 1-7 (2017) [Google Scholar]
  17. M. Handrik, P. Kopas, V. Baniari, M. Vaško, M. Sága, Analysis of stress and strain of fatigue specimens localised in the cross-sectional area of the gauge section testing on bi-axial fatigue machine loaded in the high-cycle fatigue region. Procedia Engineering 177, 516-519 (2017) [CrossRef] [Google Scholar]
  18. A. Sapietová, V. Dekýš, M. Sapieta, P. Pecháč, Application of computational and design approaches to improve carrier stability. Procedia Engineering 96, 410-418 (2014) [Google Scholar]
  19. B. Leitner, The procedure of fatigue damage estimation for mechanical structures under service loading. Transport Means 2014, 54-58 (2014) [Google Scholar]
  20. R. Halama, P. Macura, L. Pečenka, F. Fojtík, M. Šofer, Experimental Analysis of Residual Stresses in Backup Roll and FE solution. Experimental stress analysis, 49th Int. Scient. Conf. on Experimental Stress Analysis, 85-90 (2011) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.